Intravenous Alcohol Self-Administration in the P Rat

Alcohol consumption produces a complex array of effects that can be divided into two types: the explicit pharmacological effects of ethanol (which can be temporally separate from time of intake) and the more temporally “relevant” effects (primarily olfactory and taste) that bridge the time from intake to onset of the pharmacological effects. Intravenous (IV) self-administration of ethanol limits the confounding “non-pharmacological” effects associated with oral consumption, allows for controlled and precise dosing, and bypasses first order absorption kinetics, allowing for more direct and better-controlled assessment of alcohol’s effect on the brain. IV ethanol self-administration has been reliably demonstrated in mouse and human experimental models; however, models of IV self-administration have been historically problematic in the rat. An operant multiple-schedule study design was used to elucidate the role of each component of a compound IV-ethanol plus oral-sucrose reinforcer. Male alcohol-preferring P rats had free access to both food and water during all IV self-administration sessions. Animals were trained to press a lever for orally delivered 1% sucrose (1S) on a fixed ratio 4 schedule, and then surgically implanted with an indwelling jugular catheter. Animals were then trained to respond on a multiple FR4-FR4 schedule composed of alternating 2.5-min components across 30-min sessions. For the multiple schedule, two components were used: an oral 1S only and an oral 1S plus IV 20% ethanol (25 mg/kg/injection). Average total ethanol intake was 0.47 ± 0.04 g/kg. We found significantly higher earning of sucrose-only reinforcers and greater sucrose-lever error responding relative to the compound oral-sucrose plus IV-ethanol reinforcer. These response patterns suggest that sucrose, not ethanol, was responsible for driving overall responding. The work with a compound IV ethanol-oral sucrose reinforcer presented here suggests that the existing intravenous ethanol self-administration methodology cannot overcome the aversive properties of ethanol via this route in the rat

Paradigm change in hydrogel sensor manufacturing: From recipe-driven to specification-driven process optimization

The volume production of industrial hydrogel sensors lacks a quality-assuring manufacturing technique for thin polymer films with reproducible properties. Overcoming this problem requires a paradigm change from the current recipe-driven manufacturing process to a specification-driven one. This requires techniques to measure quality-determining hydrogel film properties as well as tools and methods for the control and optimization of the manufacturing process. In this paper we present an approach that comprehensively addresses these issues. The influence of process parameters on the hydrogel film properties and the resulting sensor characteristics have been assessed by means of batch manufacturing tests and the application of several measurement techniques. Based on these investigations, we present novel methods and a tool for the optimization of the cross-linking process step, with the latter being crucial for the sensor sensitivity. Our approach is applicable to various sensor designs with different hydrogels. It has been successfully tested with a sensor solution for surface technology based on PVA/PAA hydrogel as sensing layer and a piezoelectric thickness shear resonator as transducer. Finally, unresolved issues regarding the measurement of hydrogel film parameters are outlined for future research

Paradigm change in hydrogel sensor manufacturing: from recipe-driven to specification-driven process optimization

The volume production of industrial hydrogel sensors lacks a quality-assuring manufacturing technique for thin polymer films with reproducible properties. Overcoming this problem requires a paradigm change from the current recipe-driven manufacturing process to a specification-driven one. This requires techniques to measure quality-determining hydrogel film properties as well as tools and methods for the control and optimization of the manufacturing process. In this paper we present an approach that comprehensively addresses these issues. The influence of process parameters on the hydrogel film properties and the resulting sensor characteristics have been assessed by means of batch manufacturing tests and the application of several measurement techniques. Based on these investigations, we present novel methods and a tool for the optimization of the cross-linking process step, with the latter being crucial for the sensor sensitivity. Our approach is applicable to various sensor designs with different hydrogels. It has been successfully tested with a sensor solution for surface technology based on PVA/PAA hydrogel as sensing layer and a piezoelectric thickness shear resonator as transducer. Finally, unresolved issues regarding the measurement of hydrogel film parameters are outlined for future research

A performance comparison of the contiguous allocation strategies in 3D mesh connected multicomputers

The performance of contiguous allocation strategies can be significantly affected by the distribution of job execution times. In this paper, the performance of the existing contiguous allocation strategies for 3D mesh multicomputers is re-visited in the context of heavy-tailed distributions (e.g., a Bounded Pareto distribution). The strategies are evaluated and compared using simulation experiments for both First-Come-First-Served (FCFS) and Shortest-Service-Demand (SSD) scheduling strategies under a variety of system loads and system sizes. The results show that the performance of the allocation strategies degrades considerably when job execution times follow a heavy-tailed distribution. Moreover, SSD copes much better than FCFS scheduling strategy in the presence of heavy-tailed job execution times. The results also show that the strategies that depend on a list of allocated sub-meshes for both allocation and deallocation have lower allocation overhead and deliver good system performance in terms of average turnaround time and mean system utilization

Treatment of multiple adjacent RT 1 gingival recessions with the modified coronally advanced tunnel (MCAT) technique and a collagen matrix or palatal connective tissue graft: 9-year results of a split-mouth randomized clinical trial.

OBJECTIVES To evaluate t he long-term outcomes following treatment of RT 1 multiple adjacent gingival recessions (MAGR) using the modified coronally advanced tunnel (MCAT) with either a collagen matrix CM or a connective tissue graft (CTG). MATERIAL AND METHODS Sixteen of the original 22 subjects included in a randomized, controlled split-mouth clinical trial were available for the 9-year follow-up (114 sites). Recessions were randomly treated by means of MCAT + CM (test) or MCAT + CTG (control). Complete root coverage (CRC), mean root coverage (MRC), gingival recession depth (GRD), probing pocket depth (PD), keratinized tissue width (KTW), and thickness (KGT) were compared with baseline values and with the 12-month results. RESULTS After 9 years, CRC was observed in 2 patients, one in each group. At 9 years, MRC was 23.0 ± 44.5% in the test and 39.7 ± 35.1% in the control group (p = 0.179). The MRC reduction compared to 12 months was - 50.1 ± 47.0% and - 48.3 ± 37.7%, respectively. The upper jaw obtained 31.92 ± 43.0% of MRC for the test and 51.1 ± 27.8% for the control group (p = 0.111) compared to the lower jaw with 8.3 ± 46.9% and 20.7 ± 40.3%. KTW and KGT increased for both CM and CTG together from 2.0 ± 0.7 to 3.1 ± 1.0 mm (< 0.0001). There were no statistically significant changes in PD. CONCLUSION The present results indicate that (a) treatment of MAGR using MCAT in conjunction with either CM or CTG is likely to show a relapse over a period of 9 years, and (b) the outcomes obtained in maxillary areas seem to be more stable compared to the mandibular ones. CLINICAL RELEVANCE The mean root coverage at 12 months could not be fully maintained over 9 years. On a long-term basis, the results seem to be less stable in the mandible as compared to maxillary areas

Response to ranibizumab therapy in neovascular AMD - an evaluation of good and bad responders

Background: Treatment of neovascular age-related macular degeneration (AMD) with Lucentis® shows a broad spectrum regarding the course of visual acuity (VA). While some patients show a good response (increase in VA), others disclose much less promising results. Patients and Methods: A retrospective data analysis of all eyes treated for neovascular AMD at the University Hospital of Zurich, Switzerland for at least 12 months was carried out. The courses of VA between the 90th (good responders, GR) and the 10th (bad responders, BR) percentiles were compared at 3, 12 and 24 months from baseline. An analysis regarding demographic data, lesion type and size as well as injection frequency and visits was done and predictive factors for GR and BR were evaluated. Results: Marked differences in the course of VA between GR (n = 30) and BR (n = 30) are already observed 3 months from baseline. In GR the gains in VA after 3, 12 and 24 were 15.7 ± 9 letters ETDRS, 25.3 ± 7 and 14.0 ± 14. BR showed a deterioration of 8.3 ± 11 letters ETDRS after 3, 22.1 ± 8 after 12 and 23.6 ± 13 after 24 months. The gender distribution was equal with a higher percentage of female patients (64 % in BR and 66 % in GR). The baseline VA was statistically significantly lower in GR (45.7 ± 10 vs. 55.4 ± 11, p < 0.05) than in BR. No other significant differences in baseline data were found, and no predictor for group membership could be identified. Conclusions: Only the course of VA in the first three months seems to be of value for an estimation of the response to treatment. In the future the response to treatment in the early phase may influence the treatment algorithm and the injection frequency

Type I and type II interferon responses in two human liver cell lines (Huh-7 and HuH6)

AbstractMost studies investigating the biology of Hepatitis C virus (HCV) have used the human hepatoma cell line Huh-7 or subclones thereof, as these are the most permissive cell lines for HCV infection and replication. Other cell lines also support replication of HCV, most notably the human hepatoblastoma cell line HuH6. HCV replication in cell culture is generally highly sensitive to interferons (IFNs) and differences in the IFN-mediated inhibition of virus replication may reflect alterations in the IFN-induced antiviral response inherent to different host cells. For example, HCV replication is highly sensitive to IFN-γ treatment in Huh-7, but not in HuH6 cells. In this study, we used microarray-based gene expression profiling to compare the response of Huh-7 and HuH6 cells to stimulation with IFN-α and IFN-γ. Furthermore, we determined whether the resistance of HCV replication in HuH6 cells can be linked to differences in the expression profile of IFN-regulated genes. Although both cells lines responded to IFNs with rapid changes in gene expression, thereby demonstrating functional type I and type II signaling pathways, differences were observed for a number of genes. Raw and normalized expression data have been deposited in GEO under accession number GSE68927

Alcohol Affects the P3 Component of an Adaptive Stop Signal Task ERP

BACKGROUND The P3 component of the event-related potential (ERP) has been particularly useful in alcohol research for identifying endophenotypes of alcohol use disorder (AUD) risk in sober subjects. However, practice and/or fatigue reduces P3 amplitude, limiting the ability to ascertain acute and adaptive effects of alcohol exposure. Here, we report acute alcohol effects on P3 amplitude and latency using an adaptive stop signal task (aSST). METHODS One hundred and forty eight nondependent moderate to heavy social drinkers, age 21 to 27, participated in 2 single-blind, alcohol or placebo, counterbalanced sessions approximately one week apart. During each session, subjects performed an adaptive stop signal task (aSST) at (1) baseline, (2) upon reaching the target 60 mg/dL breath alcohol concentration or at the equivalent time during the placebo session, and (3) approximately 135 minutes later while the breath alcohol concentration was clamped. Here, we report on differences between baseline and first subsequent measurements across the experimental sessions. During each aSST run, the stop signal delay (SSD, the time between stop and go signals) adjusted trial-by-trial based on the subject’s performance. RESULTS The aSST reliably generated a STOP P3 component that did not change significantly with repeated task performance. The pre-infusion SSD distribution was bimodal, with mean values several hundred msec apart (FAST: 153 msec and SLOW: 390 msec). This suggested different response strategies: FAST SSD favoring “going” over “stopping,” and SLOW SSD favoring “stopping” over “going”. Exposure to alcohol at 60 mg/dL differentially affected the amplitude and latency of the STOP P3 according to SSD group. Alcohol significantly reduced P3 amplitude in the SLOW SSD compared to FAST SSD group, but significantly increased P3 latency in the FAST SSD compared to SLOW SSD group. CONCLUSIONS The aSST is a robust and sensitive task for detecting alcohol induced changes in inhibition behavior as measured by the P3 component in a within subject design. Alcohol was associated with P3 component changes which varied by SSD group, suggesting a differential effect as a function of task strategy. Overall, the data support the potential utility of the aSST in the detection of alcohol response related AUD risk