68 research outputs found

    Mechanism of action of an antioxidant active packaging prepared with Citrus extract

    Get PDF
    yesActive packaging consisting of polyethylene terephthalate (PET) trays coated with a Citrus extract, without and with plasma pre-treatment, can reduce lipid oxidation in cooked meat. The mechanism of action of the packaging was investigated by quantifying the extent of transfer of antioxidant components from the active packaging into cooked turkey meat. Kinetic studies revealed the affinity for water of phenolic compounds and carboxylic acids in the Citrus extract, suggesting their diffusion into the water phase of the meat facilitated their antioxidant effect. Analysis by high-performance liquid chromatography permitted the identification of carboxylic acids and flavanones as major components of the extract. Their quantification in meat after contact with the trays revealed a release of 100% of the total coated amount for citric acid, 30% for salicylic acid, 75% for naringin and 58% for neohesperidin, supporting the release of these components into cooked meat as a mechanism of action of the antioxidant active packaging

    Physicochemical and Antibacterial Characterisation of a Novel Fluorapatite Coating

    Get PDF
    Peri-implantitis remains the major impediment to the long-term use of dental implants. With increasing concern over growing antibiotic resistance there is considerable interest in the preparation of antimicrobial dental implant coatings that also induce osseointegration. One such potential coating material is fluorapatite (FA). The aim of this study was to relate the antibacterial effectiveness of FA coatings against pathogens implicated in peri-implantitis to the physicochemical properties of the coating. Ordered and disordered FA coatings were produced on the under and upper surface of stainless steel (SS) discs respectively, using a hydrothermal method. Surface charge, surface roughness, wettability and fluoride release were measured for each coating. Surface chemistry was assessed by X-ray photoelectron spectroscopy and FA crystallinity by X-ray diffraction. Antibacterial activity against periodontopathogens was assessed in vitro using viable counts, confocal and scanning electron (SEM) microscopies. SEM showed that the hydrothermal method produced FA coatings predominately aligned perpendicular to the SS substrate or disordered FA coatings consisting of randomly aligned rod-like crystals. Both FA coatings significantly reduced the growth of all the examined bacterial strains in comparison to the control. The FA coatings, and especially the disordered ones, presented significantly lower charge, higher roughness and area when compared to the control, enhancing bacteria–material interactions and therefore bacterial deactivation by fluoride ions. The ordered FA layer reduced not only bacterial viability but adhesion too. Ordered FA crystals produced as a potential novel implant coating showed significant antibacterial activity against bacteria implicated in peri-implantitis which could be explained by a detailed understanding of their physicochemical properties

    Storage Stability of an Antioxidant Active Packaging Coated with Citrus Extract Following a Plasma Jet Pretreatment

    Get PDF
    yesAntioxidant active packaging was prepared by coating a citrus extract on the surface of polyethylene terephthalate (PET) trays which had been either treated with an atmospheric pressure plasma jet or left untreated. The surface characteristics of the packaging were examined, as were its stability and antioxidant efficacy following storage for up to 24 weeks under the following three storage conditions: room temperature, 0 % relative humidity (RH) or 50 °C. Plasma pretreatment increased coating density, thickness and roughness, and oxygenated functional groups at the polymer surface, whereas water contact angle decreased. Trays stored at room temperature did not lose their antioxidant efficacy over 24 weeks and plasma pretreatment enhanced the efficacy from week 8 onwards. Gravimetric analysis of the coating revealed a loss of antioxidant compounds only after 16 weeks. Trays stored at 0 % RH lost coating from week 1 onwards, with lower loss in plasma pretreated trays, while loss of coating was highest at 50 °C, with lower loss in plasma pretreated trays only after 24 weeks. Overall, the surface characteristics of the antioxidant active packaging were modified by plasma pretreatment of the PET surface, with some improvement in antioxidant efficacy, and the efficacy of the packaging in delaying oxidative deterioration in cooked meats was retained during storage at ambient temperature

    Zirconium-based MOFs and their biodegradable polymer composites for controlled and sustainable delivery of herbicides

    Get PDF
    YesAdsorption and controlled release of agrochemicals has been studied widely using different nanomaterials and a variety of formulations. However, the potential for application of high surface-area metal-organic frameworks (MOFs) for the controlled release of agrochemicals has not been thoroughly explored. Herein, we report controlled and sustainable release of a widely used herbicide (2-methyl-4-chlorophenoxyacetic acid, MCPA) via incorporation in a range of zirconium-based MOFs and their biodegradable polymer composites. Three Zr-based MOFs, viz., UiO-66, UiO-66-NH2, and UiO-67 were loaded with MCPA either postsynthetically or in situ during synthesis of the MOFs. The MCPA-loaded MOFs were then incorporated into a biodegradable polycaprolactone (PCL) composite membrane. All three MOFs and their PCL composites were thoroughly characterized using FT-IR, TGA, SEM, PXRD, BET, and mass spectrometry. Release of MCPA from each of these MOFs and their PCL composites was then studied in both distilled water and in ethanol for up to 72 h using HPLC. The best performance for MCPA release was observed for the postsynthetically loaded MOFs, with PS-MCPA@UiO-66-NH2 showing the highest MCPA concentrations in ethanol and water of 0.056 and 0.037 mg/mL, respectively. Enhanced release of MCPA was observed in distilled water when the MOFs were incorporated in PCL. The concentrations of herbicides in the release studies provide us with a range of inhibitory concentrations that can be utilized depending on the crop, making this class of composite materials a promising new route for future agricultural applications.L.A.M.M. and S.N. acknowledge funding for a studentship by the Erasmus+ KA107 Student Mobility programme. V.P.T and L.R.T. acknowledge funding from the EPSRC (EP/R01650X/1

    Factors affecting Removal of Bacterial Pathogens from Healthcare Surfaces during Dynamic Wiping

    Get PDF
    Wiping of surfaces contaminated with pathogenic bacteria is a key strategy for combatting transmission of healthcare associated infections. It is essential to understand the extent to which removal of bacteria is modulated by fibre properties, biocidal liquid impregnation and applied hand pressure. The influence of intrinsic and extrinsic factors on the removal efficiencies of pathogenic bacteria was studied. Nonwoven wipes made of either hydrophobic (polypropylene) or hygroscopic (lyocell) fibres were manufactured and dynamic removal efficiency of bacteria studied. The single most important parameter affecting bacterial removal efficiency was impregnation with biocidal liquid (p <0.05). For inherently hygroscopic 100% regenerated cellulose (lyocell) wipes impregnated with biocidal liquid, removal of E. coli, S. aureus and E. faecalis improved by increasing the fabric surface density and wiping pressure to their maximal values - 150 g.m-2 and 13.80 kN.m-2 respectively. For inherently hydrophobic 100% polypropylene nonwoven wipes, the same conditions maximised the removal efficiency of S. aureus, but for E. coli and E. faecalis a reduction in the wiping pressure to 4.68 kN.m-2 was required. Best practice involves the use of higher surface density wipes (150 g m-2) containing regenerated cellulose fibres loaded with liquid biocide, and applied with the greatest possible wiping pressure

    Antibiotic functionalised polymers reduce bacterial biofilm and bioburden in a simulated infection of the cornea

    Get PDF
    Microbial keratitis can arise from penetrating injuries to the cornea. Corneal trauma promotes bacterial attachment and biofilm growth, which decrease the effectiveness of antimicrobials against microbial keratitis. Improved therapeutic efficacy can be achieved by reducing microbial burden prior to antimicrobial therapy. This paper assesses a highly-branched poly(N-isopropyl acrylamide) with vancomycin end groups (HB-PNIPAM-van), for reducing bacterial attachment and biofilm formation. The polymer lacked antimicrobial activity against Staphylococcus aureus, but significantly inhibited biofilm formation (p = 0.0008) on plastic. Furthermore, pre-incubation of S. aureus cells with HB-PNIPAM-van reduced cell attachment by 50% and application of HB-PNIPAM-van to infected ex vivo rabbit corneas caused a 1-log reduction in bacterial recovery, compared to controls (p = 0.002). In conclusion, HB-PNIPAM-van may be a useful adjunct to antimicrobial therapy in the treatment of corneal infections
    • …
    corecore