Nanodiamond preparation and surface characterization for biological applications

Nanodiamonds contain stable fluorescent emitters and hence can be used for molecular fluorescence imaging and precision sensing of electromagnetic fields. The physical properties of these emitters together with their low reported cytotoxicity make them attractive for biological imaging applications. The controlled application of nanodiamonds for cellular imaging requires detailed understanding of surface chemistry, size ranges and aggregation, as these can all influence cellular interactions. We compared these characteristics for graphitic and oxidized nanodiamonds. Oxidation is generally used for surface functionalization, and was optimized by Thermogravimetric Analysis, achieved by 445±5°C heating in air for 5 hours, then confirmed via Raman and Infrared spectroscopies. Size ranges and aggregation were assessed using Atomic Force Microscopy and Dynamic Light Scattering. Biocompatibility in breast cancer cell lines was measured using a proliferation assay. Heating at 445±5°C reduced the Raman signal of graphitic carbon (1575 cm-1) as compared to that of diamond (1332 cm-1) from 0.31±0.07 Raman intensity units to 0.07±0.04. This temperature was substantially below the onset of major mass loss (observed at 535±1°C) and therefore achieved cost efficiency, convenience and high yield. Graphitic and oxidized nanodiamonds formed aggregates in water, with a mean particle size of 192±4nm and 166±2nm at a concentration of 66μg/mL. We then applied the graphitic and oxidized nanodiamonds to cells in culture at 1μg/mL and found no significant change in the proliferation rate (-5±2% and -1±3% respectively). Nanodiamonds may therefore be suitable for development as a novel transformative tool in the life sciences

Large-scale quantum-emitter arrays in atomically thin semiconductors

This is the final version. Available on open access from Nature Research via the DOI in this recordData availability: The data that supports the findings of this study are available from the corresponding author upon request.Quantum light emitters have been observed in atomically thin layers of transition metal dichalcogenides. However, they are found at random locations within the host material and usually in low densities, hindering experiments aiming to investigate this new class of emitters. Here, we create deterministic arrays of hundreds of quantum emitters in tungsten diselenide and tungsten disulphide monolayers, emitting across a range of wavelengths in the visible spectrum (610–680 nm and 740–820 nm), with a greater spectral stability than their randomly occurring counterparts. This is achieved by depositing monolayers onto silica substrates nanopatterned with arrays of 150-nm-diameter pillars ranging from 60 to 190 nm in height. The nanopillars create localized deformations in the material resulting in the quantum confinement of excitons. Our method may enable the placement of emitters in photonic structures such as optical waveguides in a scalable way, where precise and accurate positioning is paramount.European CommissionEuropean Research Council (ERC)Engineering and Physical Sciences Research Council (EPSRC)National Science Foundation (NSF

Atomically thin quantum light-emitting diodes

This is the final version. Available on open access from Nature Research via the DOI in this recordData availability: The data that support the findings of this study are available from the corresponding authors upon request.Transition metal dichalcogenides are optically active, layered materials promising for fast optoelectronics and on-chip photonics. We demonstrate electrically driven single-photon emission from localized sites in tungsten diselenide and tungsten disulphide. To achieve this, we fabricate a light-emitting diode structure comprising single-layer graphene, thin hexagonal boron nitride and transition metal dichalcogenide mono- and bi-layers. Photon correlation measurements are used to confirm the single-photon nature of the spectrally sharp emission. These results present the transition metal dichalcogenide family as a platform for hybrid, broadband, atomically precise quantum photonics devices.European UnionEuropean Research Council (ERC)Engineering and Physical Sciences Research Council (EPSRC

Charge-tuneable biexciton complexes in monolayer WSe2

Monolayer transition metal dichalcogenides have strong Coulomb-mediated many-body interactions. Theoretical studies have predicted the existence of numerous multi-particle excitonic states. Two-particle excitons and three-particle trions have been identified by their optical signatures. However, more complex states such as biexcitons have been elusive due to limited spectral quality of the optical emission. Here, we report direct evidence of two biexciton complexes in monolayer tungsten diselenide: the four-particle neutral biexciton and the five-particle negatively charged biexciton. We distinguish these states by power-dependent photoluminescence and demonstrate full electrical switching between them. We determine the band states of the elementary particles comprising the biexcitons through magneto-optical spectroscopy. We also resolve a splitting of 2.5 meV for the neutral biexciton, which we attribute to the fine structure, providing reference for subsequent studies. Our results unveil the nature of multi-exciton complexes in transitionmetal dichalcogenides and offer direct routes towards deterministic control in many-body quantum phenomena

Laser Cooling of Optically Trapped Molecules

Calcium monofluoride (CaF) molecules are loaded into an optical dipole trap (ODT) and subsequently laser cooled within the trap. Starting with magneto-optical trapping, we sub-Doppler cool CaF and then load $150(30)$ CaF molecules into an ODT. Enhanced loading by a factor of five is obtained when sub-Doppler cooling light and trapping light are on simultaneously. For trapped molecules, we directly observe efficient sub-Doppler cooling to a temperature of $60(5)$ $\mu\text{K}$. The trapped molecular density of $8(2)\times10^7$ cm$^{-3}$ is an order of magnitude greater than in the initial sub-Doppler cooled sample. The trap lifetime of 750(40) ms is dominated by background gas collisions.Comment: 5 pages, 5 figure

Eco-intelligent factories: Timescales for environmental decision support

Manufacturing decisions are currently made based on considerations of cost, time and quality. However there is increasing pressure to also routinely incorporate environmental considerations into the decision making processes. Despite the existence of a number of tools for environmental analysis of manu-facturing activities, there does not appear to be a structured approach for gener-ating relevant environmental information that can be fed into manufacturing decision making. This research proposes an overarching structure that leads to three approaches, pertaining to different timescales that enable the generation of environmental information, suitable for consideration during decision making. The approaches are demonstrated through three industrial case studies

Intrinsic activity in the fly brain gates visual information during behavioral choices

The small insect brain is often described as an input/output system that executes reflex-like behaviors. It can also initiate neural activity and behaviors intrinsically, seen as spontaneous behaviors, different arousal states and sleep. However, less is known about how intrinsic activity in neural circuits affects sensory information processing in the insect brain and variability in behavior. Here, by simultaneously monitoring Drosophila's behavioral choices and brain activity in a flight simulator system, we identify intrinsic activity that is associated with the act of selecting between visual stimuli. We recorded neural output (multiunit action potentials and local field potentials) in the left and right optic lobes of a tethered flying Drosophila, while its attempts to follow visual motion (yaw torque) were measured by a torque meter. We show that when facing competing motion stimuli on its left and right, Drosophila typically generate large torque responses that flip from side to side. The delayed onset (0.1-1 s) and spontaneous switch-like dynamics of these responses, and the fact that the flies sometimes oppose the stimuli by flying straight, make this behavior different from the classic steering reflexes. Drosophila, thus, seem to choose one stimulus at a time and attempt to rotate toward its direction. With this behavior, the neural output of the optic lobes alternates; being augmented on the side chosen for body rotation and suppressed on the opposite side, even though the visual input to the fly eyes stays the same. Thus, the flow of information from the fly eyes is gated intrinsically. Such modulation can be noise-induced or intentional; with one possibility being that the fly brain highlights chosen information while ignoring the irrelevant, similar to what we know to occur in higher animals

Development and Validation of a Composite Programmatic Assessment Tool for HIV Therapy

Background We developed and validated a new and simple metric, the Programmatic Compliance Score (PCS), based on the IAS-USA antiretroviral therapy management guidelines for HIV-infected adults, as a predictor of all-cause mortality, at a program-wide level. We hypothesized that non-compliance would be associated with the highest probability of mortality. Methods and Findings 3543 antiretroviral-naive HIV-infected patients aged ≥19 years who initiated antiretroviral therapy between January 1, 2000 and August 31, 2009 in British Columbia (BC), Canada, were followed until August 31, 2010. The PCS is composed by six non-performance indicators based on the IAS-USA guidelines: (1) having <3 CD4 count tests in the first year after starting antiretroviral therapy; (2) having <3 plasma viral load tests in the first year after starting antiretroviral therapy; (3) not having drug resistance testing done prior to starting antiretroviral therapy; (4) starting on a non-recommended antiretroviral therapy regimen; (5) starting therapy with CD4 <200 cells/mm3; and (6) not achieving viral suppression within 6 months since antiretroviral therapy initiation. The sum of these six indicators was used to develop the PCS score - higher score indicates poorer performance. The main outcome was all-cause mortality. Each PCS component was independently associated with mortality. In the mortality analysis, the odds ratio (OR) for PCS ≥4 versus 0 was 22.37 (95% CI 10.46–47.84). Conclusions PCS was strongly associated with all-cause mortality. These results lend independent validation to the IAS-USA treatment guidelines for HIV-infected adults. Further efforts are warranted to enhance the PCS as a means to further improve clinical outcomes. These should be specifically evaluated and targeted at healthcare providers and patients