Reforestation in Poland: History, Current Practice and Future Perspectives

In the past, the entire region of Poland was overgrown by forests. Due to economic changes, the forest cover was reduced to 40% in the 18th century and 21% after the Second World War. After the war, Polish foresters undertook considerable efforts to increase the forest cover to 30.8% by 2015. Polish forests are characterized by the dominance of oligo- and mesotrophic coniferous species (68.7%). This include the pioneer species, Scots pine. It covers approximately 60% of the area. The species composition of Polish forests determined the dominance of artificial regenerations. However, the currently prevailing direction of forest culture is natural regeneration. This tendency is related to “greening†of the forest management, the priority of durability over productivity and culture of multifunctional forests. A natural or seminatural direction of forest culture is being promoted. Renewal of the species such as fir, beech, oak, or spruce from the last stages of succession have always taken place in a natural manner, whereas the statistics are generated by the dominant species preferring open areas during renewal. Currently, the scale of natural regenerations of the pine is increasing. It is increasingly common to value the favorable economic aspect of natural renewal of the species, and the experience of practitioners supported by scientific research increase the likelihood for success. In Poland, the majority of methods of regeneration proceedings (forest cutting) and the law are directed at obtaining and promoting natural renewal. Independent of the concept of natural renewal promotion, the location of Poland in the intermediate climate zone, between the influence of oceanic and continental climates, resulted in the formation of valuable tree stands with high flexibility and tolerance to growth conditions. They are divided into seed stands, excluded stands, and timberlands. Thus, Poland is in possession of a great base for seed collection. At the beginning of 1990s, a rapid need for container seedlings occurred due to numerous disasters (wind-broken trees, gradations). Currently, in Poland, 17 field nurseries are in operation producing 1–10 m seedlings. In 1992, Poland received a loan from the World Bank to conduct afforestations and the “National Program for Increasing the Forest Cover†was started. The main objective of the plan is to increase the forest cover to 30% in 2020 and 33% in 2050. Within the program, it is planned to include vegetation of the natural succession in the area of approximately 80,000 ha

Long-term growth performance and productivity of Scots pine (Pinus sylvestris L.) populations

The phenotypic differentiation of 16 provenances of Scots pine originating from a wide variety of habitats that range from lowland to southern highland locations in Poland was assessed during 47 years of their growth and development in the Carpathian Mountains. The traits, including height, diameter at breast height, stem straightness, and crown width, were used to evaluate the differentiation of the provenances in their juvenile period and at maturity and were examined for patterns of local adaptation. The populations from northern Poland were characterized by the best growth and productivity, whereas provenances from central Poland had the best stem quality. There were some changes in growth between provenances observed during the experiment, but the stand volume (m3/ha) in juvenile trees was closely correlated with that in mature trees (r = 0.979). There was a positive relationship between the productivity and the environmental conditions of the geographical origin of provenances with increasing values for the trees’ productivity from south to north. Additionally, the elevation above sea level of the original populations was inversely correlated with the growth achieved by the progeny. In general, most populations from the species distribution range in Poland tested in the severe climate conditions of the Carpathian Mountains showed good growth performance under that environment, characterized by low temperatures and short growing periods. Provenances from climatic zones outside mountain regions demonstrated great growth and productivity, which proved to be the most important for competitively outperforming the local populations. Our study demonstrates good adaptive potential of the tested provenances, as selection will favor fast-growing genotypes under the predicted environmental change scenario

Phenotypic differentiation and genetic background variation of Polish provenances of Pinus sylvestris L.

We looked at the patterns of differentiation at a set of phenotypic traits of Scots pine populations derived from different environmental conditions of the species distribution range in Poland. The growth traits were tested over 47 years at the provenance trial experiment in the Carpathians. The phenotypic differentiation of the populations was compared to diversity estimates at a set of ten nuclear microsatellite markers. Scots pine populations were highly differentiated concerning diameter at breast high, stand volume, stem straightness and crown width according to the prove− nance and climatic zones. At the same time a low genetic diversity for microsatellite markers and no evidence of population structure was found among proveniences. Local populations from the Carpathian Mountains had lower genetic variation and weaker growth compared to lowland provenances. Among the tested populations Scots pine from lowlands were characterized by the great growth potential and good adaptation to the severe climate of the Carpathians. Populations that showed high quantitative traits differentiation were genetically homogenous at the neutral loci. The results indicate that there are some regions in the genome under selection that drive species adaptive variation

Climate-smart silviculture in mountain regions

Mountain forests in Europe have to face recently speeding-up phenomena related to climate change, refected not only by the increases in the mean global temperature but also by frequent extreme events, that can cause a lot of various damages threatening forest stability. The crucial task of management is to adapt forests to environmental uncertainties using various strategies that should be undertaken to enhance forest resistance and resilience, as well as to maintain forest biodiversity and provision of ecosystem services at requested levels. Forests can play an important role in the mitigation of climate change. The stand features that increase forest climate smartness could be improved by applying appropriate silvicultural measures, which are powerful tools to modify forests. The chapter provides information on the importance of selected stand features in the face of climate change and silvicultural prescriptions on stand level focusing to achieve the required level of climate smartness. The selection of silvicultural prescriptions should be also supported by the application of simulation models. The sets of the various treatments and management alternatives should be an inherent part of adaptive forest management that is a leading approach in changing environmental conditions

Simulating the effects of thinning and species mixing on stands of oak (Quercus petraea (Matt.) Liebl./Quercus robur L.) and pine (Pinus sylvestris L.) across Europe

Tree species mixing of oak (Quercus petraea (Matt.) Liebl./Quercus robur L.) and pine (Pinus sylvestris L.) has been shown to have positive effects on ecosystem service provision. From a management perspective, however, it is still uncertain which thinning regime provides the highest possible productivity of mixed oak–pine forests in the long term. Because of a lack of empirical studies dealing with thinning and species mixing effects on oak–pine forests, we simulated forest growth in order to test which thinning type and intensity may provide the highest productivity in the long-term. To achieve this, we simulated the growth of pure and mixed stands of oak and pine for 100 years in 23 triplets located on an ecological gradient across Europe. For this purpose, we applied four different growth simulators and compared their results: the distance-independent single-tree simulator PROGNAUS, the distance-dependent single-tree simulator SILVA, the gap model ForCEEPS, and the process-based simulator 3D-CMCC-FEM. We investigated the effects of species mixing and thinning from the upper (thinning from above) and lower tail (thinning from below) of the diameter distribution by reducing the stand basal area to 50 and 80% of the maximum basal area. We compared simulated results of the relative volume productivity of mixed versus pure stands and of thinned versus unthinned stands to empirical results previously obtained on the same set of triplets. Simulated relative volume productivity ranged between 61 and 156%, although extremes of 10% and of 300% could be observed. We found the relative volume productivity to be influenced by stand age, but not by stand density, except for PROGNAUS. Relative volume productivity did not increase with the site water supply of the triplet location. Highest long-term productivity for oak, pine and oak–pine stands can be expected in consequence of thinning from above, but the effect of thinning intensity differed between simulators. Thinning effects were positively affected by stand density, but not by stand age, except for thinning from above predicted by PROGNAUS. Predicted thinning effects showed good approximation of results from thinning experiments for oak, but not for pine stands. We hypothesize the results might be caused by the insufficient simulator representation of climate and its interaction with other site variables and stand structure. Further work is needed to reduce the revealed limitations of the existing growth models, as we currently see no alternative to such kind of studies and simulators

Temperature effect on size distributions in spruce-fir-beech mixed stands across Europe

Forest composed of Picea abies L., Abies alba Mill. and Fagus sylvatica L. cover a large area in the European mountain regions and have a high ecological and socio-economic importance as they supply many ecosystems services. Because of climate change, these forests are exposed to warming, and this effect increases with elevation, which may impact their delivery of goods and services. Previous studies did not find significant changes in the overall productivity of these species over the last 30 years, but they observed changes in species competitiveness at the species and tree levels. In this study, we aimed to link previous results on tree, species and stand level growth in spruce-fir-beech mixed mountain forests by analysing species size distribution dynamics under different climate conditions and their effect on stand growth. We developed a matrix model based on data from 76 long-term experimental plots distributed throughout Europe. We used the change in stand basal area to explore whether temperature modifies species size dominances and proportions, whether the temperature effects on changes in species basal area depend on species size dominance, and whether the effect of species size dominance on changes in the stand basal area varies with temperature. Our results showed that annual mean temperature is an important climatic driver of species dynamics in spruce-fir-beech mixed mountain forests, such that stand basal area growth was favored by higher temperatures, particularly due to positive responses of silver fir which were greater than negative effects of temperature on European beech. The high temperatures also favored the size-dominance of silver fir, while European beech tended to have smaller diameters, independent of the temperature. We also found that the identity of the size-dominant species also influenced changes in stand basal area, with the highest or the lowest changes when Norway spruce and European beech were the size-dominant species, respectively. Silver fir was less influenced by the identity of the size-dominant species than by temperature. Therefore, although mixed mountain forests of spruce-fir-beech were found to be resilient systems in terms of stand productivity, we conclude that increasing temperatures may modify species dynamics and consequently silvicultural interventions will be needed to control species proportions and dominances

The distribution of carbon stocks between tree woody biomass and soil differs between Scots pine and broadleaved species (beech, oak) in European forests

While the impacts of forest management options on carbon (C) storage are well documented, the way they affect C distribution among ecosystem components remains poorly investigated. Yet, partitioning of total forest C stocks, particularly between aboveground woody biomass and the soil, greatly impacts the stability of C stocks against disturbances in forest ecosystems. This study assessed the impact of species composition and stand density on C storage in aboveground woody biomass (stem + branches), coarse roots, and soil, and their partitioning in pure and mixed forests in Europe. We used 21 triplets (5 beech-oak, 8 pine-beech, 8 pine-oak mixed stands, and their respective monocultures at the same sites) in seven European countries. We computed biomass C stocks from total stand inventories and species-specific allometric equations, and soil organic C data down to 40 cm depth. On average, the broadleaved species stored more C in aboveground woody biomass than soil, while C storage in pine was equally distributed between both components. Stand density had a strong effect on C storage in tree woody biomass but not in the soil. After controlling for stand basal area, the mixed stands had, on average, similar total C stocks (in aboveground woody biomass + coarse roots + soil) to the most performing monocultures. Although species composition and stand density affect total C stocks and its partitioning between aboveground woody biomass and soil, a large part of variability in soil C storage was unrelated to stand characteristics

Species proportions by area in mixtures of Scots pine (Pinus sylvestris L.) and European beech (Fagus sylvatica L.)

Scots pine (Pinus sylvestris L.) and European beech (Fagus sylvatica L.) dominate many of the European forest stands. Also, mixtures of European beech and Scots pine more or less occur over all European countries, but have been scarcely investigated. The area occupied by each species is of high relevance, especially for growth evaluation and comparison of different species in mixed and monospecific stands. Thus, we studied different methods to describe species proportions and their definition as proportion by area. 25 triplets consisting of mixed and monospecific stands were established across Europe ranging 0from Lithuania to Spain in northern to southern direction and from Bulgaria to Belgium in eastern to western direction. On stand level, the conclusive method for estimating the species proportion as a fraction of the stand area relates the observed density (tree number or basal area) to its potential. This stand-level estimation makes use of the potential from comparable neighboring 0monospecific stands or from maximum density lines derived from other data, e.g. forest inventories or permanent observations plots. At tree level, the fraction of the stand area occupied by a species can be derived from the proportions of their crown projection area or of their leaf area. The estimates of the potentials obtained from neighboring monospecific stands, especially in older stands, were poorer than those from the maximum density line depending on the Martonne aridity index. Therefore, the stand-level method in combination with the Martonne ridity index for potential densities can be highly recommended. The species’ proportions estimated with this method are best approximated by the proportions of the species’ leaf areas. In forest practice, the most commonly applied method is an ocular estimation of the proportions by crown projection area. Even though the proportions of pine were calculated here by measuring crown projection areas in the field, we found this method to underestimate the proportion by 25% compared to the stand-level approach