Skin layer recovery of free-surface wakes: Relationship to surface renewal and dependence on heat flux and background turbulence

The thermal signatures of free-surface wakes observed in the open ocean show that the recovery of the cool skin layer is related to the degree of surface mixing and to ambient environmental conditions. Wakes produced by two surface-piercing cables of O(10−2 m) in diameter are analyzed using infrared imagery. Under low-wind-speed conditions when the swell and surface current were aligned, the wakes exhibited distinctive patchlike features of O(1 m) in diameter that were generated by the passage of individual waves. The time t* required by the skin layer to recover from these disturbances is compared to the surface-renewal timescale τ used in heat and gas flux models. At low wind speeds, t* is comparable to τ, but at moderate wind speeds the agreement is poor. The spatial and temporal variations in the skin temperature of these wakes are related to a wave Reynolds number used to characterize the strength of the disturbance due to the waves. The recovery process is characterized in terms of the restoring internal energy flux Jr which is proportional to both the initial thickness and the thermal recovery rate of the skin layer and was found to be directly related to the strength of the surface disruption. Comparison of the wake results with laboratory and other field measurements of breaking waves implies that Jr is also a strong function of the net heat flux and background turbulence, which relate directly to the existing environmental conditions such as wind stress and sea state. Our results demonstrate that Jr may vary by several orders of magnitude, depending on the environmental conditions

Microscale wave breaking and air-water gas transfer

Laboratory results showing that the air-water gas transfer velocity k is correlated with mean square wave slope have been cited as evidence that a wave-related mechanism regulates k at low to moderate wind speeds [Jähne et al., 1987; Bock et al., 1999]. Csanady [1990] has modeled the effect of microscale wave breaking on air-water gas transfer with the result that k is proportional to the fractional surface area covered by surface renewal generated during the breaking process. In this report we investigate the role of microscale wave breaking in gas transfer by determining the correlation between k and AB, the fractional area coverage of microscale breaking waves. Simultaneous, colocated infrared (IR) and wave slope imagery is used to verify that AB detected using IR techniques corresponds to the fraction of surface area covered by surface renewal in the wakes of microscale breaking waves. Using measurements of k and AB made at the University of Washington wind-wave tank at wind speeds from 4.6 to 10.7 m s−1, we show that k is linearly correlated with AB, regardless of the presence of surfactants. This result is consistent with Csanady's [1990] model and implies that microscale wave breaking is likely a fundamental physical mechanism contributing to gas transfer

Vertical Boil Propagation from a Submerged Estuarine Sill

Surface disruptions by boils during strong tidal flows over a rocky sill were observed in thermal infrared imagery collected at the Snohomish River estuary in Washington State. Locations of boil disruptions and boil diameters at the surface were quantified and are used to test an idealized model of vertical boil propagation. The model is developed as a two-dimensional approximation of a three-dimensional vortex loop, and boil vorticity is derived from the flow shear over the sill. Predictions of boil disruption locations were determined from the modeled vertical velocity, the sill depth, and the over-sill velocity. Predictions by the vertical velocity model agree well with measured locations (rms difference 3.0 m) and improve by using measured velocity and shear (rms difference 1.8 m). In comparison, a boil-surfacing model derived from laboratory turbulent mixed-layer wakes agrees with the measurements only when stratification is insignificant

Turbulent Kinetic Energy and Coherent Structures in a Tidal River

We investigate the relationship between turbulence statistics and coherent structures (CS) in an unstratified reach of the Snohomish River estuary using in situ velocity measurements and surface infrared (IR) imaging. Sequential IR images are used to estimate surface flow characteristics via a particle-image-velocimetry (PIV) technique, and are conditionally sampled to delineate the surface statistics of bottom-generated CS, or boils. In the water column, we find that turbulent kinetic energy (TKE) production exceeds dissipation near the bed but is less than dissipation in the midwater column and that TKE flux divergence closes a significant portion of the measured imbalance. The surface boundary leads to divergence in upwelling CS, and leads to the redistribution of vertical TKE to the horizontal. Very near the surface, statistical anisotropy is observed at length scales larger than the depth H (3–5 m), while boil-scale motions of O(1)m are nearly isotropic and exhibit a 25/3 turbulent cascade to smaller scales. Conditional sampling suggests that TKE dissipation in boils is approximately 2 times greater on average than dissipation in ambient flow. Similarly, surface boils are marked by significantly greater velocity variance, upwelling, divergence, and TKE flux divergence than ambient flow regions. Coherent structures and their surface manifestation, therefore, play an important role in the vertical transport of TKE and the water column distribution of dissipation, and are an important component of the TKE budget

Defining and quantifying microscale wave breaking with infrared imagery

Breaking without air entrainment of very short wind-forced waves, or microscale wave breaking, is undoubtedly widespread over the oceans and may prove to be a significant mechanism for enhancing the transfer of heat and gas across the air-sea interface. However, quantifying the effects of microscale wave breaking has been difficult because the phenomenon lacks the visible manifestation of whitecapping. In this brief report we present limited but promising laboratory measurements which show that microscale wave breaking associated with evolving wind waves disturbs the thermal boundary layer at the air-water interface, producing signatures that can be detected with infrared imagery. Simultaneous video and infrared observations show that the infrared signature itself may serve as a practical means of defining and characterizing the microscale breaking process. The infrared imagery is used to quantify microscale breaking waves in terms of the frequency of occurrence and the areal coverage, which is substantial under the moderate wind speed conditions investigated. The results imply that ”bursting“ phenomena observed beneath laboratory wind waves are likely produced by microscale breaking waves but that not all microscale breaking waves produce bursts. Oceanic measurements show the ability to quantify microscale wave breaking in the field. Our results demonstrate that infrared techniques can provide the information necessary to quantify the breaking process for inclusion in models of air-sea heat and gas fluxes, as well as unprecedented details on the origin and evolution of microscale wave breaking

Sea surface temperature signatures of oceanic internal waves in low winds

Author Posting. © American Geophysical Union, 2007. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Journal of Geophysical Research 112 (2007): C06014, doi:10.1029/2006JC003947.In aerial surveys conducted during the Tropical Ocean–Global Atmosphere Coupled Ocean-Atmosphere Response Experiment and the low-wind component of the Coupled Boundary Layer Air-Sea Transfer (CBLAST-Low) oceanographic field programs, sea surface temperature (SST) variability at relatively short spatial scales (O(50 m) to O(1 km)) was observed to increase with decreasing wind speed. A unique set of coincident surface and subsurface oceanic temperature measurements from CBLAST-Low is used to investigate the subsurface expression of this spatially organized SST variability, and the SST variability is linked to internal waves. The data are used to test two previously hypothesized mechanisms for SST signatures of oceanic internal waves: a modulation of the cool-skin effect and a modulation of vertical mixing within the diurnal warm layer. Under conditions of weak winds and strong insolation (which favor formation of a diurnal warm layer), the data reveal a link between the spatially periodic SST fluctuations and subsurface temperature and velocity fluctuations associated with oceanic internal waves, suggesting that some mechanism involving the diurnal warm layer is responsible for the observed signal. Internal-wave signals in skin temperature very closely resemble temperature signals measured at a depth of about 20 cm, indicating that the observed internal-wave SST signal is not a result of modulation of the cool-skin effect. Numerical experiments using a one-dimensional upper ocean model support the notion that internal-wave heaving of the warm-layer base can produce alternating bands of relatively warm and cool SST through the combined effects of surface heating and modulation of wind-driven vertical shear.We gratefully acknowledge funding for this research from the Office of Naval Research through the CBLAST Departmental Research Initiative (grants N00014-01-1-0029, N00014-05-10090, N00014-01-1-0081, N00014-04-1-0110, N00014-05-1-0036, N00014-01-1-0080) and the Secretary of the Navy/Chief of Naval Operations Chair (grant N00014-99-1-0090)

Evidence for complete and partial surface renewal at an air-water interface

A wind-wave flume is used to determine the extent to which the thermal boundary layer (TBL) at a wind-forced air-water interface is completely renewed from below. We measure skin temperature, Tskin, radiometrically, temperature immediately below the TBL, Tsubskin, using a temperature profiler, and net heat flux using the gradient flux technique. The Tskin probability density function, p(Tskin), and surface renewal time scale, τ, were measured using passive and active infrared imaging techniques, respectively. We find that the mean percentile rank of Tsubskin in p(Tskin) is 99.90, implying that complete surface renewal occurs. This result suggests an alternative to radiometric measurement of Tskin through the simple combination of an infrared camera and an in situ temperature sensor. Comparison of the temperature difference across the TBL to the expected cooling implies that a significant portion of events only partially renew the TBL. This result should impact efforts to improve air-sea transfer models

Statistics of surface divergence and their relation to air-water gas transfer velocity

Air-sea gas fluxes are generally defined in terms of the air/water concentration difference of the gas and the gas transfer velocity,kL. Because it is difficult to measure kLin the ocean, it is often parameterized using more easily measured physical properties. Surface divergence theory suggests that infrared (IR) images of the water surface, which contain information concerning the movement of water very near the air-water interface, might be used to estimatekL. Therefore, a series of experiments testing whether IR imagery could provide a convenient means for estimating the surface divergence applicable to air-sea exchange were conducted in a synthetic jet array tank embedded in a wind tunnel. Gas transfer velocities were measured as a function of wind stress and mechanically generated turbulence; laser-induced fluorescence was used to measure the concentration of carbon dioxide in the top 300 μm of the water surface; IR imagery was used to measure the spatial and temporal distribution of the aqueous skin temperature; and particle image velocimetry was used to measure turbulence at a depth of 1 cm below the air-water interface. It is shown that an estimate of the surface divergence for both wind-shear driven turbulence and mechanically generated turbulence can be derived from the surface skin temperature. The estimates derived from the IR images are compared to velocity field divergences measured by the PIV and to independent estimates of the divergence made using the laser-induced fluorescence data. Divergence is shown to scale withkLvalues measured using gaseous tracers as predicted by conceptual models for both wind-driven and mechanically generated turbulence

Induction of carcinoembryonic antigen expression in a three-dimensional culture system

MIP-101 is a poorly differentiated human colon carcinoma cell line established from ascites that produces minimal amounts of carcinoembryonic antigen (CEA), a 180 kDa glycoprotein tumor marker, and nonspecific cross-reacting antigen (NCA), a related protein that has 50 and 90 kDa isoforms, in vitro in monolayer culture. MIP-101 produces CEA when implanted into the peritoneum of nude mice but not when implanted into subcutaneous tissue. We tested whether MIP-101 cells may be induced to express CEA when cultured on microcarrier beads in three-dimensional cultures, either in static cultures as non-adherent aggregates or under dynamic conditions in a NASA-designed low shear stress bioreactor. MIP- 101 cells proliferated well under all three conditions and increased CEA and NCA production 3 - 4 fold when grown in three-dimensional cultures compared to MIP-101 cells growing logarithmically in monolayers. These results suggest that three-dimensional growth in vitro simulates tumor function in vivo and that three-dimensional growth by itself may enhance production of molecules that are associated with the metastatic process