10 research outputs found
Fatigue resistance of natural rubber in seawater with comparison to air
Fatigue properties of filled natural rubber in seawater environment are investigated by uniaxial fatigue and crack propagation experiments, and the damage is analyzed by scanning electron microscopy. The behavior under relaxing and non-relaxing loading conditions is studied and the results are compared to those obtained in air environment. For relaxing loading conditions, fatigue behavior is the same in both environments. Under non-relaxing conditions at large strain levels, for which the influence of strain-induced crystallization is important, fatigue life is longer in seawater. Such behavior could be explained by increased internal temperatures of specimens tested in air due to lower heat conductivity of air as compared to seawater. Such conclusion is also supported by the damage mechanisms observed under non-relaxing loading conditions
Influence of pressure cycling on damage evolution in an unfilled EPDM exposed to high-pressure hydrogen
Unidentified Building, circa 1920
An unidentified campus building.The Atlanta University Center Robert W. Woodruff Library acknowledges the generous support of the National Endowment for Humanities - Humanities Collections and Reference Resources Implementation Project Grant in supporting the processing and digitization of a number of its major archival collections as part of the project: Spreading the Word: Expanding Access to African American Religious Archival Collections at the Atlanta University Center Robert W. Woodruff Library.</em
Improving the Dynamic Properties of MRE under Cyclic Loading by Incorporating Silicon Carbide Nanoparticles
The Fatigue Threshold of Rubber and Its Characterization Using the Cutting Method
Below a limiting value of tearing energy called the intrinsic strength or fatigue threshold (T-0), cracks will not grow in rubber due to fatigue; hence, this material characteristic is important to understand from both fundamental and practical perspectives. We summarize key aspects of the fatigue threshold, including the Lake-Thomas molecular interpretation of T-0 in terms of fracture of polymer network chains in crosslinked elastomers. The various testing approaches for quantifying T-0 are also discussed, with a focus on the classic Lake-Yeoh cutting method which was recently revived by the introduction of a commercial testing instrument that applies this procedure, the Intrinsic Strength Analyser (ISA). A validation of the cutting method is also given by demonstrating that a 2-h test on the ISA yields a value of T-0 that is essentially identical to the T-0 from near-threshold fatigue crack growth (FCG) measurements that require 7.5 months of continuous testing. Compound formulation effects - polymer type, crosslink density, type and amount of reinforcing fillers, and addition of oils/plasticizers - are examined based on the limited published research in this area and our new results. At the end, some insights are offered into using the fatigue threshold to develop highly durable rubber products.Ministry of Education, Youth and Sports of the Czech Republic - DKRVO [RP/CPS/2020/004