11,109 research outputs found
Recommended from our members
Compensation for Uneven Surfaces When Building Laser Deposited Structures
Direct Laser Deposition (DLD) is a blown-powder laser deposition process that can be
used to quickly produce, modify or repair fully-dense metallic parts by a layered manufacturing
method. However, uneven substrate surfaces often cause variation in the deposited layer which
is magnified by succeeding layers. Research carried out at the University of Liverpool has
resulted in a non-feedback layer height controlling process based on controlling the shape of the
powder streams emitted from a four-port side feed nozzle. This method limits deposited layer
height by causing a sharp reduction of catchment efficiency in the vertical plane at a fixed
distance from the powder feed nozzle, and is therefore capable of depositing a consistent layer
height in spite of power, powder flow or process velocity variation. This paper demonstrates
how this method of layer height control can compensate for irregular substrate surfaces in the
production of accurate DLD parts.Mechanical Engineerin
A stochastic theory for temporal fluctuations in self-organized critical systems
A stochastic theory for the toppling activity in sandpile models is
developed, based on a simple mean-field assumption about the toppling process.
The theory describes the process as an anti-persistent Gaussian walk, where the
diffusion coefficient is proportional to the activity. It is formulated as a
generalization of the It\^{o} stochastic differential equation with an
anti-persistent fractional Gaussian noise source. An essential element of the
theory is re-scaling to obtain a proper thermodynamic limit, and it captures
all temporal features of the toppling process obtained by numerical simulation
of the Bak-Tang-Wiesenfeld sandpile in this limit.Comment: 9 pages, 4 figure
Effect of forward motion on engine noise
Methods used to determine a procedure for correcting static engine data for the effects of forward motion are described. Data were analyzed from airplane flyover and static-engine tests with a JT8D-109 low-bypass-ratio turbofan engine installed on a DC-9-30, with a CF6-6D high-bypass-ratio turbofan engine installed on a DC-10-10, and with a JT9D-59A high-bypass-ratio turbofan engine installed on a DC-10-40. The observed differences between the static and the flyover data bases are discussed in terms of noise generation, convective amplification, atmospheric propagation, and engine installation. The results indicate that each noise source must be adjusted separately for forward-motion and installation effects and then projected to flight conditions as a function of source-path angle, directivity angle, and acoustic range relative to the microphones on the ground
Content & Watkins's account of natural axiomatizations
This paper briefly recounts the importance of the notion of natural axiomatizations for explicating hypothetico-deductivism, empirical significance, theoretical reduction, and organic fertility. Problems for the account of natural axiomatizations developed by John Watkins in Science and Scepticism and the revised account developed by Elie Zahar are demonstrated. It is then shown that Watkins's account can be salvaged from various counter-examples in a principled way by adding the demand that every axiom of a natural axiomatization should be part of the content of the theory being axiomatized. The crucial point here is that content cannot simply be identified with the set of logical consequences of a theory, but must be restricted to a proper subset of the consequence set. It is concluded that the revised Watkins account has certain advantages over the account of natural axiomatizations offered in Gemes (1993)
Flows on scales of 150 Mpc?
We investigate the reality of large-scale streaming on scales of up to 150
Mpc using the peculiar motions of galaxies in three directions. New R-band CCD
photometry and spectroscopy for elliptical galaxies is used. The Fundamental
Plane distance indicator is calibrated using the Coma cluster and an
inhomogeneous Malmquist bias correction is applied. A linear bulk-flow model is
fitted to the peculiar velocities in the sample regions and the results do not
reflect the bulk flow observed by Lauer and Postman (LP). Accounting for the
difference in geometry between the galaxy distribution in the three regions and
the LP clustersconfirms the disagreement; assuming a low-density CDM power
spectrum, we find that the observed bulk flow of the galaxies in our sample
excludes the LP bulk flow at the 99.8% confidence level.Comment: 16 pages, 1 figur
Studies on optimizing potential energy functions for maximal intrinsic hyperpolarizability
We use numerical optimization to study the properties of (1) the class of
one-dimensional potential energy functions and (2) systems of point charges in
two-dimensions that yield the largest hyperpolarizabilities, which we find to
be within 30% of the fundamental limit. We investigate the character of the
potential energy functions and resulting wavefunctions and find that a broad
range of potentials yield the same intrinsic hyperpolarizability ceiling of
0.709.Comment: 9 pages, 9 figure
Delivering Urban Wellbeing through Transformative Community Enterprise
(c) The Author/sChristchurch, New Zealan
Feasibility of ultrafast picosecond laser cleaning of soiling on historical leather buckles
The aim of the research is to present a system recently developed and used for automated cleaning of artworks and to examine the suitability of using this ultrafast and precise computed-scanning picosecond laser (1064 nm) with a repetition rate of 10 kHz and a temporal pulse length of 10 ps for the removal of soiling from leather buckles without damaging the leather substrate. Preliminary tests will be performed with the model artificially aged vegetable tanned samples to determine the leather damage threshold fluence and the soiling ablation threshold fluence before using a laser for the removal of the soiling from a historical leather buckle. As laser cleaning requires a physical parameterization for optimization of cleaning accompanied with an assessment of the morphological and chemical changes of leather, an investigations were performed to determine the leather damage and ablation threshold fluences of artificially aged and historical vegetable tanned leather using a number of analytical techniques including differential scanning calorimetry, optical microscopy, scanning electronic microscope with energy dispersive X-ray analysis, colorimetry and Fourier transform infrared spectroscopy have been used. Following optimization trials of the picosecond laser cleaning parameters on model leather samples, satisfactory removal of the soiling over the historical leather surface is achieved
Chemical Resolution at Ionic Crystal Surfaces Using Dynamic Atomic Force Microscopy with Metallic Tips
We demonstrate that well prepared and characterized Cr tips can provide atomic resolution on the bulk NaCl(001) surface with dynamic atomic force microscopy in the noncontact regime at relatively large tip-sample separations. At these conditions, the surface chemical structure can be resolved yet tip-surface instabilities are absent. Our calculations demonstrate that chemical identification is unambiguous, because the interaction is always largest above the anions. This conclusion is generally valid for other polar surfaces, and can thus provide a new practical route for straightforward interpretation of atomically resolved images
- …