Two Strategies to Enhance Ungual Drug Permeation from UV-cured Films: Incomplete Polymerisation to Increase Drug Release and Incorporation of Chemical Enhancers

UV-curable gels, which polymerise into long-lasting films upon exposure to UVA, have been identified as potential topical drug carriers for the treatment of nail diseases. Limitations of such films include incomplete drug release and low ungual drug permeation. The aim of the work herein was therefore to investigate two strategies, namely: (1) increasing drug release from the film, and (2) increasing nailplate permeability, with the ultimate goal of enhancing ungual drug permeation. To increase drug release via Strategy 1, a UV-LED lamp (whose emitted light was suboptimal for gel polymerisation) was used, and it was hypothesised that such a lamp would result in films that are less polymerised/cross-linked and where the drugs are less ‘trapped’. Indeed, the suboptimal lamp influenced polymerisation, such that the films were thinner, had lower glass transition temperatures and enabled a slightly greater (by 15%) drug release of one of the two drugs tested. However, the greater drug release had only a modest impact on ungual drug permeation. To evaluate Strategy 2, i.e. increase nailplate permeability, chemical ungual enhancers, 2-mercaptoethanol (ME), 2-methyl pyrrolidone (NMP), PEG 200 and water were incorporated within the UV-cured films. These chemicals caused increased ungual drug permeation, with ME showing the greatest (by 140%), and water showing the least (by 20%) increase in the amount of drug permeated by day 30. Surprisingly, these chemicals also caused increased drug release from the films, with ME once again having the greatest effect (by 51%) and water the least effect (by 12%). It seems that these chemicals were increasing ungual drug permeation via their influence on drug release (i.e. via their impact on the film) as well as via their influence on the nail itself. We conclude that, of the two strategies tested, the second strategy proved to be more successful at enhancing ungual drug permeation.Peer reviewe

Intranasal Vaccine Formulation: Advancing Towards Nasal Dry Powder Formulation

© 2023 The Author(s). Published by University of Huddersfield Press. This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY), https://creativecommons.org/licenses/by/4.0/Unlike conventional mRNA vaccines, intranasal vaccines display several advantages, including the ability to generate strong mucosal immunity. However, the formulation challenges associated with intranasal mRNA vaccines have so far hindered their extensive application and further research in the area of formulation development and optimisation are required before translation. This study aims to optimise the manufacturing conditions of inhalable dry powders by examining the impact of temperature and lipid composition on liposome particle size and the effect of spray-drying parameters on the particle size of spray-dried powders. The results indicate that liposomes generated at 20°C exhibited notably larger sizes than those produced at 55°C, irrespective of the lipid composition. Notably, dry powder formulations featuring larger particle sizes were achieved at a low gas flow rate of 25mm.Peer reviewe

Anti-fungal bandages containing cinnamon extract

© 2019 The Authors. International Wound Journal published by Medicalhelplines.com Inc and John Wiley & Sons Ltd.Cinnamon-containing polycaprolactone (PCL) bandages were produced by pressurised gyration and their anti-fungal activities against Candida albicans were investigated. It was found that by preparing and spinning polymer solutions of cinnamon with PCL, fibres capable of inhibiting fungal growth could be produced, as observed in disk diffusion tests for anti-fungal susceptibility. Fascinatingly, compared with raw cinnamon powder, the novel cinnamon-loaded fibres had outstanding long-term activity. The results presented here are very promising and may indeed accelerate a new era of using completely natural materials in biomedical applications, especially in wound healing.Peer reviewe

Synergistic Antifungal Study of PEGylated Graphene Oxides and Copper Nanoparticles against Candida albicans

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).The coupling reactions of polyethylene glycol (PEG) with two different nano-carbonaceous materials, graphene oxide (GO) and expanded graphene oxide (EGO), were achieved by amide bond formations. These reactions yielded PEGylated graphene oxides, GO-PEG and EGO-PEG. Whilst presence of the newly formed amide links (NH-CO) were confirmed by FTIR stretches observed at 1732 cm−1 and 1712 cm−1, the associated Raman D- and G-bands resonated at 1311/1318 cm−1 and 1584/1595 cm−1 had shown the carbonaceous structures in both PEGylated products remain unchanged. Whilst SEM images revealed the nano-sheet structures in all the GO derivatives (GO/EGO and GO-PEG/EGO-PEG), TEM images clearly showed the nano-structures of both GO-PEG and EGO-PEG had undergone significant morphological changes from their starting materials after the PEGylated processes. The successful PEGylations were also indicated by the change of pH values measured in the starting GO/EGO (pH 2.6–3.3) and the PEGylated GO-PEG/EGO-PEG (pH 6.6–6.9) products. Initial antifungal activities of selective metallic nanomaterials (ZnO and Cu) and the four GO derivatives were screened against Candida albicans using the in vitro cut-well method. Whilst the haemocytometer count indicated GO-PEG and copper nanoparticles (CuNPs) exhibited the best antifungal effects, the corresponding SEM images showed C. albicans had, respectively, undergone extensive shrinkage and porosity deformations. Synergistic antifungal effects all GO derivatives in various ratio of CuNPs combinations were determined by assessing C. albicans viabilities using broth dilution assays. The best synergistic effects were observed when a 30:70 ratio of GO/GO-PEG combined with CuNPs, where MIC50 185–225 μm/mL were recorded. Moreover, the decreased antifungal activities observed in EGO and EGO-PEG may be explained by their poor colloidal stability with increasing nanoparticle concentrations.Peer reviewe

UV-curable gel formulations: Potential drug carriers for the topical treatment of nail diseases

Nail diseases are common, cause significant distress and treatments are far from successful. Our aim was to investigate the potential of UV-curable gels - currently used as cosmetics - as topical drug carriers for their treatment. These formulations have a long residence on the nail, which is expected to increase patient compliance and the success of topical therapy. The gels are composed of the diurethane dimethacrylate, ethyl methacrylate, 2-hydroxy-2-methylpropiophenone, an antifungal drug (amorolfine HCl or terbinafine HCl) and an organic liquid (ethanol or NMP) as drug solvent. Following its application to a substrate and exposure to a UVA lamp for 2 min, the gel polymerises and forms a smooth, glossy and amorphous film, with negligible levels of residual monomers. No drug-polymer interactions were found and drug loading did not affect the film's properties, such as thickness, crystallinity and transition temperatures. In contrast, the organic solvent did influence the film's properties; NMP-containing films had lower glass transition temperatures, adhesion and water resistance than ethanol-based ones. Water-resistance being a desired property, ethanol-based formulations were investigated further for stability, drug release and ungual permeation. The films were stable under accelerated stability testing conditions. Compared to terbinafine, amorolfine was released to a greater extent, had a higher ungual flux, but a lower concentration in the nailplate. However, both drugs were present at considerably high levels in the nail when their MICs are taken into account. We thus conclude that UV-curable gels are promising candidates as topical nail medicines

The use of optical differential scanning calorimetry to investigate ibuprofen miscibility in polymeric films for topical drug delivery

© 2021 Published by Elsevier B.V. This is the accepted manuscript version of an article which has been published in final form at https://doi.org/10.1016/j.ejpb.2021.10.004Understanding drug miscibility in pharmaceutically relevant systems is essential for the development and optimisation of pharmaceutical dosage forms. This is particularly true for film forming systems which are designed to become supersaturated with drug, following application on the skin surface, whilst maintaining the physical stability of the drug for a suitable period to enhance drug delivery. For such formulations, chemical penetration enhancers as well as the drug are absorbed from the formulation into the skin, making understanding drug delivery from the films challenging. This study investigated the use of an optical differential scanning calorimetry (DSC) to understand drug miscibility in polymeric film forming systems and explain drug transport behaviour from film forming formulations, containing ibuprofen, a copolymer based on dimethylaminoethyl methacrylate, butyl methacrylate, and methyl methacrylate (Eudragit® E, EuE), a copolymer based on ethyl acrylate, methyl methacrylate and methacrylic acid ester with quaternary ammonium groups (Eudragit® RS, EuRS) and a copolymer based on methacrylic acid and methyl methacrylate (Eudragit® S, EuS), with and without the chemical penetration enhancer propylene glycol, across a model membrane. The optical DSC enabled the rapid screening of not only drug-polymer miscibility, but also drug-vehicle miscibility, while considering both the melting-point depression and melting enthalpy of the drug due to the presence of the polymer/polymer-based vehicle, obtained via thermal analysis by structural characterisation (TASC) and DSC analysis, respectively. The results obtained enable the polymers studied to be ranked in the order of EuE > EuRS > EuS, with EuE being more miscible with ibuprofen, and the incorporation of a penetration enhancer in the film forming system formulation was found to increase ibuprofen solubility in EuE- and EuRS- based films. The drug-polymer/vehicle miscibility information obtained via optical DSC provided understanding of drug transport from film forming systems with the higher miscibility of ibuprofen with EuE reducing drug transport through decreasing drug saturation in the film. The higher drug transport from films containing EuRS and EuS could also be linked to drug miscibility with the polymer and showed dependence on ibuprofen loading in the formulation. Overall optical DSC has been demonstrated to be a valuable tool for determining drug-vehicle miscibility for pharmaceutical product development.Peer reviewe