234 research outputs found

    Risk assessment of a fire involving combustible materials in a warehouse

    Get PDF
    International audienceThis paper presents the results of a numerical modeling into a rack fire in warehouse, and an identification of the visible flame shape when a fire is generalised over a whole warehouse after collapse of the roo

    On the effect of pressure, oxygen concentration, air flow and gravity on simulated pool fires

    Get PDF
    The initial development of a fire is characterized by the establishment of a diffusion flame over the surface of a the condensed fuel and is particularly influenced by gravity, with most of the gaseous flow induced by natural convection. Low initial momentum of the fuel vapor, strong buoyant flows induced by the hot post-combustion gases and consequently low values of the Froude number (inertia-gravity forces ratio) are typical of this kind of scenario. An experimental study is conducted by using a porous burner to simulate the burning of a horizontal combustible surface. Ethane is used as fuel and different mixtures of oxygen and nitrogen as oxidizer. The magnitude of the fuel injection velocities is restricted to values that will keep the Froude number on the order of 10-5, when calculated at normal gravity and pressure, which are characteristic of condensed fuel burning. Two different burners are used, a circular burner (62 mm diameter) placed inside a cylindrical chamber (0.3 m diameter and 1.0 m height) and a rectangular burner (50 mm wide by 200 mm long) placed in a wind tunnel (350 mm long) of rectangular cross section (120 mm wide and 90 mm height). The first burner is used to study the effect of pressure and gravity in the absence of a forced flow parallel to the surface. The second burner is used to study the effect of a forced flow parallel to the burner surface as well as the effect of oxygen concentration in the oxidizer flow. In this case experiments are also conducted at different gravity levels (micro-gravity, 0.2 g(sub 0), g(sub 0) and 1.8 g(sub 0)) to quantify the relative importance of buoyancy

    Rotational excitation of methylidynium (CH+) by a helium atom at high temperature

    Full text link
    We aim to obtain accurate rate coefficients for the collisional excitation of CH+ by He for high gas temperatures. The ab initio coupled-cluster [CCSD(T)] approximation was used to compute the interaction potential energy. Cross sections are then derived in the close coupling (CC) approach and rate coefficients inferred by averaging these cross sections over a Maxwell-Boltzmann distribution of kinetic energies. Cross sections are calculated up to 10'000 cm^-1 for J ranging from 0 to 10. Rate coefficients are obtained at high temperatures up to 2000 K.Comment: 4 pages, 3 figures, table with rate coefficients, accepted for publication by A&

    Casimir force between designed materials: what is possible and what not

    Full text link
    We establish strict upper limits for the Casimir interaction between multilayered structures of arbitrary dielectric or diamagnetic materials. We discuss the appearance of different power laws due to frequency-dependent material constants. Simple analytical expressions are in good agreement with numerical calculations based on Lifshitz theory. We discuss the improvements required for current (meta) materials to achieve a repulsive Casimir force.Comment: 9 pages, 4 figures, graphicx, v4: Europhysics Letters, in pres

    Modeling semi-conductor thermal properties. The dispersion role

    Full text link
    We study heat transport in semiconductor nanostructures by solving the Boltzmann Transport Equation (BTE) by means of the Discrete Ordinate Method (DOM). Relaxation time and phase and group velocitiy spectral dependencies are taken into account. The Holland model of phonon relaxation time is revisited and recalculated from dispersion relations (taken in litterature) in order to match bulk silicon and germanium values. This improved model is then used to predict silicon nanowire and nanofilm thermal properties in both ballistic and mesoscopic regimes

    Monte Carlo transient phonons transport in silicon and germanium at nanoscales

    Full text link
    Heat transport at nanoscales in semiconductors is investigated with a statistical method. The Boltzmann Transport Equation (BTE) which characterize phonons motion and interaction within the crystal lattice has been simulated with a Monte Carlo technique. Our model takes into account media frequency properties through the dispersion curves for longitudinal and transverse acoustic branches. The BTE collisional term involving phonons scattering processes is simulated with the Relaxation Times Approximation theory. A new distribution function accounting for the collisional processes has been developed in order to respect energy conservation during phonons scattering events. This non deterministic approach provides satisfactory results in what concerns phonons transport in both ballistic and diffusion regimes. The simulation code has been tested with silicon and germanium thin films; temperature propagation within samples is presented and compared to analytical solutions (in the diffusion regime). The two materials bulk thermal conductivity is retrieved for temperature ranging between 100 K and 500 K. Heat transfer within a plane wall with a large thermal gradient (250 K-500 K) is proposed in order to expose the model ability to simulate conductivity thermal dependence on heat exchange at nanoscales. Finally, size effects and validity of heat conduction law are investigated for several slab thicknesses

    Navigation visuelle dans un environnement ouvert : reconnaissance de vues panoramiques

    Get PDF
    Nous présentons un système de navigation pour robot autonome dans un environnement ouvert. Le robot rejoint un objectif en associant des mouvements aux informations visuelles provenant de l'environnement. Il utilise un apprentissage simple et en ligne. Il ne crée aucune carte complexe de son environnement. Le méchanisme s'avère efficace et robuste, de plus il semble en accord avec les observations animales. Enfin, notre implémentation dans un environnement réel supporte des perturbations importantes

    On the evolution of the molecular line profiles induced by the propagation of C-shock waves

    Full text link
    We present the first results of the expected variations of the molecular line emission arising from material recently affected by C-shocks (shock precursors). Our parametric model of the structure of C-shocks has been coupled with a radiative transfer code to calculate the molecular excitation and line profiles of shock tracers such as SiO, and of ion and neutral molecules such as H13CO+ and HN13C, as the shock propagates through the unperturbed medium. Our results show that the SiO emission arising from the early stage of the magnetic precursor typically has very narrow line profiles slightly shifted in velocity with respect to the ambient cloud. This narrow emission is generated in the region where the bulk of the ion fluid has already slipped to larger velocities in the precursor as observed toward the young L1448-mm outflow. This strongly suggests that the detection of narrow SiO emission and of an ion enhancement in young shocks, is produced by the magnetic precursor of C-shocks. In addition, our model shows that the different velocity components observed toward this outflow can be explained by the coexistence of different shocks at different evolutionary stages, within the same beam of the single-dish observations.Comment: 7 pages, 4 figures, accepted for publication in Ap

    Electron-Ion Recombination on Grains and Polycyclic Aromatic Hydrocarbons

    Get PDF
    With the high-resolution spectroscopy now available in the optical and satellite UV, it is possible to determine the neutral/ionized column density ratios for several different elements in a single cloud. Assuming ionization equilibrium for each element, one can make several independent determinations of the electron density. For the clouds for which such an analysis has been carried out, these different estimates disagree by large factors, suggesting that some process (or processes) besides photoionization and radiative recombination might play an important role in the ionization balance. One candidate process is collisions of ions with dust grains. Making use of recent work quantifying the abundances of polycyclic aromatic hydrocarbon molecules and other grains in the interstellar medium, as well as recent models for grain charging, we estimate the grain-assisted ion recombination rates for several astrophysically important elements. We find that these rates are comparable to the rates for radiative recombination for conditions typical of the cold neutral medium. Including grain-assisted ion recombination in the ionization equilibrium analysis leads to increased consistency in the various electron density estimates for the gas along the line of sight to 23 Orionis. However, not all of the discrepancies can be eliminated in this way; we speculate on some other processes that might play a role. We also note that grain-assisted recombination of H+ and He+ leads to significantly lower electron fractions than usually assumed for the cold neutral medium.Comment: LaTeX(12 pages, 8 figures, uses emulateapj5.sty, apjfonts.sty); submitted to ApJ; corrected typo
    • …
    corecore