An Energy Based Nanomechanical Properties Evaluation Method for Cementitious Materials

Advances in multiscale material modeling of structural concrete have created an upsurge of interest in the accurate evaluation of mechanical properties and volume fractions of its nano constituents. The task is accomplished by analyzing the response of a material to indentation, obtained as an outcome of a nanoindentation experiment, using a procedure called the Oliver and Pharr (OP) method. Despite its widespread use, the accuracy of this method is often questioned when it is applied to the data from heterogeneous materials or from the materials that show pile-up and sink-in during indentation, which necessitates the development of an alternative method. In this study, a model is developed within the framework defined by contact mechanics to compute the nanomechanical properties of a material from its indentation response. Unlike the OP method, indentation energies are employed in the form of dimensionless constants to evaluate model parameters. Analysis of the load-displacement data pertaining to a wide range of materials revealed that the energy constants may be used to determine the indenter tip bluntness, hardness and initial unloading stiffness of the material. The proposed model has two main advantages: (1) it does not require the computation of the contact area, a source of error in the existing method; and (2) it incorporates the effect of peak indentation load, dwelling period and indenter tip bluntness on the measured mechanical properties explicitly. Indentation tests are also carried out on samples from cement paste to validate the energy based model developed herein by determining the elastic modulus and hardness of different phases of the paste. As a consequence, it has been found that the model computes the mechanical properties in close agreement with that obtained by the OP method; a discrepancy, though insignificant, is observed more in the case of C-S-H than in the anhydrous phase. Nevertheless, the proposed method is computationally efficient, and thus it is highly suitable when the grid indentation technique is required to be performed. In addition, several empirical relations are developed that are found to be crucial in understanding the nanomechanical behavior of cementitious materials

Assessing the level of healthcare information technology adoption in the United States: a snapshot

BACKGROUND: Comprehensive knowledge about the level of healthcare information technology (HIT) adoption in the United States remains limited. We therefore performed a baseline assessment to address this knowledge gap. METHODS: We segmented HIT into eight major stakeholder groups and identified major functionalities that should ideally exist for each, focusing on applications most likely to improve patient safety, quality of care and organizational efficiency. We then conducted a multi-site qualitative study in Boston and Denver by interviewing key informants from each stakeholder group. Interview transcripts were analyzed to assess the level of adoption and to document the major barriers to further adoption. Findings for Boston and Denver were then presented to an expert panel, which was then asked to estimate the national level of adoption using the modified Delphi approach. We measured adoption level in Boston and Denver was graded on Rogers' technology adoption curve by co-investigators. National estimates from our expert panel were expressed as percentages. RESULTS: Adoption of functionalities with financial benefits far exceeds adoption of those with safety and quality benefits. Despite growing interest to adopt HIT to improve safety and quality, adoption remains limited, especially in the area of ambulatory electronic health records and physician-patient communication. Organizations, particularly physicians' practices, face enormous financial challenges in adopting HIT, and concerns remain about its impact on productivity. CONCLUSION: Adoption of HIT is limited and will likely remain slow unless significant financial resources are made available. Policy changes, such as financial incentivesto clinicians to use HIT or pay-for-performance reimbursement, may help health care providers defray upfront investment costs and initial productivity loss

Challenges and opportunities associated with waste management in India

India faces major environmental challenges associated with waste generation and inadequate waste collection, transport, treatment and disposal. Current systems in India cannot cope with the volumes of waste generated by an increasing urban population, and this impacts on the environment and public health. The challenges and barriers are significant, but so are the opportunities. This paper reports on an international seminar on ‘Sustainable solid waste management for cities: opportunities in South Asian Association for Regional Cooperation (SAARC) countries’ organized by the Council of Scientific and Industrial Research-National Environmental Engineering Research Institute and the Royal Society. A priority is to move from reliance on waste dumps that offer no environmental protection, to waste management systems that retain useful resources within the economy. Waste segregation at source and use of specialized waste processing facilities to separate recyclable materials has a key role. Disposal of residual waste after extraction of material resources needs engineered landfill sites and/or investment in waste-to-energy facilities. The potential for energy generation from landfill via methane extraction or thermal treatment is a major opportunity, but a key barrier is the shortage of qualified engineers and environmental professionals with the experience to deliver improved waste management systems in India

Investigating and learning lessons from early experiences of implementing ePrescribing systems into NHS hospitals:a questionnaire study

Background: ePrescribing systems have significant potential to improve the safety and efficiency of healthcare, but they need to be carefully selected and implemented to maximise benefits. Implementations in English hospitals are in the early stages and there is a lack of standards guiding the procurement, functional specifications, and expected benefits. We sought to provide an updated overview of the current picture in relation to implementation of ePrescribing systems, explore existing strategies, and identify early lessons learned.Methods: a descriptive questionnaire-based study, which included closed and free text questions and involved both quantitative and qualitative analysis of the data generated.Results: we obtained responses from 85 of 108 NHS staff (78.7% response rate). At least 6% (n = 10) of the 168 English NHS Trusts have already implemented ePrescribing systems, 2% (n = 4) have no plans of implementing, and 34% (n = 55) are planning to implement with intended rapid implementation timelines driven by high expectations surrounding improved safety and efficiency of care. The majority are unclear as to which system to choose, but integration with existing systems and sophisticated decision support functionality are important decisive factors. Participants highlighted the need for increased guidance in relation to implementation strategy, system choice and standards, as well as the need for top-level management support to adequately resource the project. Although some early benefits were reported by hospitals that had already implemented, the hoped for benefits relating to improved efficiency and cost-savings remain elusive due to a lack of system maturity.Conclusions: whilst few have begun implementation, there is considerable interest in ePrescribing systems with ambitious timelines amongst those hospitals that are planning implementations. In order to ensure maximum chances of realising benefits, there is a need for increased guidance in relation to implementation strategy, system choice and standards, as well as increased financial resources to fund local activitie

Systematic review of the safety of medication use in inpatient, outpatient and primary care settings in the Gulf Cooperation Council countries

Background Errors in medication use are a patient safety concern globally, with different regions reporting differing error rates, causes of errors and proposed solutions. The objectives of this review were to identify, summarise, review and evaluate published studies on medication errors, drug related problems and adverse drug events in the Gulf Cooperation Council (GCC) countries. Methods A systematic review was carried out using six databases, searching for literature published between January 1990 and August 2016. Research articles focussing on medication errors, drug related problems or adverse drug events within different healthcare settings in the GCC were included. Results Of 2094 records screened, 54 studies met our inclusion criteria. Kuwait was the only GCC country with no studies included. Prescribing errors were reported to be as high as 91% of a sample of primary care prescriptions analysed in one study. Of drug-related admissions evaluated in the emergency department the most common reason was patient non-compliance. In the inpatient care setting, a study of review of patient charts and medication orders identified prescribing errors in 7% of medication orders, another reported prescribing errors present in 56% of medication orders. The majority of drug related problems identified in inpatient paediatric wards were judged to be preventable. Adverse drug events were reported to occur in 8.5–16.9 per 100 admissions with up to 30% judged preventable, with occurrence being highest in the intensive care unit. Dosing errors were common in inpatient, outpatient and primary care settings. Omission of the administered dose as well as omission of prescribed medication at medication reconciliation were common. Studies of pharmacists’ interventions in clinical practice reported a varying level of acceptance, ranging from 53% to 98% of pharmacists’ recommendations. Conclusions Studies of medication errors, drug related problems and adverse drug events are increasing in the GCC. However, variation in methods, definitions and denominators preclude calculation of an overall error rate. Research with more robust methodologies and longer follow up periods is now required.Peer reviewe

Assessing the level of healthcare information technology adoption in the United States: a snapshot

BACKGROUND: Comprehensive knowledge about the level of healthcare information technology (HIT) adoption in the United States remains limited. We therefore performed a baseline assessment to address this knowledge gap. METHODS: We segmented HIT into eight major stakeholder groups and identified major functionalities that should ideally exist for each, focusing on applications most likely to improve patient safety, quality of care and organizational efficiency. We then conducted a multi-site qualitative study in Boston and Denver by interviewing key informants from each stakeholder group. Interview transcripts were analyzed to assess the level of adoption and to document the major barriers to further adoption. Findings for Boston and Denver were then presented to an expert panel, which was then asked to estimate the national level of adoption using the modified Delphi approach. We measured adoption level in Boston and Denver was graded on Rogers' technology adoption curve by co-investigators. National estimates from our expert panel were expressed as percentages. RESULTS: Adoption of functionalities with financial benefits far exceeds adoption of those with safety and quality benefits. Despite growing interest to adopt HIT to improve safety and quality, adoption remains limited, especially in the area of ambulatory electronic health records and physician-patient communication. Organizations, particularly physicians' practices, face enormous financial challenges in adopting HIT, and concerns remain about its impact on productivity. CONCLUSION: Adoption of HIT is limited and will likely remain slow unless significant financial resources are made available. Policy changes, such as financial incentivesto clinicians to use HIT or pay-for-performance reimbursement, may help health care providers defray upfront investment costs and initial productivity loss

Qualitative analysis of vendor discussions on the procurement of Computerised Physician Order Entry and Clinical Decision Support systems in hospitals

Objectives: We studied vendor perspectives about potentially transferable lessons for implementing organisations and national strategies surrounding the procurement of Computerised Physician Order Entry (CPOE)/Clinical Decision Support (CDS) systems in English hospitals. Setting: Data were collected from digitally audio-recorded discussions from a series of CPOE/CDS vendor round-table discussions held in September 2014 in the UK. Participants: Nine participants, representing 6 key vendors operating in the UK, attended. The discussions were transcribed verbatim and thematically analysed. Results: Vendors reported a range of challenges surrounding the procurement and contracting processes of CPOE/CDS systems, including hospitals’ inability to adequately assess their own needs and then select a suitable product, rushed procurement and implementation processes that resulted in difficulties in meaningfully engaging with vendors, as well as challenges relating to contracting leading to ambiguities in implementation roles. Consequently, relationships between system vendors and hospitals were often strained, the vendors attributing this to a lack of hospital management's appreciation of the complexities associated with implementation efforts. Future anticipated challenges included issues surrounding the standardisation of data to enable their aggregation across systems for effective secondary uses, and implementation of data exchange with providers outside the hospital. Conclusions: Our results indicate that there are significant issues surrounding capacity to procure and optimise CPOE/CDS systems among UK hospitals. There is an urgent need to encourage more synergistic and collaborative working between providers and vendors and for a more centralised support for National Health Service hospitals, which draws on a wider body of experience, including a formalised procurement framework with value-based product specifications

Recommended practices for computerized clinical decision support and knowledge management in community settings: a qualitative study

<p>Abstract</p> <p>Background</p> <p>The purpose of this study was to identify recommended practices for computerized clinical decision support (CDS) development and implementation and for knowledge management (KM) processes in ambulatory clinics and community hospitals using commercial or locally developed systems in the U.S.</p> <p>Methods</p> <p>Guided by the Multiple Perspectives Framework, the authors conducted ethnographic field studies at two community hospitals and five ambulatory clinic organizations across the U.S. Using a Rapid Assessment Process, a multidisciplinary research team: gathered preliminary assessment data; conducted on-site interviews, observations, and field surveys; analyzed data using both template and grounded methods; and developed universal themes. A panel of experts produced recommended practices.</p> <p>Results</p> <p>The team identified ten themes related to CDS and KM. These include: 1) workflow; 2) knowledge management; 3) data as a foundation for CDS; 4) user computer interaction; 5) measurement and metrics; 6) governance; 7) translation for collaboration; 8) the meaning of CDS; 9) roles of special, essential people; and 10) communication, training, and support. Experts developed recommendations about each theme. The original Multiple Perspectives framework was modified to make explicit a new theoretical construct, that of Translational Interaction.</p> <p>Conclusions</p> <p>These ten themes represent areas that need attention if a clinic or community hospital plans to implement and successfully utilize CDS. In addition, they have implications for workforce education, research, and national-level policy development. The Translational Interaction construct could guide future applied informatics research endeavors.</p