331 research outputs found
The impact of conventional and organic farming on soil biodiversity conservation: a case study on termites in the long-term farming systems comparison trials in Kenya
A long-term experiment at two trial sites in Kenya has been on-going since 2007 to assess the effect of organic and conventional farming systems on productivity, profitability and sustainability. During these trials the presence of significant numbers of termites (Isoptera) was observed. Termites are major soil macrofauna and within literature they are either depict as âpestsâ or as important indicator for environmental sustainability. The extent by which termites may be managed to avoid crop damage, but improve sustainability of farming systems is worthwhile to understand. Therefore, a study on termites was added to the long-term experiments in Kenya. The objectives of the study were to quantify the effect of organic (Org) and conventional (Conv) farming systems at two input levels (low and high) on the abundance, incidence, diversity and foraging activities of termites.
The results showed higher termite abundance, incidence, activity and diversity in Org-High compared to Conv-High, Conv-Low and Org-Low. However, the termite presence in each system was also dependent on soil depth, trial site and cropping season. During the experiment, nine different termite genera were identified, that belong to three subfamilies: (i) Macrotermitinae (genera: Allodontotermes, Ancistrotermes, Macrotermes, Microtermes, Odontotermes and Pseudocanthotermes), (ii) Termitinae (Amitermes and Cubitermes) and (iii) Nasutitiermitinae (Trinervitermes).
We hypothesize that the presence of termites within the different farming systems might be influenced by the types of input applied, the soil moisture content and the occurrence of natural enemies. Our findings further demonstrate that the organic high input system attracts termites, which are an important, and often beneficial, component of soil fauna. This further increases the potential of such systems in enhancing sustainable agricultural production in Kenya
Random distributions of initial porosity trigger regular necking patterns at high strain rates
At high strain rates, the fragmentation of expanding structures of ductile materials, in general, starts by the localization of plastic deformation in multiple necks. Two distinct mechanisms have been proposed to explain multiple necking and fragmentation process in ductile materials. One view is that the necking pattern is related to the distribution of material properties and defects. The second view is that it is due to the activation of specific instability modes of the structure. Following this, we investigate the emergence of necking patterns in porous ductile bars subjected to dynamic stretching at strain rates varying from 10[superscript 3]âs[superscript â1] to 0.5Ă10[superscript 5]s[superscript â1] using finite-element calculations and linear stability analysis. In the calculations, the initial porosity (representative of the material defects) varies randomly along the bar. The computations revealed that, while the random distribution of initial porosity triggers the necking pattern, it barely affects the average neck spacing, especially, at higher strain rates. The average neck spacings obtained from the calculations are in close agreement with the predictions of the linear stability analysis. Our results also reveal that the necking pattern does not begin when the ConsidĂšre condition is reached but is significantly delayed due to the stabilizing effect of inertia.K.E.N., S.O. and J.A.R.-M. acknowledge the support from the European Unionâs Horizon2020 Programme (Excellent Science, Marie-Sklodowska-Curie Actions) under REA grant agreement no. 675602 (Project OUTCOME). J.A.R.-M. is also thankful to the Ministerio de EconomĂa y Competitividad de España (Project no. EUIN2015-62556) for the financial support that partly supported this work
Dynamics of necking and fracture in ductile porous materials
The onset of necking in dynamically expanding ductile rings is delayed due to the stabilizing effect of inertia, and with increasing expansion velocity, both the number of necks incepted and the number of fragments increase. In general, neck retardation is expected to delay fragmentation as necking is often the precursor to fracture. However, in porous ductile materials, it is possible that fracture can occur without significant necking. Thus, the objective of this work is to unravel the complex interaction of initial porosity and inertia on the onset of necking and fracture. To this end, we have carried out a series of finite element calculations of unit cells with sinusoidal geometric perturbations and varying levels of initial porosity under a wide range of dynamic loading conditions. In the calculations, the material is modeled using a constitutive framework that includes many of the hardening and softening mechanisms that are characteristics of ductile metallic materials, such as strain hardening, strain rate hardening, thermal softening, and damage-induced softening. The contribution of the inertia effect on the loading process is evaluated through a dimensionless parameter that combines the effects of loading rate, material properties, and unit cell size. Our results show that low initial porosity levels favor necking before fracture, and high initial porosity levels favor fracture before necking, especially at high loading rates where inertia effects delay the onset of necking. The finite element results are also compared with the predictions of linear stability analysis of necking instabilities in porous ductile materials.J.A.R.-M. acknowledges the financial support provided by the European Research Council under the European Union's Horizon 2020 research and innovation programme (Project PURPOSE, Grant agreement 758056)
The effect of initial texture on multiple necking formation in polycrystalline thin rings subjected to dynamic expansion
In this paper, we have investigated, using finite element calculations, the effect of initial texture on the formation of multiple necking patterns in ductile metallic rings subjected to rapid radial expansion. The mechanical behavior of the material has been modeled with the elasto-viscoplastic single crystal constitutive model developed by Marin (2006). The polycrystalline microstructure of the ring has been generated using random Voronoi seeds. Both 5000 grain and 15000 grain aggregates have been investigated, and for each polycrystalline aggregate three different spatial distributions of grains have been considered. The calculations have been performed within a wide range of strain rates varying from
to
, and the rings have been modeled with four different initial textures: isotropic texture,
Goss texture,
R Goss texture and
Z fiber texture. The finite element results show that: (i) the spatial distribution of grains affects the location of the necks, (ii) the decrease of the grain size delays the formation of the necking pattern and increases the number of necks, (iii) the initial texture affects the number of necks, the location of the necks, and the necking time, (iv) the development of the necks is accompanied by a local increase of the slip activity. This work provides new insights into the effect of crystallographic microstructure on dynamic plastic localization and guidelines to tailor the initial texture in order to delay dynamic necking formation and, thus, to improve the energy absorption capacity of ductile metallic materials at high strain rates.This work has received funding from the European Union's Horizon 2020 Programme (Excellent Science, Marie-SkĆodowska-Curie Actions) under REA grant agreement 777896 (Project QUANTIFY). The support of National Science Centre, Poland , through the project 2021/41/B/ST8/03345 is acknowledged.Publicad
Recommended from our members
Temperature-based phenology model to predict the development, survival, and reproduction of the oriental fruit fly Bactrocera dorsalis
The oriental fruit fly Bactrocera dorsalis (Diptera: Tephritidae) is a major pest of fruit and vegetable production systems on several continents. The pest has invaded many countries, causing considerable impact on fruit production systems and commercialization. In this study we determined the relationship between temperature and development, survival and reproductive parameters of B. dorsalis on an artificial diet under laboratory conditions under 7 constant temperatures (10, 15, 20, 25, 30, 33 and 35 °C) with 70 ± 10% relative humidity and a photoperiod of L12:D12. We validated the laboratory results with a full life table analysis under semi-natural conditions in a screenhouse. We used the Insect Life Cycle Modeling (ILCYM) software for all mathematical models and simulations applied to all life history parameters. Bactrocera dorsalis completed its development at temperatures ranging between 15 and 33 °C with the mean developmental time of egg, larva, and pupa ranging between 1.46 and 4.31 days, 7.14-25.67 days, and 7.18-31.50 respectively. The models predicted temperatures ranging between 20 and 30 °C as favorable for development and survival, and 20 to 25 °C for optimal fecundity of B. dorsalis. Life table parameters showed the highest gross reproductive rate (GRR), net reproductive rate (Ro), intrinsic rate of increase (rm), and finite rate of increase (λ) between 25 and 31 á”C while generation time (T) and doubling time (Dt) were low at this interval. The effects of future climate change on B. dorsalis life history parameters were further investigated and the outcome from this study will help in the management of B. dorsalis in different agroecologies in the context of ongoing climate change
Recommended from our members
Reliability of Pheromone Trap Catches and Maize Plant Damage as Criteria for Timing Fall Armyworm Control Interventions in Humid Forest Agroecology of Central Africa
Control of fall armyworm (FAW) Spodoptera frugiperda (J.E. Smith) (Lepidoptera: Noctuidae) since its invasion of Africa still depends on pesticides. Early detection of adults is considered the key to the success of larvae control in the crop field. However, FAW control thresholds based on current monitoring techniques are not well established in Africa. We investigated the efficacy of moth capture frequencies and FAW incidence levels as decision tools for FAW management. Experiments were conducted over two maize cropping seasons during which FAW incidence, severity, and larvae count were recorded during destructive sampling after the application of a homologated insecticide. During the first season, the FAW incidence ranged from 37.5 ± 5.6% in the 25% incidence threshold treatment to 48.1 ± 8.1% in the control. During the second season, the incidence was significantly lower in the 25% incidence threshold treatment (55.8 ± 5.7%) compared with the control (75.7 ± 3.0%). Over the two seasons, no significant difference in FAW damage severity was recorded between the treatments and control. The highest number of larvae per plant (4.0 ± 0.6) was observed in the 10% incidence threshold treatment. Insecticide application did not consistently contribute to reducing FAW incidence and observed plant damage did not translate into yield loss. FAW control needs further investigation to establish a threshold above which damage translates into yield loss, thus necessitating control intervention
Insecticide contamination in organic agriculture: Evidence from a long-term farming systems comparison trial
Synthetic pesticides applied in conventional agriculture to control pests tend to compromise ecosystem services, and their residues may contaminate organic agriculture. To understand the significance of this contamination, also in small-scale farming systems in sub-Saharan Africa, quantitative data is required. Therefore, we compared synthetic insecticide and botanical/biopesticide residues in conventional and organic agricultural production systems after nine years of continuous cultivation of a maize-based crop rotation system at two sites in Kenya. Our results show high detectable concentrations of synthetic insecticide residues (imidacloprid, acetamiprid, chlorpyrifos, and chlorantraniliprole) in conventional plant produce and soil. Furthermore, the organophosphate chlorpyrifos was detected at concentrations above European Union Maximum Residue Limits (MRL) for plant produce, indicating potential risks for human health. Additionally, we detected imidacloprid, acetamiprid, chlorpyrifos, and chlorantraniliprole concentrations in the soil, indicating potential environmental harm. No residues of biopesticide/botanicals were detected in any of the production systems. However, we detected imidacloprid and chlorantraniliprole in organic plots. The findings indicate that the MRLs can be crossed even if synthetic insecticides are applied according to or below the recommended rates on the conventional plots. Thus, synthetic insecticides potentially risk human health and the environment, while botanicals and bio-pesticides represent a safe alternative
Muscle fiber conduction velocity is more affected after eccentric than concentric exercise
It has been shown that mean muscle fiber conduction velocity (CV) can be acutely impaired after eccentric exercise. However, it is not known whether this applies to other exercise modes. Therefore, the purpose of this experiment was to compare the effects of eccentric and concentric exercises on CV, and amplitude and frequency content of surface electromyography (sEMG) signals up to 24 h post-exercise. Multichannel sEMG signals were recorded from biceps brachii muscle of the exercised arm during isometric maximal voluntary contraction (MVC) and electrically evoked contractions induced by motor-point stimulation before, immediately after and 2 h after maximal eccentric (ECC group, N = 12) and concentric (CON group, N = 12) elbow flexor exercises. Isometric MVC decreased in CON by 21.7 ± 12.0% (± SD, p < 0.01) and by 30.0 ± 17.7% (p < 0.001) in ECC immediately post-exercise when compared to baseline. At 2 h post-exercise, ECC showed a reduction in isometric MVC by 24.7 ± 13.7% (p < 0.01) when compared to baseline, while no significant reduction (by 8.0 ± 17.0%, ns) was observed in CON. Similarly, reduction in CV was observed only in ECC both during the isometric MVC (from baseline of 4.16 ± 0.3 to 3.43 ± 0.4 m/s, p < 0.001) and the electrically evoked contractions (from baseline of 4.33 ± 0.4 to 3.82 ± 0.3 m/s, p < 0.001). In conclusion, eccentric exercise can induce a greater and more prolonged reduction in muscle force production capability and CV than concentric exercis
- âŠ