382 research outputs found
Cultivation of the microalga, Chlorella pyrenoidosa, in biogas wastewater
Biogas wastewater is always a problem as a result of its extremely high concentrations of nitrogen and phosphorus, which is the main reason for the eutrophication of the surrounding water. The microalga, Chlorella pyrenoidosa, can utilize the nitrogen and phosphorus in wastewater for its growth. Therefore, the microalga was introduced to be cultivated in the biogas wastewater, which could not only bioremediate the wastewater, but also produce plenty of the microalga biomass that could be used for the exploitation of fertilizers, feed additives and biofuels. This study showed that the microalga, C. pyrenoidosa could grow well in the biogas wastewater under optimal condition: initial cell density of 0.15 (OD680), pH 8 and illumination intensity of 10000 LX. Under the optimal condition, the dry cell weight of the microalgae reached 0.1 g/L after cultivation in the wastewater for fourteen (14) days; in the meantime, the microalga also removed 71.8% of phosphorus, 100% of ammoniacal nitrogen (NH4+-N), 52.8% of nitrate nitrogen (NO3-N) and 23.0% of nitrite nitrogen (NO2-N) from the biogas wastewater, suggesting that the cultivation of C. pyrenoidosa in biogas wastewater would be efficient for the treatment of wastewater. This study also provided a low-cost way to produce the microalga and its relevant products.Key words: Chlorella pyrenoidosa, biogas wastewater, cultivation, phosphorus, nitrogen
Effect of Hydrothermal Treatment Temperature on the Properties of Sewage Sludge Derived Solid Fuel
High moisture content along with poor dewaterability are the main challenges for sewage sludge treatment and utilization. In this study, the effect of hydrothermal treatment at various temperature (120-200 ˚C) on the properties of sewage sludge derived solid fuel was investigated in the terms of mechanical dewatering character, drying character, calorific value and heavy metal distribution. Hydrothermal treatment (HT) followed by dewatering process significantly reduced moisture content and improved calorific value of sewage sludge with the optimum condition obtained at 140˚C. No significant alteration of drying characteristic was produced by HT. Heavy metal enrichment in solid particle was found after HT that highlighted the importance of further study regarding heavy metal behavior during combustion. However, it also implied the potential application of HT on sewage sludge for heavy metal removal from wastewater
Higher-order multipole amplitude measurement in
Using events collected with the BESIII detector at
the BEPCII storage ring, the higher-order multipole amplitudes in the radiative
transition are measured.
A fit to the production and decay angular distributions yields
and , where the first
errors are statistical and the second systematic. Here denotes the
normalized magnetic quadrupole amplitude and the normalized electric
octupole amplitude. This measurement shows evidence for the existence of the
signal with statistical significance and is consistent with
the charm quark having no anomalous magnetic moment.Comment: 14 pages, 4 figure
Precision measurement of the branching fractions of J/psi -> pi+pi-pi0 and psi' -> pi+pi-pi0
We study the decays of the J/psi and psi' mesons to pi+pi-pi0 using data
samples at both resonances collected with the BES III detector in 2009. We
measure the corresponding branching fractions with unprecedented precision and
provide mass spectra and Dalitz plots. The branching fraction for J/psi ->
pi+pi-pi0 is determined to be (2.137 +- 0.004 (stat.) +0.058-0.056 (syst.)
+0.027-0.026 (norm.))*10-2, and the branching fraction for psi' -> pi+pi-pi0 is
measured as (2.14 +- 0.03 (stat.) +0.08-0.07 (syst.) +0.09-0.08 (norm.))*10-4.
The J/psi decay is found to be dominated by an intermediate rho(770) state,
whereas the psi' decay is dominated by di-pion masses around 2.2 GeV/c2,
leading to strikingly different Dalitz distributions.Comment: 15 pages, 2 figure
Search for C-parity violation in and
Using events recorded in
collisions at 3.686 GeV with the BESIII at the BEPCII collider, we
present searches for C-parity violation in and decays via . No significant
signals are observed in either channel. Upper limits on the branching fractions
are set to be and
at the 90\%
confidence level. The former is one order of magnitude more stringent than the
previous upper limit, and the latter represents the first limit on this decay
channel.Comment: 7 pages, 2 figure
An amplitude analysis of the system produced in radiative decays
An amplitude analysis of the system produced in radiative
decays is presented. In particular, a piecewise function that
describes the dynamics of the system is determined as a
function of from an analysis of the
decays collected by the BESIII detector.
The goal of this analysis is to provide a description of the scalar and tensor
components of the system while making minimal assumptions about
the properties or number of poles in the amplitude. Such a model-independent
description allows one to integrate these results with other related results
from complementary reactions in the development of phenomenological models,
which can then be used to directly fit experimental data to obtain parameters
of interest. The branching fraction of is
determined to be , where the uncertainty is
systematic only and the statistical uncertainty is negligible.Comment: Submitted to Phys. Rev. D 19 pages, 4 figure
Measurement of the leptonic decay width of using initial state radiation
Using a data set of 2.93 fb taken at a center-of-mass energy of
= 3.773 GeV with the BESIII detector at the BEPCII collider, we
measure the process and determine the product of the branching fraction and the
electronic width ~eV. Using the earlier-published BESIII result for
= (5.973 0.007 0.037)\%, we derive the electronic width ~= (5.58
0.05 0.08) keV.Comment: 8 pages, 2 figure
Measurement of the branching fractions of and in
We study decays to final states involving the with a
482pb data sample collected at = 4.009GeV with the
\mbox{BESIII} detector at the BEPCII collider. We measure the branching
fractions = (8.81.80.5)
and = ()
where the first uncertainty is statistical and the second is systematic. In
addition, we estimate an upper limit on the non-resonant branching ratio
at the 90
confidence level. Our results are consistent with CLEO's recent measurements
and help to resolve the disagreement between the theoretical prediction and
CLEO's previous measurement of
Measurement of the Matrix Elements for the Decays and
Based on a sample of events collected with the
BESIII detector at the BEPCII collider, Dalitz plot analyses of selected 79,625
events, 33,908
events and 1,888
events are performed. The measured
matrix elements of are in reasonable agreement
with previous measurements. The Dalitz plot slope parameters of
and
are determined to be and , respectively, where the first uncertainties are statistical and the
second systematic. Both values are consistent with previous measurements, while
the precision of the latter one is improved by a factor of three. Final state
interactions are found to have an important role in those decays.Comment: 12 pages, 7 figure
Observation of the state in at BESIII
We report the observation of the in the process with a statistical
significance of , in data samples at center-of-mass energies
4.230, 4.260, 4.360, 4.420 and 4.600~GeV collected with the BESIII
detector at the BEPCII electron positron collider. The measured mass of the
is ~MeV/, where the first error is
statistical and the second systematic, and the width is less than ~MeV at
the 90\% confidence level. The products of the Born cross sections for
and the branching ratio are also measured. These measurements are in good
agreement with the assignment of the as the charmonium
state.Comment: 7 pages, 3 figures, version to appear in Phys. Rev. Let
- …