13,622 research outputs found
Verification test of the MSFC solar simulator using a Honeywell double-covered liquid solar collector
Additional verification data to support the utilization of the MSFC Solar Simulator for testing solar collectors was obtained. The Honeywell double-covered liquid solar collector number 2 for which thermal performance data under natural outdoor conditions had been previously obtained was installed on the Solar Simulator and subjected to a series of eight tests under various conditions of wind flow rate. Although these test conditions were not absolutely identical to those of the outdoor tests, they are considered to be sufficiently representative to provide a basis for an accurate comparative analysis of the data recorded for both test programs
Indoor thermal performance evaluation of Daystar solar collector
The test procedures used and results obtained from a test program to obtain thermal performance data on a Daystar Model 21B, S/N 02210, Unit 2, liquid solar collector under simulated conditions are described. The test article is a flat plate solar collector using liquid as a heat transfer medium. The absorber plate is copper and coated with black paint. Between the tempered low iron glass and absorber plate is a polycarbonate trap used to suppress convective heat loss. The collector incorporates a convector heat dump panel to limit temperature excursions during stagnation. The following tests were conducted: (1) collector thermal efficiency; (2) collector time constant; (3) collector incident angle modifier; (4) collector heat loss coefficient; and (5) collector stagnation
Bayesian approaches to technology assessment and decision making
Until the mid-1980s, most economic analyses of healthcare technologies were based on decision theory and used decision-analytic models. The goal was to synthesize all relevant clinical and economic evidence for the purpose of assisting decision makers to efficiently allocate society's scarce resources. This was true of virtually all the early cost-effectiveness evaluations sponsored and/or published by the U.S. Congressional Office of Technology Assessment (OTA) (15), Centers of Disease Control and Prevention (CDC), the National Cancer Institute, other elements of the U.S. Public Health Service, and of healthcare technology assessors in Europe and elsewhere around the world. Methodologists routinely espoused, or at minimum assumed, that these economic analyses were based on decision theory (8;24;25). Since decision theory is rooted in—in fact, an informal application of—Bayesian statistical theory, these analysts were conducting studies to assist healthcare decision making by appealing to a Bayesian rather than a classical, or frequentist, inference approach. But their efforts were not so labeled. Oddly, the statistical training of these decision analysts was invariably classical, not Bayesian. Many were not—and still are not—conversant with Bayesian statistical approaches
Health Care Opinion Leaders' Views on Health Care Delivery System Reform
Presents findings of a survey of experts on reforming delivery systems -- organized delivery systems, patient-centered medical homes, and retail clinics -- and recommended policy strategies, such as improving the primary care system
Health Care Opinion Leaders' Views on the Quality and Safety of Health Care in the United States
Presents findings from an annual survey of a diverse group of experts on strategies to improve the quality and safety of health care in the United States
Health Care Opinion Leaders' Views on the Transparency of Health Care Quality and Price Information in the United States
Presents findings from a survey of experts on collecting and reporting public information on the quality and price of healthcare services; the role of transparency in improving quality, efficiency, and cost-effectiveness; and obstacles
A Cost-Index Approach to Valuing Investment In "Far Into The Future" Environmental Technology
Governments investing in long-lead technology development programs face considerable uncertainty as to whether the investment eventually will “pay off” for the taxpayer. This paper offers a framework to inform long-lead technology investment. We extend the theory of quality-adjusted cost indices to develop a conceptually rigorous, but data parsimonious, means of estimating consumer benefits from a new technology. We apply this model to a possible future electricity generation technology, space solar power (SSP). The United States, Japan, and other governments have begun investing in SSP but lack the benefit of a relevant economic context for informed decisions. We frame and analyze the economic relationship between SSP and competing electricity generation technologies with respect to direct costs, environmental externalities, and reliability. We also explicitly incorporate uncertainty and consider differences in the resource endowments available to electricity markets by considering four distinct world geographic regions.energy, environment, technological change, cost indices, space technology
Evidence for an intermediate mass black hole and a multi-zone warm absorber in NGC 4395
We report on the results of an analysis in the X-ray band of a recent long
ASCA observation of NGC 4395, the most variable low-luminosity AGN known. A
relativistically-broadened iron line at ~6.4 keV is clearly resolved in the
time-averaged spectrum, with an equivalent width of 310^{+70}_{-90} eV.
Time-resolved spectral analysis of the heavily absorbed soft X-ray band
confirms the existence of a variable, multi-zone warm absorber in this source,
as proposed in a previous analysis of a shorter ASCA observation. The light
curve of the source is wildly variable on timescales of hours or less, and a
factor of nearly 10 change in count-rate was recorded in a period of less than
2000 s. The long observation and variability of the source allowed the power
density spectrum (PDS) to be constructed to an unprecedented level of detail.
There is evidence for a break in the PDS from a slope of \alpha~1 to \alpha~1.8
at a frequency of around 3 \times 10^{-4} Hz. The central black hole mass of
NGC 4395 is estimated to be approximately 10^4-10^5 solar masses using the
break in the PDS, a result consistent with previous analyses using optical and
kinematical techniques.Comment: 8 pages, 6 figures, accepted for publication in MNRA
Geometry modeling and multi-block grid generation for turbomachinery configurations
An interactive 3D grid generation code, Turbomachinery Interactive Grid genERation (TIGER), was developed for general turbomachinery configurations. TIGER features the automatic generation of multi-block structured grids around multiple blade rows for either internal, external, or internal-external turbomachinery flow fields. Utilization of the Bezier's curves achieves a smooth grid and better orthogonality. TIGER generates the algebraic grid automatically based on geometric information provided by its built-in pseudo-AI algorithm. However, due to the large variation of turbomachinery configurations, this initial grid may not always be as good as desired. TIGER therefore provides graphical user interactions during the process which allow the user to design, modify, as well as manipulate the grid, including the capability of elliptic surface grid generation
Qualitative properties of large buckled states of spherical shells
A system of 6th-order quasi-linear Ordinary Differential Equations is analyzed to show the global existence of axisymmetrically buckled states. A surprising nodal property is obtained which shows that everywhere along a branch of solutions that bifurcates from a simple eigenvalue of the linearized equation, the number of simultaneously vanishing points of both shear resultant and circumferential bending moment resultant remains invariant, provided that a certain auxiliary condition is satisfied
- …