3,300 research outputs found
Optimization of shallow arches against instability using sensitivity derivatives
The author discusses the problem of optimization of shallow frame structures which involve a coupling of axial and bending responses. A shallow arch of a given shape and of given weight is optimized such that its limit point load is maximized. The cross-sectional area, A(x) and the moment of inertia, I(x) of the arch obey the relationship I(x) = rho A(x) sup n, n = 1,2,3 and rho is a specified constant. Analysis of the arch for its limit point calculation involves a geometric nonlinear analysis which is performed using a corotational formulation. The optimization is carried out using a second-order projected Lagrangian algorithm and the sensitivity derivatives of the critical load parameter with respect to the areas of the finite elements of the arch are calculated using implicit differentation. Results are presented for an arch of a specified rise to span ratio under two different loadings and the limitations of the approach for the intermediate rise arches are addressed
Optimum vibrating beams with stress and deflection constraints
The fundamental frequency of vibration of an Euler-Bernoulli or a Timoshenko beam of a specified constant volume is maximized subject to the constraint that under a prescribed loading the maximum stress or maximum deflection at any point along the beam axis will not exceed a specified value. In contrast with the inequality constraint which controls the minimum cross-section, the present inequality constraints lead to more meaningful designs. The inequality constraint on stresses is as easily implemented as the minimum cross-section constraint but the inequality constraint on deflection uses a treatment which is an extension of the matrix partitioning technique of prescribing displacements in finite element analysis
On the calculation of derivatives of eigenvalues and eigenvectors in the simultaneous design and control of structures
Independent Modal Space Control (IMSC) is a technique that is often used for the control of large order structural systems. The pertinent optimization problem in the simultaneous design and control of structures is a min - min problem that minimizes with respect to the structural design variables, the minimum value of the performance index with respect to the control forces obtained using the IMSC technique. The minimization process requires derivatives of eigenvalues and eigenvectors with respect to the design variables. These derivatives can be computed by a rather involved analytical procedure or a relatively simple finite difference procedure. The computer cost effectiveness of these two procedures for the derivative calculations is examined
Some inconsistencies of the finite element method as applied to inelastic response
The inadequacy of a two noded beam-column element with a linear axial and a cubic transverse displacement field for inelastic analysis is demonstrated. For complete equilibrium satisfaction in the linear elastic range a three noded beam-column element is shown to be consistent. Next, the sensitivity of the inelastic response to numerical solutions of the inelastic response of a cantilever beam resulting from approximate integration of strain energy are brought out and finally, consequences of this on the nonlinear transient response of structures are considered
SAPNEW: Parallel finite element code for thin shell structures on the Alliant FX/80
The results of a research activity aimed at providing a finite element capability for analyzing turbo-machinery bladed-disk assemblies in a vector/parallel processing environment are summarized. Analysis of aircraft turbofan engines is very computationally intensive. The performance limit of modern day computers with a single processing unit was estimated at 3 billions of floating point operations per second (3 gigaflops). In view of this limit of a sequential unit, performance rates higher than 3 gigaflops can be achieved only through vectorization and/or parallelization as on Alliant FX/80. Accordingly, the efforts of this critically needed research were geared towards developing and evaluating parallel finite element methods for static and vibration analysis. A special purpose code, named with the acronym SAPNEW, performs static and eigen analysis of multi-degree-of-freedom blade models built-up from flat thin shell elements
Nonlinear transient analysis via energy minimization
The formulation basis for nonlinear transient analysis of finite element models of structures using energy minimization is provided. Geometric and material nonlinearities are included. The development is restricted to simple one and two dimensional finite elements which are regarded as being the basic elements for modeling full aircraft-like structures under crash conditions. The results indicate the effectiveness of the technique as a viable tool for this purpose
Efficiency of unconstrained minimization techniques in nonlinear analysis
Unconstrained minimization algorithms have been critically evaluated for their effectiveness in solving structural problems involving geometric and material nonlinearities. The algorithms have been categorized as being zeroth, first, or second order depending upon the highest derivative of the function required by the algorithm. The sensitivity of these algorithms to the accuracy of derivatives clearly suggests using analytically derived gradients instead of finite difference approximations. The use of analytic gradients results in better control of the number of minimizations required for convergence to the exact solution
Three dimensional inelastic finite element analysis of laminated composites
Formulations of the inelastic response of laminated composites to thermal and mechanical loading are used as the basis for development of the computer NALCOM (Nonlinear Analysis of Laminated Composites) computer program which uses a fully three dimensional isoparametric finite element with 24 nodes and 72 degrees of freedom. An incremental solution is performed with nonlinearities introduced as pseudoloads computed for initial strains. Equilibrium iteration may be performed at every step. Elastic and elastic-plastic response of boron/epoxy and graphite/epoxy graphite/epoxy and problems of curing 0/90 sub s Gr/Ep laminates with and without circular holes are analyzed. Mechanical loading of + or - 45sub s Gr/Ep laminates is modeled and symmetry conditions which exist in angle-ply laminates are discussed. Results are compared to experiments and other analytical models when possible. All models are seen to agree reasonably well with experimetnal results for off-axis tensile coupons. The laminate analyses show the three dimensional effects which are present near holes and free corners
Digital Image Processing for Camera Application in Mobile Devices Using Artificial Neural Networks
This paper utilizes artificial neural networks based image processing techniques for low capacity and resource constrained devices like mobile phones for camera applications. The system is trained to develop the operating matrix, called the function matrix, by using artificial neural network theory, from a sample input and output image matrix. This is done when the system is in idle mode. After having obtained the function matrix, it can be very conveniently operated upon any other input image matrix by simple multiplication to obtain the desired modification in the input image in real time. Computer simulation results are provided to prove the concept. Keywords: image processing, artificial neural networks, mobile devices, camera applicatio
- …