25 research outputs found
Suomalaisten korat-rotuisten kissojen lipidiprofiilin kartoitus
Valtimotauti on yksi lÀnsimaisten ihmisten merkittÀvimmistÀ kuolinsyistÀ. Tauti on etenevÀ krooninen ja tulehduksellinen rappeumasairaus, jossa kolesterolipitoisia partikkeleita kertyy plakiksi valtimon seinÀmÀÀn, valtimoiden lÀpimitta pienenee ja veren virtaus hankaloituu. Helsingin yliopiston elÀinlÀÀketieteellisessÀ tiedekunnassa ja Helsingin Eviran patologian yksikössÀ on vuonna 2015 todettu kahdella suomalaisella korat-rotuisella kissalla ruumiinavauksen yhteydessÀ valtimotauti. Kissoilla ei tiedetÀ esiintyvÀn spontaania eli itsestÀÀn syntyvÀÀ valtimotautia. Koska HelsingissÀ avatuilla valtimotautia sairastaneilla kissoilla ei kummallakaan ollut sairaudelle altistavia lÀÀkityksiÀ tai sairauksia ja ne olivat keskenÀÀn sisaruksia, on mahdollista, ettÀ kissoilla on jokin perinnöllinen alttius taudille.
TĂ€mĂ€n tutkimuksen tavoitteena oli selvittÀÀ, esiintyykö suomalaisilla korat-rotuisilla kissoilla viitteitĂ€ normaalista poikkeavasta rasva-aineenvaihdunnasta ja siten antaa pohja kissojen valtimotaudin aiheuttajan selvitystyölle. IhmisillĂ€ valtimotaudille altistaa muun muassa veren kohonnut âpahanâ LDL-kolesterolin pitoisuus sekĂ€ matala âhyvĂ€nâ HDL-kolesterolin pitoisuus. Koratien (n=49) plasmasta mÀÀritettiin kokonaiskolesterolin, kokonaistriglyseridien, LDLkolesterolin ja HDL-kolesterolin pitoisuudet ja verrattiin niitĂ€ terveiden muun rotuisten verrokkikissojen (n=13) plasman pitoisuuksiin.
Korateilla todettiin merkitsevÀsti korkeammat plasman kokonaiskolesterolipitoisuudet (ka 4,45 ± 1,05 vs. 3,42 ± 0,93 mmol/l, p = 0, 0012) ja HDL-pitoisuudet (ka 3,12 ± 0,60 vs. 2,39 ± 0,74 mmol/l, p = 0,0003) kuin kontrollikissoilla. LDL-pitoisuuksissa ei todettu merkitsevÀÀ eroa. Tulosten perusteella korkea LDL-pitoisuus tuskin on ollut korateilla valtimotaudille altistanut tekijÀ. Sen sijaan koratien HDL-pitoisuudet olivat poikkeavan korkeita ja koska ne erosivat merkitsevÀsti terveistÀ kontrollikissoista, voisikin olla, ettÀ HDL ei ole nÀillÀ kissoilla taudilta suojaava tekijÀ. IhmisillÀ ja hiirillÀ HDL-partikkelien tiedetÀÀn voivan muuttua toimimattomiksi tietyissÀ olosuhteissa ja menettÀÀ siten valtimotaudilta suojaava vaikutuksensa. Kissojen mahdollisesti toimimattoman HDL:n toteaminen ja taustalla olevan syyn selvittÀminen vaatisi jatkotutkimuksia
Consolidation of processing fixtures to lifting arms
Företaget Cranab, i vindeln, tillverkar i stor utsrĂ€ckning skotar-, och skördarkranar till skogsmaskiner i varierande storlekar. Företaget tillverkar sedan ett Ă„r tillbaka Ă€ven lastbilkranar. En kran bestĂ„r av olika delar i varierande storlekar sĂ„ som kranpelare, lyftarmar, vipparmar, mellanbommar och innerbommar. Dessa krandelar Ă€r svetsade konstruktioner och bestĂ„r i sig av olika komponenter, de olika komponenterna skĂ€rs ut i en lasermaskin och svetsas sedan pĂ„ de olika krandelarna. NĂ€r krandelarna Ă€r kompletta bearbetas de i en CNC-maskin. NĂ€r den fĂ€rdiga krandel ska bearbetas i CNC-maskinen placeras den i en fixtur som sĂ€kerstĂ€ller en stabilare bearbetning och förhindrar frĂ€mst vibrationer. I nulĂ€get anvĂ€nds en uppsjö av olika fixturer som Ă€r konstruerade för en esnkild krandel, vilket medför en lĂ€ngre stĂ€lltid och fixturerna tar vĂ€ldigt stor plats pĂ„ golvet. Syftet med detta arbete Ă€r att ta fram ett konstruktionsförslag till en flexibel fixtur dĂ€r ett antal krandelar med varierande storlek gĂ„r att spĂ€nna fast. MĂ„nga faktorer Ă€r viktiga vid konstruering av fixturerna för att kunna sĂ€kerstĂ€lla en optimal bearbetning av krandelarna. Cranab stĂ„r inför en stor investering gĂ€llande CNC-maskin vilket pĂ„verkar fixturen dĂ„ den skall roteras 90 grader under bearbetningen, de nuvarande fixturerna Ă€r inte anpassade för denna rotation och dĂ€rför mĂ„ste Ă€ven detta tas till hĂ€nsyn under konstruktion utöver de tidigare kraven. Under detta arbete behandlades lyftarmar till skotare vilket Ă€r den mest komplicerade krandelen. Första momentet av arbetet bestĂ„r av informationsinsamling och analys av nuvarande fixturer, efter detta utförs konstruktionsarbetet i CAD-programmet Inventor dĂ€r ett koncept till fixturen tas fram. Resultatet av arbetet Ă€r en fixtur som kan hantera Ă„tta stycken olika varianter av lyftarmen till skotare, i nulĂ€get kan en fixtur endast anvĂ€ndas till maxiamalt tvĂ„ olika varianter. I och med den nya konstruktionen kan justeringarna som krĂ€vs för olika varianter göras pĂ„ ett smidigt sĂ€tt och inga traverser eller liknande verktyg krĂ€vs för att stĂ€lla om fixturen, vilket effektiviserar fixturen ytterligare. Resultatet ses som en klar förbĂ€ttring jĂ€mfört med de nuvarande fixturerna, Ă€ven om det som presenteras inte Ă€r en fĂ€rdigstĂ€lld genomarbetad fixtur sĂ„ Ă€r det en grund att arbeta vidare med.The company Cranab, located in Vindeln, manufactures cranes in varius sizes mostly to forest machines, since a year back they also manufactures cranes to trucks. A crane consists of different components in various sizes such as crane piller, lifting arms, rocker arms, middle boom and inner boom. These components are welded constructions and consists of different details, the different details are produced in a laser cutting process and then welded on to the arm itself. When the arm is complete it is put into a CNC-machine where it is processed. When the arm is ready for the CNC-machine it is placed in a fixture to ensure a more stable processing an mostly to readuce vibrations. The current situation at Cranab is that they use one specific fixture to one specific arm. For this reason it takes a lot of time to change between arms and the fixtures itself takes a lot of place in the workshop. The purpose of this project is to construct a flexible fixture that is able to handle a couple of arms by changing the fixture in a smooth way. A lot of varius factors are important when constructing a fixture that ensures a stable and safe process in the CNC-machine. Cranab are investing a lot of money in a new CNC-machine that will process these arms, the new machine is going to rotate the whole fixture 45 degreese. The fixture that are now used are not able to handle this kind of rotation so except the current requirements the new fixture must be able to hold the whole weight of the arm. During this project the lifting arm to forwarders will be analyzed which is the most complicated part of the crane. The first part of the project will consist of collecting information about the current situation and analyzing the fixtures that are now used, after that the construction of the fixture will be done in the CAD-program Inventor where a koncept will be be developed. The project results in a fixture that can handle eight arms, the current fixtures that are used can only handle a maximum of two arms. With the new fixture, the adjustmets that are necessary when different arms needs to be mounted will be easy to implement and they wonât need a traverse to adjust the fixture. This will make the workprocess of adjusting the fixture much more time efficient. The result is, in comparison with the old fixtures, a clear improvement. Although the project resulted in a raw model of the flexible fixture it is a clear improvement of the existing ones and it is something to continue working with
Consolidation of processing fixtures to lifting arms
Företaget Cranab, i vindeln, tillverkar i stor utsrĂ€ckning skotar-, och skördarkranar till skogsmaskiner i varierande storlekar. Företaget tillverkar sedan ett Ă„r tillbaka Ă€ven lastbilkranar. En kran bestĂ„r av olika delar i varierande storlekar sĂ„ som kranpelare, lyftarmar, vipparmar, mellanbommar och innerbommar. Dessa krandelar Ă€r svetsade konstruktioner och bestĂ„r i sig av olika komponenter, de olika komponenterna skĂ€rs ut i en lasermaskin och svetsas sedan pĂ„ de olika krandelarna. NĂ€r krandelarna Ă€r kompletta bearbetas de i en CNC-maskin. NĂ€r den fĂ€rdiga krandel ska bearbetas i CNC-maskinen placeras den i en fixtur som sĂ€kerstĂ€ller en stabilare bearbetning och förhindrar frĂ€mst vibrationer. I nulĂ€get anvĂ€nds en uppsjö av olika fixturer som Ă€r konstruerade för en esnkild krandel, vilket medför en lĂ€ngre stĂ€lltid och fixturerna tar vĂ€ldigt stor plats pĂ„ golvet. Syftet med detta arbete Ă€r att ta fram ett konstruktionsförslag till en flexibel fixtur dĂ€r ett antal krandelar med varierande storlek gĂ„r att spĂ€nna fast. MĂ„nga faktorer Ă€r viktiga vid konstruering av fixturerna för att kunna sĂ€kerstĂ€lla en optimal bearbetning av krandelarna. Cranab stĂ„r inför en stor investering gĂ€llande CNC-maskin vilket pĂ„verkar fixturen dĂ„ den skall roteras 90 grader under bearbetningen, de nuvarande fixturerna Ă€r inte anpassade för denna rotation och dĂ€rför mĂ„ste Ă€ven detta tas till hĂ€nsyn under konstruktion utöver de tidigare kraven. Under detta arbete behandlades lyftarmar till skotare vilket Ă€r den mest komplicerade krandelen. Första momentet av arbetet bestĂ„r av informationsinsamling och analys av nuvarande fixturer, efter detta utförs konstruktionsarbetet i CAD-programmet Inventor dĂ€r ett koncept till fixturen tas fram. Resultatet av arbetet Ă€r en fixtur som kan hantera Ă„tta stycken olika varianter av lyftarmen till skotare, i nulĂ€get kan en fixtur endast anvĂ€ndas till maxiamalt tvĂ„ olika varianter. I och med den nya konstruktionen kan justeringarna som krĂ€vs för olika varianter göras pĂ„ ett smidigt sĂ€tt och inga traverser eller liknande verktyg krĂ€vs för att stĂ€lla om fixturen, vilket effektiviserar fixturen ytterligare. Resultatet ses som en klar förbĂ€ttring jĂ€mfört med de nuvarande fixturerna, Ă€ven om det som presenteras inte Ă€r en fĂ€rdigstĂ€lld genomarbetad fixtur sĂ„ Ă€r det en grund att arbeta vidare med.The company Cranab, located in Vindeln, manufactures cranes in varius sizes mostly to forest machines, since a year back they also manufactures cranes to trucks. A crane consists of different components in various sizes such as crane piller, lifting arms, rocker arms, middle boom and inner boom. These components are welded constructions and consists of different details, the different details are produced in a laser cutting process and then welded on to the arm itself. When the arm is complete it is put into a CNC-machine where it is processed. When the arm is ready for the CNC-machine it is placed in a fixture to ensure a more stable processing an mostly to readuce vibrations. The current situation at Cranab is that they use one specific fixture to one specific arm. For this reason it takes a lot of time to change between arms and the fixtures itself takes a lot of place in the workshop. The purpose of this project is to construct a flexible fixture that is able to handle a couple of arms by changing the fixture in a smooth way. A lot of varius factors are important when constructing a fixture that ensures a stable and safe process in the CNC-machine. Cranab are investing a lot of money in a new CNC-machine that will process these arms, the new machine is going to rotate the whole fixture 45 degreese. The fixture that are now used are not able to handle this kind of rotation so except the current requirements the new fixture must be able to hold the whole weight of the arm. During this project the lifting arm to forwarders will be analyzed which is the most complicated part of the crane. The first part of the project will consist of collecting information about the current situation and analyzing the fixtures that are now used, after that the construction of the fixture will be done in the CAD-program Inventor where a koncept will be be developed. The project results in a fixture that can handle eight arms, the current fixtures that are used can only handle a maximum of two arms. With the new fixture, the adjustmets that are necessary when different arms needs to be mounted will be easy to implement and they wonât need a traverse to adjust the fixture. This will make the workprocess of adjusting the fixture much more time efficient. The result is, in comparison with the old fixtures, a clear improvement. Although the project resulted in a raw model of the flexible fixture it is a clear improvement of the existing ones and it is something to continue working with
KieltomÀÀrÀys verkkoalustaa vastaan yhtenÀispatentin oikeussuojakeinona 3D-tulostuskontekstissa
YhtenÀispatenttijÀrjestelmÀ on astumassa voimaan patenttioikeuden ollessa suuren haasteen edessÀ. 3D-tulostusteknologia, jonka johdosta patentoituja fyysisiÀ keksintöjÀ on mahdollista jakaa verkkoalustoilla digitaalisten CAD-tiedostojen muodossa, kehittyy ja yleistyy jatkuvasti. Tutkielmassa kartoitetaan yhtenÀispatentinhaltijan edellytyksiÀ hakea kieltomÀÀrÀystÀ CAD-tiedostoja vÀlittÀvÀÀ verkkoalustaa vastaan ja selvitetÀÀn, millÀ tavalla EU-oikeudessa omaksuttu yleisen valvontavelvollisuuden kielto voi vaikuttaa mahdollisuuteen velvoittaa kieltomÀÀrÀyksessÀ verkkoalustaa estÀmÀÀn myös uudet patentin loukkaukset. Tutkielmassa tunnistetaan kaksi keinoa kohdistaa kieltomÀÀrÀys verkkoalustaan: verkkoalustan oma patentinloukkaus ja kolmannen patentinloukkaus verkkoalustaa kÀyttÀen.
Tutkielmassa katsotaan, ettÀ verkkoalusta ei voi itse loukata patenttia vÀlittömÀsti jakaessaan keksintöÀ esittÀvÀÀ CAD-tiedostoa, joten tarkastelu rajoittuu alustan vÀlilliseen patentinloukkaukseen. KieltomÀÀrÀyksen hakemiseen alustan oman loukkauksen perusteella liittyy merkittÀviÀ epÀvarmuustekijöitÀ. Tutkielmassa puolletaan kantaa, jonka mukaan verkkoalustan oma vÀlillinen patentinloukkaus voisi sÀÀntelyn puitteissa olla mahdollinen, mutta sen osoittaminen olisi erittÀin haastavaa. SÀÀnnöstÀ, joka mahdollistaa kieltomÀÀrÀyksen hakemisen sellaista vÀlittÀjÀÀ vastaan, jonka palveluja kolmas kÀyttÀÀ patentinloukkauksessaan, ei ole tiettÀvÀsti vielÀ hyödynnetty patentin suojakeinona. TÀmÀ aiheuttaa oikeustilaan epÀvarmuutta. EU-oikeudessa on kuitenkin sÀÀnnöksen soveltamisessa omaksuttu varsin laaja tulkinta, mikÀ voi edesauttaa patentinhaltijan mahdollisuuksia saada kieltomÀÀrÀys verkkoalustaa vastaan ja siten estÀÀ patentoidun keksinnön leviÀminen verkossa.
Yleisen valvontavelvollisuuden kiellon osalta havaitaan unionin tuomioistuimen tulkintalinjassa tapahtuneen viime vuosina muutos. Muutoksen seurauksena voidaan perustellusti katsoa, ettÀ yleisen valvontavelvollisuuden kielto ei enÀÀ ole esteenÀ sille, ettÀ kieltomÀÀrÀyksiin sisÀllytetÀÀn velvoitteita estÀÀ jo poistettavaksi mÀÀrÀtyn tiedoston lataaminen alustalle uudelleen. TÀmÀ linjamuutos tehostaa kieltomÀÀrÀyksen patenttia suojaavaa vaikutusta ja voi lisÀtÀ kannattavuutta hakea kieltomÀÀrÀystÀ verkkoalustaa vastaan siitÀ huolimatta, ettÀ kieltomÀÀrÀyksen saamisen edellytykset ovat vielÀ oikeuskÀytÀnnön puuttuessa epÀvarmat. Kokoavasti todetaan, ettÀ yhtenÀispatenttijÀrjestelmÀn sÀÀntelykehys tarjoaa puitteet hakea kieltomÀÀrÀystÀ verkkoalustaa vastaan. JÀÀ kuitenkin yhdistetyn patenttituomioistuimen varmistettavaksi tulevassa oikeuskÀytÀnnössÀÀn, ettÀ nÀmÀ puitteet tarjoavat tosiasiallisen keinon oikeuksiin pÀÀsemiseksi
Export of municipal environmental technology knowledge : An analysis of previous activities and incentives
Accelerating urbanisation and greenhouse gas emissions cause some of the worldâs important environmental problems, which leads to an increasing awareness of the importance of sustainable environmental technology systems. Sweden has had a very strict environmental legislation since the 1970âs, with Swedish municipalities responsible for local environmental technology service systems. This has led municipal companies to be very experienced of some of the functions related to waste management, waste-to-energy and district heating. Municipal companies often receive international visits where the foreign delegates sometimes request Swedish municipal knowledge regarding how to design and manage sustainable systems in their home regions. Therefore, the idea of municipal knowledge export has been up for discussion. This study aims to analyse the municipal companiesâ previous experiences of knowledge export, which includes looking at what incentives and barriers they perceive therein. The work also investigates what knowledge municipal companies export and what approaches they choose, as well as what role they and other actors think municipal companies should have in order to best benefit Swedish environmental technology export. The project was designed as a qualitative interview study, where the main data collection was carried out in semi-structured interviews with decision-makers in municipal energy and waste companies. Interesting companies were found using desktop research. Data collection was complemented by a survey where municipal companies were asked about their involvement in knowledge export. The results show that municipal companies export knowledge such as consulting and advisory services, education and project management. They offer knowledge for example within managing waste systems, operating district heating plants, as well as public awareness and citizen participation. Some companies have started subsidiaries dedicated specifically to export ventures, while others offer personnel as sub-consultants to private companies. Most export took place as projects run by the municipal companies themselves, often financed by development aid funds. The most important incentives motivating municipal companies to start or continue their export endeavours include motivating employees, becoming an attractive employer, contributing to reducing environmental impact where it is most needed, and external initiatives or requests. The most prominent barriers were related to lack of resources, cultural and political differences, and challenges related to marketing. The municipal companies and other actors in governmental and private organisations appear to have different perceptions of the significance of municipal knowledge and the role municipal companies should play, in order to best contribute to Swedenâs environmental technology export. In general, the interviewed municipal companies tend to seek a more active role in the export, whereas the other actors would prefer municipal companies to be more focused on promoting the export from their home region
Varför sprids inte EVA bland svenska företag : en studie ur företags- och konsultperspektiv
Validerat; 20101217 (root
Transversal skills in 7th grade mathematics tasks
Darba autors: SarmÄ«te SagaloviÄa. Darba tÄma: Caurviju prasmes 7. klases matemÄtikas uzdevumos. Darba veids: Bakalaura darbs. Studiju programma: DabaszinÄtĆu un informÄcijas tehnoloÄŁijas skolotÄjs. Darba zinÄtniskais vadÄ«tÄjs: Baiba ÄboltiĆa Bakalaura darbÄ tiek pÄtÄ«tas un analizÄtas caurviju prasmes 7. klases matemÄtikas uzdevumos. Darba mÄrÄ·is ir apskatÄ«t un analizÄt matemÄtikas uzdevumus ar caurviju prasmÄm. Darba uzdevumi ir apskatÄ«t un izpÄtÄ«t caurviju prasmju skaidrojumu un nepiecieĆĄamÄ«bu. IzpÄtÄ«t caurviju prasmes esamÄ«bu un veidu, kÄ tÄs izpauĆŸas matemÄtikÄ. IzvÄlÄties un analizÄt caurviju prasmes 7. â 12. klaĆĄu matemÄtikas uzdevumos. IzpÄtÄ«t RÄ«gas ZolitĆ«des ÄŁimnÄzijas 7. klaĆĄu skolÄnu prasmes un attieksmi pret tÄm, atrisinot matemÄtikas uzdevumus ar katru no caurviju prasmÄm. AptaujÄt daĆŸÄdu priekĆĄmetu skolotÄjus un RÄ«gas ZolitĆ«des ÄŁimnÄzijas 7.a, 7.d, 7.e klases skolÄnus. Veikt darba analÄ«zi, izdarÄ«t secinÄjumus un priekĆĄlikumus. Darbs sastÄv no 3 nodaÄŒÄm. TÄ pirmajÄ nodaÄŒÄ tiek noskaidrots, kas ir caurviju prasmes, kÄda ir caurviju prasmju nepiecieĆĄamÄ«ba, kÄ arÄ« tiek raksturotas caurviju prasmes. OtrajÄ nodaÄŒÄ tiek noskaidrots un apskatÄ«ts kÄdÄ veidÄ caurviju prasmes tiek attÄlotas matemÄtikas uzdevumos. ApskatÄ«ti no 7. lÄ«dz 12. klases matemÄtikas uzdevumi katrÄ caurviju pramsÄ. TreĆĄajÄ nodaÄŒÄ tiek apskatÄ«ti 7. klases matemÄtikas uzdevumi katrÄ caurviju prasmÄ visos 7. klases mÄcÄ«bu gada tematos. RezultÄtÄ iegĆ«ts skolotÄju un RÄ«gas ZolitĆ«des ÄŁimnÄzijas 7. klaĆĄu aptaujas rezultÄtu apkopojums, un 7. klases mtemÄtikas uzdevumu analÄ«ze par katru caurviju prasmi visos 7. klases mÄcÄ«bu gada tematos. Darbs kopumÄ izklÄstÄ«ts 54 lappusÄs, tajÄ iekÄŒautas 6 tabulas un 27 attÄli. DarbÄ izmantoti 18 literatĆ«ras avoti un pievienoti 2 pielikumi. AtslÄgas vÄrdi: caurviju prasmes, matemÄtika, uzdevumi.Author of the work: Sarmite Sagalovica. Subject of work: Transversal skills in 7th grade mathematics tasks. Type of work: Bachelor's work. Study programme: Master of Science and Information Technology. Scientific Head of Work: Baiba Aboltina The work of the bachelor shall study and analyse rolling skills in grade 7 math tasks. The aim of the job is to look at and analyze math tasks with rolling skills. The job challenges are to look at and explore the clarification and necessity of rolling skills. Explore the existence of a rolling skill and the way they are expressed in math. Select and analyse rolling skills for classes 7-12 math tasks. To study the skills and attitudes of students of classes 7 of Riga Zolitude Gymnasium by resolving math tasks with each of the fluent skills. Survey teachers of various subjects and students of classes 7a, 7d, 7e of Riga Zolitude Gymnasium. Carry out work analysis, draw conclusions and proposals. The work consists of 3 chapters. In its first chapter, it is clear what the skills are, what is needed for rolling skills, and what is described as the skills of rolling. In the second chapter, it is clarified and examined the way through which the skills are represented in math tasks. Classes 7 to 12 math tasks are addressed in each rolling pram. The third chapter deals with the tasks of grade 7 mathematics in each rolling skill in all subjects of class 7. The result is a summary of the results of the 7 th class survey of teachers and Riga Zolitude Gymnasium, and an analysis of the tasks of the classroom 7 for each rolling skill in all subjects of Class 7. A total of 54 pages of work, including 6 tables and 27 images. The work uses 18 literature sources and adds 2 annexes. Key words: Transversal skills, math, tasks
EriyttÀmisen vaikutus oppilaiden liikuntamotivaatioon
Kandidaatintutkielmamme on kirjallisuuskatsaus, joka kÀsittelee eriyttÀmisen ja motivaation merkitystÀ liikunnanopetuksessa. TÀmÀn lisÀksi tutkimme eriyttÀmisen ja motivaation vÀlistÀ suhdetta toisiinsa. LÀhdemme tutkielmassamme liikkeelle liikunnanopetuksen mÀÀrittelemisestÀ, jonka jÀlkeen selvitÀmme mitÀ on eriyttÀminen ja kuinka sitÀ toteutetaan liikunnanopetuksessa. KÀymme myös lÀpi eri motivaatioteorioiden avulla miten motivaatio syntyy ja miten opettaja voi vaikuttaa oppilaidensa liikuntamotivaatioon. Lopuksi perehdymme siihen, kuinka eriyttÀminen vaikuttaa oppilaiden liikuntamotivaatioon.
Aiheemme on todella ajankohtainen, sillÀ nykypÀivÀnÀ oppilasryhmÀt ovat yhÀ heterogeenisempiÀ oppilaiden liikunnallisten taitojen vaihdellessa suuresti, minkÀ vuoksi eriyttÀminen nousee todella tÀrkeÀksi elementiksi liikuntatunneilla. Opettajan on osattava tarjota sopivan haastavia tehtÀviÀ jokaiselle oppilaalle yksilöllisesti, ja tÀtÀ painotetaan myös Perusopetuksen opetussuunnitelman perusteissa 2014. LisÀksi opettajan on tÀrkeÀÀ olla tietoinen soveltavan liikunnan mahdollisuuksista, mikÀ tarkoittaa oppilaiden erityistarpeiden ja vammojen huomioimista. Liikunnanopetuksen tarkoituksena on ottaa jokainen ryhmÀn jÀsen huomioon parhaalla mahdollisella tavalla.
Oppilaiden yksilöllisyys tulee ilmi myös oppilaiden motivaatiossa, sillÀ toisten oppilaiden liikuntamotivaatio on paljon suurempi kuin toisten. Opettajalla on mahdollisuus vaikuttaa oppilaiden motivaation kasvuun pitÀmÀllÀ huoli, ettÀ tunneilla tarjotaan kaikille autonomian tunnetta, pÀtevyyden kokemuksia sekÀ sosiaalisen yhteenkuuluvuuden tunnetta. Opettajan rooli myönteisen motivaatioilmaston luomisessa on suuri. Opettajan on hyvÀ pyrkiÀ luomaan liikuntatunneille enemmin tehtÀvÀsuuntautunut motivaatioilmasto, jossa vertailu perustuu itsevertailuun, kuin minÀsuuntautunut motivaatioilmasto, jossa oppilaat vertailevat suorituksia toisiinsa. Korostamalla tehtÀvÀsuuntautuneisuutta tehdessÀÀn pedagogisia ratkaisuja opettaja voi vaikuttaa oppilaiden motivaatioon eriyttÀmisen kautta