Searching for intra-cloud positive leaders in VHF

We have used the LOw-Frequency ARray (LOFAR) to search for the growing tip of an intra-cloud (IC) positive leader. Even with our most sensitive beamforming method, where we coherently add the signals of about 170 antenna pairs, we were not able to detect any emission from the tip. Instead, we put constraints on the emissivity of very-high frequency (VHF) radiation from the tip at 0.5 pJ/MHz at 60 MHz, integrated over 100 ns. The limit is independent on whether this emission is in the form of short pulses or continuously radiating. The non-observation of VHF radiation from intra-cloud positive leaders implies that they proceed in an extremely gradual process, which is in sharp contrast with the observations of other parts of a lightning discharge.</p

Accelerator measurements of magnetically-induced radio emission from particle cascades with applications to cosmic-ray air showers

For fifty years, cosmic-ray air showers have been detected by their radio emission. We present the first laboratory measurements that validate electrodynamics simulations used in air shower modeling. An experiment at SLAC provides a beam test of radio-frequency (RF) radiation from charged particle cascades in the presence of a magnetic field, a model system of a cosmic-ray air shower. This experiment provides a suite of controlled laboratory measurements to compare to particle-level simulations of RF emission, which are relied upon in ultra-high-energy cosmic-ray air shower detection. We compare simulations to data for intensity, linearity with magnetic field, angular distribution, polarization, and spectral content. In particular, we confirm modern predictions that the magnetically induced emission in a dielectric forms a cone that peaks at the Cherenkov angle and show that the simulations reproduce the data within systematic uncertainties.Comment: 5 pages, 7 figure

Measurement of the circular polarization in radio emission from extensive air showers confirms emission mechanisms

We report here on a novel analysis of the complete set of four Stokes parameters that uniquely determine the linear and/or circular polarization of the radio signal for an extensive air shower. The observed dependency of the circular polarization on azimuth angle and distance to the shower axis is a clear signature of the interfering contributions from two different radiation mechanisms, a main contribution due to a geomagnetically-induced transverse current and a secondary component due to the build-up of excess charge at the shower front. The data, as measured at LOFAR, agree very well with a calculation from first principles. This opens the possibility to use circular polarization as an investigative tool in the analysis of air shower structure, such as for the determination of atmospheric electric fields.Comment: Accepted for publication in Phys. Rev.

Realtime processing of LOFAR data for the detection of nano-second pulses from the Moon

The low flux of the ultra-high energy cosmic rays (UHECR) at the highest energies provides a challenge to answer the long standing question about their origin and nature. Even lower fluxes of neutrinos with energies above $10^{22}$ eV are predicted in certain Grand-Unifying-Theories (GUTs) and e.g.\ models for super-heavy dark matter (SHDM). The significant increase in detector volume required to detect these particles can be achieved by searching for the nano-second radio pulses that are emitted when a particle interacts in Earth's moon with current and future radio telescopes. In this contribution we present the design of an online analysis and trigger pipeline for the detection of nano-second pulses with the LOFAR radio telescope. The most important steps of the processing pipeline are digital focusing of the antennas towards the Moon, correction of the signal for ionospheric dispersion, and synthesis of the time-domain signal from the polyphased-filtered signal in frequency domain. The implementation of the pipeline on a GPU/CPU cluster will be discussed together with the computing performance of the prototype.Comment: Proceedings of the 22nd International Conference on Computing in High Energy and Nuclear Physics (CHEP2016), US

Cosmic Ray Physics with the LOFAR Radio Telescope

The LOFAR radio telescope is able to measure the radio emission from cosmic ray induced air showers with hundreds of individual antennas. This allows for precision testing of the emission mechanisms for the radio signal as well as determination of the depth of shower maximum $X_{\max}$, the shower observable most sensitive to the mass of the primary cosmic ray, to better than 20 g/cm$^2$. With a densely instrumented circular area of roughly 320 m$^2$, LOFAR is targeting for cosmic ray astrophysics in the energy range $10^{16}$ - $10^{18}$ eV. In this contribution we give an overview of the status, recent results, and future plans of cosmic ray detection with the LOFAR radio telescope.Comment: Proceedings of the 26th Extended European Cosmic Ray Symposium (ECRS), Barnaul/Belokurikha, 201

Calibration of the LOFAR low-band antennas using the Galaxy and a model of the signal chain

The LOw-Frequency ARray (LOFAR) is used to make precise measurements of radio emission from extensive air showers, yielding information about the primary cosmic ray. Interpreting the measured data requires an absolute and frequency-dependent calibration of the LOFAR system response. This is particularly important for spectral analyses, because the shape of the detected signal holds information about the shower development. We revisit the calibration of the LOFAR antennas in the range of 30 - 80 MHz. Using the Galactic emission and a detailed model of the LOFAR signal chain, we find an improved calibration that provides an absolute energy scale and allows for the study of frequency-dependent features in measured signals. With the new calibration, systematic uncertainties of 13% are reached, and comparisons of the spectral shape of calibrated data with simulations show promising agreement.Comment: 23 pages, 10 figure

A high-precision interpolation method for pulsed radio signals from cosmic-ray air showers

Analysis of radio signals from cosmic-ray induced air showers has been shown to be a reliable method to extract shower parameters such as primary energy and depth of shower maximum. The required detailed air shower simulations take 1 to 3 days of CPU time per shower for a few hundred antennas. With nearly $60,000$ antennas envisioned to be used for air shower studies at the Square Kilometre Array (SKA), simulating all of these would come at unreasonable costs. We present an interpolation algorithm to reconstruct the full pulse time series at any position in the radio footprint, from a set of antennas simulated on a polar grid. Relying on Fourier series representations and cubic splines, it significantly improves on existing linear methods. We show that simulating about 200 antennas is sufficient for high-precision analysis in the SKA era, including e.g. interferometry which relies on accurate pulse shapes and timings. We therefore propose the interpolation algorithm and its implementation as a useful extension of radio simulation codes, to limit computational effort while retaining accuracy.Comment: 19 pages, 12 figures. Submitted for publication in JINST (Journal of Instrumentation

A high-precision interpolation method for pulsed radio signals from cosmic-ray air showers

Analysis of radio signals from cosmic-ray induced air showers has been shown to be a reliable method to extract shower parameters such as primary energy and depth of shower maximum. The required detailed air shower simulations take 1 to 3 days of CPU time per shower for a few hundred antennas. With nearly 60,000 antennas envisioned to be used for air shower studies at the Square Kilometre Array (SKA), simulating all of these would come at unreasonable costs. We present an interpolation algorithm to reconstruct the full pulse time series at any position in the radio footprint, from a set of antennas simulated on a polar grid. Relying on Fourier series representations and cubic splines, it significantly improves on existing linear methods. We show that simulating about 200 antennas is sufficient for high-precision analysis in the SKA era, including e.g. interferometry which relies on accurate pulse shapes and timings. We therefore propose the interpolation algorithm and its implementation as a useful extension of radio simulation codes, to limit computational effort while retaining accuracy

Constraining the cosmic-ray mass composition by measuring the shower length with SKA

The current generation of air shower radio arrays has demonstrated that the atmospheric depth of the shower maximum Xmax can be reconstructed with high accuracy. These experiments are now contributing to mass composition studies in the energy range where a transition from galactic to extragalactic cosmic-ray sources is expected. However, we are still far away from an unambiguous interpretation of the data. Here we propose to use radio measurements to derive a new type of constraint on the mass composition, by reconstructing the shower length L. The low-frequency part of the Square Kilometer Array will have an extremely high antenna density of roughly 60.000 antennas within one square kilometer, and is the perfect site for high-resolution studies of air showers. In this contribution, we discuss the impact of being able to reconstruct L, and the unique contribution that SKA can make to cosmic-ray science.Comment: Proceedings 9th International Workshop on Acoustic and Radio EeV Neutrino Detection Activities - ARENA2022, 7-10 June 2022, Santiago de Compostela, Spain (8 pages