Perylenediimide-based distributed feedback lasers with holographic relief gratings on dichromated gelatine

One dimensional second-order distributed feedback (DFB) lasers consisting of polystyrene (PS) films doped with a perylenediimide laser dye, deposited over dichromated gelatine (DCG) photoresist layers with solvent resistant relief gratings recorded by holographic lithography, are reported. The advantage of using the grating on DCG in the final device is that the fabrication process is simplified and the grating pattern better preserved, since no etching methods to transfer the grating to another substrate are needed. A very simple model, proposed to explain the experimental waveguide properties, has allowed identifying the waveguide mode at which DFB emission appears, which was the key to optimize the device performance. In the frame of this model, the thickness of the PS and DCG films could be adjusted in order to minimize the laser threshold and to control its wavelength tuneability. The performance of these lasers is comparable to that of recently reported devices based on the same active material, but deposited over high-quality DFB gratings engraved on SiO2 by nanoimprint lithography.We thank support from the Spanish Government (MINECO) and the European Community (FEDER) through Grant Nos. MAT2008-06648-C02 and MAT-2011-28167-C02, as well as to the University of Alicante. M.G.R. was supported by a CSIC fellowship within the program JAE

Implementation of a harvest control rule for northern Atlantic albacore

A Harvest Control Rule was developed for North Atlantic albacore during the 2013 assessment, this paper documents the procedure used.Versión del edito

Distributed feedback lasers based on perylenediimide dyes for label-free refractive index sensing

The refractive index sensing capabilitity of distributed feedback (DFB) lasers based on highly photostable (under ambient conditions) perylenediimide-based active films, are reported. The sensor bulk sensitivity is determined from changes in the laser emission wavelength upon exposure to different liquids. The role of the active film thickness (hf) on the sensor sensitivity and on the laser parameters is studied. Sensors based on very thin films (hf = 160 nm) show the highest sensitivities, but their laser thresholds are relatively high and their operational durabilities moderate. The use of thicker films (hf = 850 nm) allows reducing the laser threshold and increasing the durability by two orders of magnitude. In this case, a higher sensitivity is achieved when the sensor operates at the wavelength corresponding to the first-order TE1 mode, instead of at the TE0 one. Finally, it is also shown that the inclusion of a high refractive index TiO2 layer on top of the sensor structure improves the sensitivity by around two times.This work was supported by the Spanish Government (MINECO) and the European Community (FEDER) through grant no. MAT-2011–28167-C02. This work was partially funded by the Basque Government within the framework of the Etortek Program (Grant No. IE13-360). M. Morales-Vidal has been partly supported by a MINECO FPI fellowship (no. BES-2009-020747)

Improved performance of perylenediimide-based lasers

The aim of this work was to improve the laser performance, in terms of threshold and operational lifetime, of lasers based on polymer films doped with perylenediimide (PDI) derivatives as active media. For such purpose, we first investigated the amplified spontaneous emission (ASE) properties of perylene orange (PDI-O), when doped into polystyrene (PS) films. Lower ASE thresholds and larger photostabilities than those of similar films containing another PDI derivative (PDI-C6), recently reported in the literature, have been measured. Results have been interpreted in terms of the photoluminescence efficiency of the films, which depends on the type of molecular arrangement, inferred with the help of nuclear magnetic resonance experiments. We also show that PS films have a better ASE performance, i.e. lower thresholds and larger photostabilities, than those based on poly(methyl methacrylate), which was recently highlighted as one of the best matrixes for PDI-O. Finally, a one-dimensional second-order distributed feedback laser using PS doped with PDI-O was fabricated and characterized. This device has shown a threshold significantly lower (by around one order of magnitude) than that of a similar laser based on PDI-C6-doped PS.We thank support from the Spanish Government (MECC) and the European Community (FEDER) through grants MAT2008-06648-C02 and MAT-2011-28167-C02, as well as from the University of Alicante. MGR and MM are supported respectively by a CSIC fellowship within the program JAE and by MEC through a FPI fellowship

Thermal-nanoimprint lithography for perylenediimide-based distributed feedback laser fabrication

In the present work thermal-nanoimprint lithography of various commercial thermoplastic resists as matrixes for perylenediimides (PDIs) has been studied. This fabrication method reduces the number of fabrication steps, and therefore, the cost of the obtained distributed feedback (DFB) lasers. The optical properties of these devices are analyzed, aiming to optimize their performance.Spanish Government (MINECO) and the European Community (FEDER) through grants MAT2008-06648-C02 and MAT-2011-28167-C02. Manuel G. Ramírez is supported by a CSIC fellowship within the program JAE

Vanadium distribution, lipid peroxidation and oxidative stress markers upon decavanadate in vivo administration

The contribution of decameric vanadate species to vanadate toxic effects in cardiac muscle was studied following an intravenous administration of a decavanadate solution (1 mM total vanadium) in Sparus aurata. Although decameric vanadate is unstable in the assay medium, it decomposes with a half-life time of 16 allowing studying its effects not only in vitro but also in vivo. After 1, 6 and 12 h upon decavanadate administration the increase of vanadium in blood plasma, red blood cells and in cardiac mitochondria and cytosol is not affected in comparison to the administration of a metavanadate solution containing labile oxovanadates. Cardiac tissue lipid peroxidation increases up to 20%, 1, 6 and 12 h after metavanadate administration, whilst for decavanadate no effects were observed except 1 h after treatment (+20%). Metavanadate administration clearly differs from decavanadate by enhancing, 12 h after exposure, mitochondrial superoxide dismutase (SOD) activity (+115%) and not affecting catalase (CAT) activity whereas decavanadate increases SOD activity by 20% and decreases ( 55%) mitochondrial CAT activity. At early times of exposure, 1 and 6 h, the only effect observed upon decavanadate administration was the increase by 20% of SOD activity. In conclusion, decavanadate has a different response pattern of lipid peroxidation and oxidative stress markers, in spite of the same vanadium distribution in cardiac cells observed after decavanadate and metavanadate administration. It is suggested that once formed decameric vanadate species has a different reactivity than vanadate, thus, pointing out that the differential contribution of vanadium oligomers should be taken into account to rationalize in vivo vanadate toxicity

Two-dimensional distributed feedback lasers with thermally-nanoimprinted perylenediimide-containing films

Two-dimensional (2D) distributed feedback (DFB) lasers with gratings imprinted by thermal nanoimprint lithography on the active film are reported. They show thresholds for lasing of ∼10 kW/cm2, similar to the most efficient imprinted DFB lasers reported; and long operational lifetimes (under ambient conditions) of ∼12 × 104 pump pulses. The key for their successful operation has been the selection of a highly efficient and stable dye, perylene orange (PDI-O), and a proper matrix to host it, the fluoro-modified thermoplastic resist mr-I7030R, which has enabled 2D imprinting while preserving the dye optical properties. The use of the UV-curable resist SU8 as an alternative matrix for PDI-O to be imprinted by combined nanoimprint and photolithography was also investigated, and was concluded to be unsuccessful due to severe photoluminescence quenching. By replacing PDI-O with Rhodamine 6G, lasers with reasonable thresholds, but with significantly inferior operational lifetimes in comparison to PDI-O/mr-I7030R devices, were obtained.We thank support from the Spanish Government (MINECO) and the European Community (FEDER) through Grants MAT2011-28167-C02 and MAT2015-66586-R, as well as to the University of Alicante. M.M-V. has been partly supported by a MINECO FPI fellowship (no. BES-2009-020747) and by a Junta de Castilla y León grant (no. SA046U16)

REGIMEN DE REPARACION DE LOS DAÑOS EN LOS CONTRATOS DE CONSUMO

La presente investigación ha realizado un análisis  sobre; la reparación de los daños en los contratos de consumo, la evolución histórica del derecho del consumidor, los derechos de los consumidores, la reparación de daños y productos defectuosos, asimismo se estudió y analizo la normativa nacional correspondiente, tomando como referencia la legislación comparada; en relación a la fundamentación práctica que se ha obtenido en base a un trabajo de campo se ha obtenido resultados de la situación del problema que se ha planteado en el centro comercial Real Plaza de Chiclayo. El objetivo se centró en “Establecer un régimen de reparación de los daños en los contratos de consumo en el código de protección y defensa del consumidor”. Planteándose la siguiente hipótesis: “La comunidad Jurídica a través de planteamientos teóricos, sustentaron la existencia de empirismos normativos con relación a la aplicación de la Ley 29571“código de protección y defensa del consumidor”, por lo que se debió recurrir a la legislación comparada para solucionar el vacío advertido”. Siendo la metodología; descriptiva – explicativa. Llegando a la conclusión general “Se estableció un régimen de reparación de los daños en los contratos de consumo en el código de protección y defensa del consumidor, viéndose afectada por empirismos normativos y discrepancias teóricas, que estuvo relacionadas causalmente, y se explicaron, por el hecho de que existió vacíos legales en la Ley 29571, existiendo diferencias en los planteamientos teóricos, debiendo los operadores del derecho y la comunidad jurídica, recurrir a la legislación comparada de España, Argentina, Brasil, la cual fue utilizado como referencia para subsanar las deficiencias o vacíos advertidos”