Contributo para a melhoria do desempenho térmico das paredes de taipa

O uso da construção em terra remonta ao início da nossa civilização. Nas regiões do Alentejo e do Algarve existe ainda um grande número de edifícios com paredes em taipa, mas esta tecnologia tem vindo a cair em desuso desde meados do século passado. A construção em terra é altamente sustentável, já que a terra per si é um material 100% reutilizável e pode ser facilmente encontrado em quase todos os lugares do mundo. Os edifícios com paredes em taipa apresentam uma elevada inércia térmica o que, dadas as características climáticas de Portugal, beneficia o seu comportamento térmico. No entanto, seria desejável que a condutibilidade térmica da taipa fosse menor. As preocupações ambientais relativas ao consumo energético, associado ao conforto na habitação, e ao fabrico, transporte e aplicação dos materiais utilizados na construção, levou-nos a procurar novas soluções de tipologias construtivas em terra. Atendendo a estes aspetos e à melhoria da eficiência energética das habitações, neste trabalho são apresentados os resultados dos ensaios realizados em laboratório sobre novas soluções de construção em terra. O local selecionado para a recolha de amostras de terra foi Serpa. Foi feita a caracterização geotécnica do material terra e preparadas diversas composições com a incorporação de argila expandida e de regranulado de cortiça expandida. A argila expandida e o regranulado de cortiça expandida também foram escolhidos por serem isolantes térmicos produzidos a partir de matérias primas disponíveis nas regiões do Alentejo e do Algarve, regiões do nosso país com maior aptência para o uso da taipa. De maneira a caracterizar as diferentes composições sob o ponto de vista mecânico e do desempenho térmico, foram fabricados cubos com 10 cm de aresta e ensaiados de modo a se calcular a sua resistência à compressão e a sua condutibilidade térmica. Os resultados obtidos mostraram que a utilização deste tipo de tipologias construtivas em terra com a incorporação de argila expandida e de regranulado de cortiça expandida permite aumentar o seu desempenho, fazendo que seja possível adaptar esta tipologia às necessidades dos dias de hoje, nomeadamente às exigências estabelecidas pelo Regulamento das Características de Comportamento Térmico dos Edifícios (RCCTE). Os resultados desta investigação têm aplicabilidade, com as devidas adaptações, tanto em construções em taipa como em construções em adobe

Bounds on gamma from CP violation measurements in B -> pi+ pi- and B -> psi K_S

We study the determination of gamma from CP-violating observables in B -> pi+ pi- and B -> psi K_S. This determination requires theoretical input to one combination of hadronic parameters. We show that a mild assumption about this quantity may allow bounds to be placed on gamma, but we stress the pernicious effects that an eightfold discrete ambiguity has on such an analysis. The bounds are discussed as a function of the direct (C) and interference (S) CP-violating observables obtained from time-dependent B -> pi+ pi- decays, and their behavior in the presence of new physics effects in B-Bbar mixing is studied. (V2: Misprints corrected. Slightly improved discussion.)Comment: 11 pages, RevTex 4, 5 eps figures include

Mass-degenerate Higgs bosons at 125 GeV in the Two-Higgs-Doublet Model

The analysis of the Higgs boson data by the ATLAS and CMS Collaborations appears to exhibit an excess of h --> gamma\gamma events above the Standard Model (SM) expectations; whereas no significant excess is observed in h --> ZZ* --> {four lepton} events, albeit with large statistical uncertainty due to the small data sample. These results (assuming they persist with further data) could be explained by a pair of nearly mass-degenerate scalars, one of which is a SM-like Higgs boson and the other is a scalar with suppressed couplings to W+W- and ZZ. In the two Higgs doublet model, the observed \gamma\gamma and ZZ* --> {four lepton} data can be reproduced by an approximately degenerate CP-even (h) and CP-odd (A) Higgs boson for values of \sin(\beta-\alpha) near unity and 0.7 < \tan\beta < 1. An enhanced \gamma\gamma signal can also arise in cases where m_h ~ m_H, m_H ~ m_A, or m_h ~ m_H ~ m_A. Since the ZZ* --> {four lepton} signal derives primarily from a SM-like Higgs boson whereas the \gamma\gamma signal receives contributions from two (or more) nearly mass-degenerate states, one would expect a slightly different invariant mass peak in the ZZ* --> {four lepton} and \gamma\gamma channels. The phenomenological consequences of such models can be tested with additional Higgs data that will be collected at the LHC in the near future.Comment: 18 pages, 19 pdf figures, v2: references added, v3&v4: added refs and explanation

Influence of temperature on continuous high gravity brewing with yeasts immobilized on spent grains

Flavor compounds’ formation and fermentative parameters of continuous high gravity brewing with yeasts immobilized on spent grains were evaluated at three different temperatures (7, 10 and 15 °C). The assays were performed in a bubble column reactor at constant dilution rate (0.05 h−1) and total gas flow rate (240 ml/min of CO2 and 10 ml/min of air), with high-gravity all-malt wort (15°Plato). The results revealed that as the fermentation temperature was increased from 7 to 15 °C, the apparent and real degrees of fermentation, rate of extract consumption, ethanol volumetric productivity and consumption of free amino nitrogen (FAN) increased. In addition, beer produced at 15 °C presented a higher alcohols to esters ratio (2.2–2.4:1) similar to the optimum values described in the literature. It was thus concluded that primary high-gravity (15°Plato) all-malt wort fermentation by continuous process with yeasts immobilized on spent grains, can be carried out with a good performance at 15 °C.Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq).Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP).Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Development and test of an intra-vehicular network based on bluetooth low energy

This paper presents the development and test of an intra-vehicular system, based on Bluetooth Low Energy (BLE), designed to present to the driver, in real-time, information collected from multiple sensors distributed inside of the car, using an Android smartphone. The architecture of the implemented BLE network is composed by the smartphone, which has the role of central station, and two BLE modules (peripheral stations) based on the CC2540 system-on-chip, which collect relevant sensor information from the battery system and the traction system of an electric car. Results based on an experimental performance evaluation of the wireless network show that the network is able to satisfy the application requirements, as long as the network parameters are properly configured taking into account the peculiarities of the BLE data transfer modes and the limitations of the BLE platform.This work is supported by FCT with the reference project UID/EEA/04436/2013, by FEDER funds through the COMPETE 2020 – Programa Operacional Competitividade e Internacionalização (POCI) with the reference project POCI-01-0145-FEDER-006941.info:eu-repo/semantics/publishedVersio

NEW EQUATIONS TO DETERMINE EXERCISE INTENSITY USING DIFFERENT EXERCISE MODES

The purpose of this study was to determine new equations from the relationship of %·VO2max versus %HRmax, based on direct measures of oxygen uptake, in four exercise modes (leg cycling, rowing, stepping and running), in young adult females and males with low risk for cardiovascular disease. Ten adult males and ten females volunteered for the study. The participants performed an incremental test for each exercise mode until exhaustion. Regression analyses were carried out for each participant at a target % of VO2max and %HRmax was computed. At 40-90%·VO2max, the regression equations predicted similar values of %HRmax for males and females in the four exercise modes. In contrast, estimated %HRmax for cycling was higher at 40-70%·VO2max, when compared with stepping and running. The results support the notion that a single equation to predict target heart rate values for both males and females can be applied. Furthermore, at light and moderate intensities, leg cycling produces different %·VO2max-%HRmax regression equations than stepping and running

A mobilization regimen to prevent mandibular hypomobility in irradiated patients : an analysis and comparison of two techniques

Radiotherapy, when used in head and neck cancer treatment, can produce side effects in the patients, such as decreased salivary production, xerostomia, opportunistic infections, radiation caries, dysphagia, local discomfort and the limitation of mouth opening. The aim of this study was to evaluate the amplitude of mouth opening in patients before and immediately after the completion of radiotherapy, comparing the effectiveness of two physiotherapy exercises. The irradiated sites included the masticatory muscles. The results demonstrated that there were no statistically significant differences between the two instituted exercises; however there was a trend towards better clinical results in group 2. The amplitude of mouth opening showed a trend towards reduction, but this was not statistically significant. When the pterygoid and sternocleidomatoid muscles were included in the irriated field, patients were observed to have more morbidity. This indicates the great importance of these muscles in mouth opening. Based on the results obtained within this study, it is not possible to conclude that physiotherapy exercies are efficacious in preventing trismus. Future longitudinal studies are required to verify the onset of trismus in radiotherapy patients

Mobile laboratories as an alternative to conventional remote laboratories

Remote laboratories have been playing an important role on the improvement of flexibility and the extent of practical activities in teaching and learning activities in engineering and technology. However, the current remote laboratories model does not consider dynamic scenarios including collaboration, peer-to-peer labs and mobile labs. This paper presents a set of tools for creating collaborative online mobile laboratories that allow students to develop their own labs and share them with classmates and teachers. The approach used is compatible with the machine and network configurations that the target user has in schools and at home, and provides the retrieval of information for learning evaluation.info:eu-repo/semantics/publishedVersio