14 research outputs found
Functional Autonomy Techniques for Manipulation in Uncertain Environments
As robotic platforms are put to work in an ever more diverse array of environments, their ability to deploy visuomotor capabilities without supervision is complicated by the potential for unforeseen operating conditions. This is a particular challenge within the domain of manipulation, where significant geometric, semantic, and kinetic understanding across the space of possible manipulands is necessary to allow effective interaction. To facilitate adoption of robotic platforms in such environments, this work investigates the application of functional, or behavior level, autonomy to the task of manipulation in uncertain environments. Three functional autonomy techniques are presented to address subproblems within the domain.
The task of reactive selection between a set of actions that incur a probabilistic cost to advance the same goal metric in the presence of an operator action preference is formulated as the Obedient Multi-Armed Bandit (OMAB) problem, under the purview of Reinforcement Learning. A policy for the problem is presented and evaluated against a novel performance metric, disappointment (analogous to prototypical MAB's regret), in comparison to adaptations of existing MAB policies. This is posed for both stationary and non-stationary cost distributions, within the context of two example planetary exploration applications of multi-modal mobility, and surface excavation.
Second, a computational model that derives semantic meaning from the outcome of manipulation tasks is developed, which leverages physics simulation and clustering to learn symbolic failure modes. A deep network extracts visual signatures for each mode that may then guide failure recovery. The model is demonstrated through application to the archetypal manipulation task of placing objects into a container, as well as stacking of cuboids, and evaluated against both synthetic verification sets and real depth images.
Third, an approach is presented for visual estimation of the minimum magnitude grasping wrench necessary to extract massive objects from an unstructured pile, subject to a given end effector's grasping limits, that is formulated for each object as a "wrench space stiction manifold". Properties are estimated from segmented RGBD point clouds, and a geometric adjacency graph used to infer incident wrenches upon each object, allowing candidate extraction object/force-vector pairs to be selected from the pile that are likely to be within the system's capability.</p
Granular Gym: High Performance Simulation for Robotic Tasks with Granular Materials
Granular materials are of critical interest to many robotic tasks in
planetary science, construction, and manufacturing. However, the dynamics of
granular materials are complex and often computationally very expensive to
simulate. We propose a set of methodologies and a system for the fast
simulation of granular materials on Graphics Processing Units (GPUs), and show
that this simulation is fast enough for basic training with Reinforcement
Learning algorithms, which currently require many dynamics samples to achieve
acceptable performance. Our method models granular material dynamics using
implicit timestepping methods for multibody rigid contacts, as well as
algorithmic techniques for efficient parallel collision detection between pairs
of particles and between particle and arbitrarily shaped rigid bodies, and
programming techniques for minimizing warp divergence on Single-Instruction,
Multiple-Thread (SIMT) chip architectures. We showcase our simulation system on
several environments targeted toward robotic tasks, and release our simulator
as an open-source tool
Neuromorphic tactile sensor array based on fiber Bragg gratings to encode object qualities
Emulating the sense of touch is fundamental to endow robotic systems with perception abilities. This work presents an unprecedented mechanoreceptor-like neuromorphic tactile sensor implemented with fiber optic sensing technologies. A robotic gripper was sensorized using soft and flexible tactile sensors based on Fiber Bragg Grating (FBG) transducers and a neuro-bio-inspired model to extract tactile features. The FBGs connected to the neuron model emulated biological mechanoreceptors in encoding tactile information by means of spikes. This conversion of inflowing tactile information into event-based spikes has an advantage of reduced bandwidth requirements to allow communication between sensing and computational subsystems of robots. The outputs of the sensor were converted into spiking on-off events by means of an architecture implemented in a Field Programmable Gate Array (FPGA) and applied to robotic manipulation tasks to evaluate the effectiveness of such information encoding strategy. Different tasks were performed with the objective to grant fine manipulation abilities using the features extracted from the grasped objects (i.e., size and hardness). This is envisioned to be a futuristic sensor technology combining two promising technologies: optical and neuromorphic sensing
Tactile Sensing and Control of Robotic Manipulator Integrating Fiber Bragg Grating Strain-Sensor
Tactile sensing is an instrumental modality of robotic manipulation, as it provides information that is not accessible via remote sensors such as cameras or lidars. Touch is particularly crucial in unstructured environments, where the robot's internal representation of manipulated objects is uncertain. In this study we present the sensorization of an existing artificial hand, with the aim to achieve fine control of robotic limbs and perception of object's physical properties. Tactile feedback is conveyed by means of a soft sensor integrated at the fingertip of a robotic hand. The sensor consists of an optical fiber, housing Fiber Bragg Gratings (FBGs) transducers, embedded into a soft polymeric material integrated on a rigid hand. Through several tasks involving grasps of different objects in various conditions, the ability of the system to acquire information is assessed. Results show that a classifier based on the sensor outputs of the robotic hand is capable of accurately detecting both size and rigidity of the operated objects (99.36 and 100% accuracy, respectively). Furthermore, the outputs provide evidence of the ability to grab fragile objects without breakage or slippage e and to perform dynamic manipulative tasks, that involve the adaptation of fingers position based on the grasped objects' condition
Neuromorphic tactile sensor array based on fiber Bragg gratings to encode object qualities
Emulating the sense of touch is fundamental to endow robotic systems with perception abilities. This work presents an unprecedented mechanoreceptor-like neuromorphic tactile sensor implemented with fiber optic sensing technologies. A robotic gripper was sensorized using soft and flexible tactile sensors based on Fiber Bragg Grating (FBG) transducers and a neuro-bio-inspired model to extract tactile features. The FBGs connected to the neuron model emulated biological mechanoreceptors in encoding tactile information by means of spikes. This conversion of inflowing tactile information into event-based spikes has an advantage of reduced bandwidth requirements to allow communication between sensing and computational subsystems of robots. The outputs of the sensor were converted into spiking on-off events by means of an architecture implemented in a Field Programmable Gate Array (FPGA) and applied to robotic manipulation tasks to evaluate the effectiveness of such information encoding strategy. Different tasks were performed with the objective to grant fine manipulation abilities using the features extracted from the grasped objects (i.e., size and hardness). This is envisioned to be a futuristic sensor technology combining two promising technologies: optical and neuromorphic sensing
Tactile Sensing and Control of Robotic Manipulator Integrating Fiber Bragg Grating Strain-Sensor
Tactile sensing is an instrumental modality of robotic manipulation, as it provides information that is not accessible via remote sensors such as cameras or lidars. Touch is particularly crucial in unstructured environments, where the robot's internal representation of manipulated objects is uncertain. In this study we present the sensorization of an existing artificial hand, with the aim to achieve fine control of robotic limbs and perception of object's physical properties. Tactile feedback is conveyed by means of a soft sensor integrated at the fingertip of a robotic hand. The sensor consists of an optical fiber, housing Fiber Bragg Gratings (FBGs) transducers, embedded into a soft polymeric material integrated on a rigid hand. Through several tasks involving grasps of different objects in various conditions, the ability of the system to acquire information is assessed. Results show that a classifier based on the sensor outputs of the robotic hand is capable of accurately detecting both size and rigidity of the operated objects (99.36 and 100% accuracy, respectively). Furthermore, the outputs provide evidence of the ability to grab fragile objects without breakage or slippage e and to perform dynamic manipulative tasks, that involve the adaptation of fingers position based on the grasped objects' condition
Combined Energy Harvesting and Control of Moball: A Barycentric Spherical Robot
The mobile sensor platform Moball uses an array of sliding magnets and solenoids inside a spherical shell to both harvest energy and displace its center of mass or barycenter from its center of rotation in order to control the path along which it rolls. Previous simulations of the harvesting potential for the complete system are validated experimentally, and certain phenomena that restrict effective operating conditions for energy harvesting are investigated. Tracking of characteristic trajectories for a single mass control element is used to assess the performance of the solenoids as actuators, and the ability of the system to generate a control torque during motion is demonstrated
Activation of T cells by carbamazepine and carbamazepine metabolites
BACKGROUND: T-cell-mediated hypersensitivity is a rare but serious manifestation of drug therapy. OBJECTIVES: To explore the mechanisms of drug presentation to T cells and the possibility that generation of metabolite-specific T cells may provoke cross-sensitization between drugs. METHODS: A lymphocyte transformation test was performed on 13 hypersensitive patients with carbamazepine, oxcarbazepine, and carbamazepine metabolites. Serial dilution experiments were performed to generate drug (metabolite)-specific T-cell clones to explore the structural basis of the T-cell response and mechanisms of antigen presentation. 3-Dimensional energy-minimized structures were generated by using computer modeling. The role of drug metabolism was analyzed with 1-aminobenzotriazole. RESULTS: Lymphocytes and T-cell clones proliferated with carbamazepine, oxcarbazepine, and some (carbamazepine 10,11 epoxide, 10-hydroxy carbamazepine) but not all stable carbamazepine metabolites. Structure activity studies using 29 carbamazepine (metabolite)-specific T-cell clones revealed 4 patterns of drug recognition, which could be explained by generation of preferred 3-dimensional structural conformations. T cells were stimulated by carbamazepine (metabolites) bound directly to MHC in the absence of processing. The activation threshold for T-cell proliferation varied between 5 minutes and 4 hours. 1-Aminobenzotriazole, which inhibits cytochrome P450 activity, did not prevent carbamazepine-related T-cell proliferation. Substitution of the terminal amine residue of carbamazepine with a methyl group diminished T-cell proliferation. CONCLUSION: These data show that carbamazepine and certain stable carbamazepine metabolites stimulate T cells rapidly via a direct interaction with MHC and specific T-cell receptors. CLINICAL IMPLICATIONS: Some patients with a history of carbamazepine hypersensitivity possess T cells that cross-react with oxcarbazepine, providing a rationale for cross-sensitivity between the 2 drugs