Homeoprotein Hbx4 represses adhesion molecule governing cytokinesis and development

Homeobox genes encode proteins with a highly conserved DNA-binding motif and provoke morphological diversification of body segments by differentially controlling the expression of downstream targets. Here, we have identified _hbx4_, one of many homeobox genes in _Dictyostelium discoideum_ and investigated its role during growth and development. In suspension, Hbx4-overexpressing cells, Hbx4^OE^, showed defects in cytokinesis and growth rate. During development, Hbx4^OE^ and _hbx4_-disrupting cells, _hbx4¯_ made differences in shape of mound and slug, cell-type proportioning from wild type KAx3 cells. These phenotypes were similar to those of mutant defective in _cadA_ encoding Ca^2+^-dependent cell adhesion molecule so that we investigated the relationship between _hbx4_ and _cadA_. Overexpression of Hbx4 inhibited the expression of _cadA_ and cAMP also failed to stimulate _cadA_ in Hbx4^OE^. Furthermore, gel mobility shift assay showed the promoter of _cadA_ contained Hbx4-binding site, indicating Hbx4 negatively regulates the expression of _cadA_. Proteome analysis revealed that overexpression of Hbx4 repressed the _rdiA_ and _abpB_ encoding rho guanine nucleotide dissociation inhibitor1, RhoGDI1 and actin bundling protein 34, ABP34, respectively. And the overexpression of _cadA_ in Hbx4^OE^ cells rescued the defects and increased mRNA level of _rdiA_, _abpB_ and one of Rho GTPase, _rac1b_. These results suggested that Hbx4 can modulate cytokinesis, cell sorting and cell-type proportioning by repressing _cadA_ that regulates GTPase-dependent signaling pathway

REX-1 Expression and p38 MAPK Activation Status Can Determine Proliferation/Differentiation Fates in Human Mesenchymal Stem Cells

BACKGROUND: REX1/ZFP42 is a well-known embryonic stem cell (ESC) marker. However, the role of REX1, itself, is relatively unknown because the function of REX1 has only been reported in the differentiation of ESCs via STAT signaling pathways. Human mesenchymal stem cells (hMSCs) isolated from young tissues and cancer cells express REX1. METHODOLOGY/PRINCIPAL FINDING: Human umbilical cord blood-derived MSCs (hUCB-MSCs) and adipose tissue-derived MSCs (hAD-MSCs) strongly express REX1 and have a lower activation status of p38 MAPK, but bone marrow-derived MSCs (hBM-MSCs) have weak REX1 expression and higher activation of p38 MAPK. These results indicated that REX1 expression in hMSCs was positively correlated with proliferation rates but inversely correlated with the phosphorylation of p38 MAPK. In hUCB-MSCs, the roles of REX1 and p38 MAPK were investigated, and a knockdown study was performed using a lentiviral vector-based small hairpin RNA (shRNA). After REX1 knockdown, decreased cell proliferation was observed. In REX1 knocked-down hUCB-MSCs, the osteogenic differentiation ability deteriorated, but the adipogenic potential increased or was similar to that observed in the controls. The phosphorylation of p38 MAPK in hUCB-MSCs significantly increased after REX1 knockdown. After p38 MAPK inhibitor treatment, the cell growth in REX1 knocked-down hUCB-MSCs almost recovered, and the suppressed expression levels of CDK2 and CCND1 were also restored. The expression of MKK3, an upstream regulator of p38 MAPK, significantly increased in REX1 knocked-down hUCB-MSCs. The direct binding of REX1 to the MKK3 gene was confirmed by a chromatin immunoprecipitation (ChIP) assay. CONCLUSIONS/SIGNIFICANCE: These findings showed that REX1 regulates the proliferation/differentiation of hMSCs through the suppression of p38 MAPK signaling via the direct suppression of MKK3. Therefore, p38 MAPK and REX-1 status can determine the cell fate of adult stem cells (ASCs). These results were the first to show the role of REX1 in the proliferation/differentiation of ASCs

Methano­ldinitrato[N-(2-pyridylmethyl­ene)aniline]copper(II)

The Cu atom in the title compound, [Cu(NO3)2(C12H10N2)(CH3OH)], adopts a square-pyramidal geometry, being ligated by two N atoms of the bidentate N-(2-pyridylmethyl­ene)­aniline (ppma) ligand, two O atoms of NO3 ligands and one O atom of a methanol molecule, which occupies the apical position. The phenyl ring on the ppma ligand is twisted out of the pyridine plane, forming a dihedral angle of 42.9 (1)°. In the crystal, inter­molecular O—H⋯O hydrogen bonds between methanol and NO3 ligands form an extensive one-dimensional network extending parallel to [100]

Unilateral massive hydrothorax in a gynecologic patient with pseudo-Meigs' syndrome -A case report-

Pseudo-Meigs' syndrome is characterized by the presence of a benign ovarian tumor associated with ascites and a right-sided hydrothorax. The major problem associated with pseudo-Meigs' syndrome is the respiratory distress caused by a giant mass in the peritoneal space, massive ascites and pleural effusion. Even if there are no respiratory problems prior to surgery, potential respiratory dysfunction can occur during the peri-anesthetic period, leading to hypoxia, hypercapnea and respiratory acidosis. We report a case of hypoxia during recovery from anesthesia in a gynecological patient with pseudo-Meigs' syndrome

Effect of rhBMP-2 applied with a 3D-printed titanium implant on new bone formation in rabbit calvarium

Objective: This study sought to compare the biocompatibility of a three-dimensional (3D)-printed titanium implant with a conventional machined titanium product, as well as the effect of such implant applied with recombinant human Bone Morphogenetic Protein Type 2 (rhBMP-2) for guided bone regeneration. Methodology: Disk-shaped titanium specimens fabricated either by the conventional machining technique or by the 3D-printing technique were compared by MC3T3-E1 cells cytotoxicity assay. New bone formation was evaluated using a rapid prototype titanium cap applied to the calvaria of 10 rabbits, which were divided into two groups: one including an atelopeptide collagen plug on one side of the cap (group I) and the other including a plug with rhBMP-2 on the other side (group II). At six and 12 weeks after euthanasia, rabbits calvaria underwent morphometric analysis through radiological and histological examination. Results: Through the cytotoxicity assay, we identified a significantly higher number of MC3T3-E1 cells in the 3D-printed specimen when compared to the machined specimen after 48 hours of culture. Moreover, morphometric analysis indicated significantly greater bone formation at week 12 on the side where rhBMP-2 was applied when evaluating the upper portion immediately below the ca p. Conclusion: The results suggest that 3D-printed titanium implant applied with rhBMP-2 enables new bone formation

Transient flow analysis in a Roots blower: Experimental and numerical investigations

It is widely acknowledged that rotary positive displacement machines exhibit highly unsteady flow fields that affect their performance. The presence of the operational clearances impacts this unsteady flow field and further affects the performance. However, the exact nature of these unsteady flow mechanisms remains largely unknown that necessitates both detailed experimental investigations and computational modelling. Thus, the present study employs both optical visualization and unsteady Reynolds-Averaged Navier Stokes (URANS) computational modelling methods while focussing on investigating the transient flow field inside a Roots blower, a general type of the rotary positive displacement machine. Straight lobes in a Roots blower provide convenient optical access to experimentally analyse internal flow and compare it with the predictions obtained by standard computational models. In the first part of this paper, this study covers the low-speed experimental investigations using i) High-Speed Camera (HC), ii) the continuous High-Speed Particle Image Velocimetry (CPIV) and, iii) the instantaneous PIV (IPIV) obtained with a double pulse laser and a double shutter camera. Relative merits from these techniques are discussed with respect to the Roots blower unsteady flow mechanisms. In addition, computational analyses are performed using a combination of in-house and commercial modelling methods and the results are compared against the experiments. The results confirm the existence of highly three-dimensional and unsteady flow field where certain distinct flow mechanisms originating from the operational clearances impact the performance of the Roots blower. The study also highlights challenges of the experimental and computational methods used for evaluation of positive displacement machines that impact the accuracy of results

Federated Learning with Diffusion Models for Privacy-Sensitive Vision Tasks

Diffusion models have shown great potential for vision-related tasks, particularly for image generation. However, their training is typically conducted in a centralized manner, relying on data collected from publicly available sources. This approach may not be feasible or practical in many domains, such as the medical field, which involves privacy concerns over data collection. Despite the challenges associated with privacy-sensitive data, such domains could still benefit from valuable vision services provided by diffusion models. Federated learning (FL) plays a crucial role in enabling decentralized model training without compromising data privacy. Instead of collecting data, an FL system gathers model parameters, effectively safeguarding the private data of different parties involved. This makes FL systems vital for managing decentralized learning tasks, especially in scenarios where privacy-sensitive data is distributed across a network of clients. Nonetheless, FL presents its own set of challenges due to its distributed nature and privacy-preserving properties. Therefore, in this study, we explore the FL strategy to train diffusion models, paving the way for the development of federated diffusion models. We conduct experiments on various FL scenarios, and our findings demonstrate that federated diffusion models have great potential to deliver vision services to privacy-sensitive domains

Extracting elastic-plastic properties from experimental loading-unloading indentation curves using different optimization techniques

This work is focused on the determination of elastic-plastic material properties from indentation loading-unloading curves using optimisation techniques and experimental data from instrumented indentation tests. Three different numerical optimisation methods (namely, FE analysis, dimensional mathematical functions and simplified mathematical equations approaches) have been used to determine three material properties; Young's modulus, yield stress and work-hardening exponent. The predictions of the material properties from the three approaches have been validated against the values obtained from uniaxial tensile tests and compared to the experimental loading-unloading curves. In general, the elastic-plastic material properties predicted from these three proposed optimisation methods estimate the Young's modulus to within 6% and the yield stress and work-hardening exponent to within 12%, compared to the values obtained from the uniaxial tensile tests