451 research outputs found
Towards Intense Ultra-Broadband High Repetition Rate Terahertz Sources Based on Organic Crystals [Invited]
Increasing the average power of broadband, few-cycle terahertz (THz) sources
is currently a topic of intense investigation, fueled by recent immense
progress in high average power femtosecond laser driving sources at 1030 nm.
However, many crucial applications would benefit not only from an increase in
average power, but also from ultra-broad bandwidth, while maintaining high
dynamic range at these frequencies. This calls for the challenging combination
of high repetition rates and high average power simultaneously. Here, we
discuss the recent progress in the promising approach enabled by organic
crystals for THz-generation. Specifically, this review article discusses
advances with the most commonly used organic crystals BNA, DAST, DSTMS, OH1 and
HMQ-TMS. We place special emphasis on nonlinear and thermal properties and
discuss future directions for this field
Electromagnetic force density in dissipative isotropic media
We derive an expression for the macroscopic force density that a narrow-band
electromagnetic field imposes on a dissipative isotropic medium. The result is
obtained by averaging the microscopic form for Lorentz force density. The
derived expression allows us to calculate realistic electromagnetic forces in a
wide range of materials that are described by complex-valued electric
permittivity and magnetic permeability. The three-dimensional energy-momentum
tensor in our expression reduces for lossless media to the so-called Helmholtz
tensor that has not been contradicted in any experiment so far. The momentum
density of the field does not coincide with any well-known expression, but for
non-magnetic materials it matches the Abraham expression
Electronic structure, magnetism, and disorder in the Heusler compound CoTiSn
Polycrystalline samples of the half-metallic ferromagnet Heusler compound
CoTiSn have been prepared and studied using bulk techniques (X-ray
diffraction and magnetization) as well as local probes (Sn M\"ossbauer
spectroscopy and Co nuclear magnetic resonance spectroscopy) in order to
determine how disorder affects half-metallic behavior and also, to establish
the joint use of M\"ossbauer and NMR spectroscopies as a quantitative probe of
local ion ordering in these compounds. Additionally, density functional
electronic structure calculations on ordered and partially disordered
CoTiSn compounds have been carried out at a number of different levels of
theory in order to simultaneously understand how the particular choice of DFT
scheme as well as disorder affect the computed magnetization. Our studies
suggest that a sample which seems well-ordered by X-ray diffraction and
magnetization measurements can possess up to 10% of antisite (Co/Ti)
disordering. Computations similarly suggest that even 12.5% antisite Co/Ti
disorder does not destroy the half-metallic character of this material.
However, the use of an appropriate level of non-local DFT is crucial.Comment: 11 pages and 5 figure
Complex responses of global insect pests to climate warming
Although it is well known that insects are sensitive to temperature, how they will be affected by ongoing global warming remains uncertain because these responses are multifaceted and ecologically complex. We reviewed the effects of climate warming on 31 globally important phytophagous (plant-eating) insect pests to determine whether general trends in their responses to warming were detectable. We included four response categories (range expansion, life history, population dynamics, and trophic interactions) in this assessment. For the majority of these species, we identified at least one response to warming that affects the severity of the threat they pose as pests. Among these insect species, 41% showed responses expected to lead to increased pest damage, whereas only 4% exhibited responses consistent with reduced effects; notably, most of these species (55%) demonstrated mixed responses. This means that the severity of a given insect pest may both increase and decrease with ongoing climate warming. Overall, our analysis indicated that anticipating the effects of climate warming on phytophagous insect pests is far from straightforward. Rather, efforts to mitigate the undesirable effects of warming on insect pests must include a better understanding of how individual species will respond, and the complex ecological mechanisms underlying their responses
Magnetocrystalline Anisotropy Energy of Transition Metal Thin Films: A Non-perturbative Theory
The magnetocrystalline anisotropy energy E(anis) of free-standing monolayers
and thin films of Fe and Ni is determined using two different semi-empirical
schemes. Within a tight-binding calculation for the 3d bands alone, we analyze
in detail the relation between bandstructure and E(anis), treating spin-orbit
coupling non-pertubatively. We find important contributions to E(anis) due to
the lifting of band degeneracies near the Fermi level by SOC. The important
role of degeneracies is supported by the calculation of the electron
temperature dependence of the magnetocrystalline anisotropy energy, which
decreases with the temperature increasing on a scale of several hundred K. In
general, E(anis) scales with the square of the SOC constant. Including 4s bands
and s-d hybridization, the combined interpolation scheme yields anisotropy
energies that quantitatively agree well with experiments for Fe and Ni
monolayers on Cu(001). Finally, the anisotropy energy is calculated for systems
of up to 14 layers. Even after including s-bands and for multilayers, the
importance of degeneracies persists. Considering a fixed fct-Fe structure, we
find a reorientation of the magnetization from perpendicular to in-plane at
about 4 layers. For Ni, we find the correct in-plane easy-axis for the
monolayer. However, since the anisotropy energy remains nearly constant, we do
not find the experimentally observed reorientation.Comment: 15 pages, Revtex, 15 postscript figure
Digital mental health: challenges and next steps
Digital innovations in mental health offer great potential, but present unique challenges. Using a consensus development panel approach, an expert, international, cross-disciplinary panel met to provide a framework to conceptualise digital mental health innovations, research into mechanisms and effectiveness and approaches for clinical implementation. Key questions and outputs from the group were agreed by consensus, and are presented and discussed in the text and supported by case examples in an accompanying appendix. A number of key themes emerged. (1) Digital approaches may work best across traditional diagnostic systems: we do not have effective ontologies of mental illness and transdiagnostic/symptom-based approaches may be more fruitful. (2) Approaches in clinical implementation of digital tools/interventions need to be creative and require organisational change: not only do clinicians and patients need training and education to be more confident and skilled in using digital technologies to support shared care decision-making, but traditional roles need to be extended, with clinicians working alongside digital navigators and non-clinicians who are delivering protocolised treatments. (3) Designing appropriate studies to measure the effectiveness of implementation is also key: including digital data raises unique ethical issues, and measurement of potential harms is only just beginning. (4) Accessibility and codesign are needed to ensure innovations are long lasting. (5) Standardised guidelines for reporting would ensure effective synthesis of the evidence to inform clinical implementation. COVID-19 and the transition to virtual consultations have shown us the potential for digital innovations to improve access and quality of care in mental health: now is the ideal time to act
Bendable, low-loss Topas fibers for the terahertz frequency range
We report on a new class of polymer photonic crystal fibers for low-loss guidance of THz radiation. The use of the cyclic olefin copolymer Topas, in combination with advanced fabrication technology, results in bendable THz fibers with unprecedented low loss and low material dispersion in the THz regime.We demonstrate experimentally how the dispersion may be engineered by fabricating both high- and low-dispersion fibers with zero-dispersion frequency in the regime 0.5-0.6 THz. Near-field, frequencyresolved characterization with high spatial resolution of the amplitude and phase of the modal structure proves that the fiber is single-moded over a wide frequency range, and we see the onset of higher-order modes at high frequencies as well as indication of microporous guiding at low frequencies and high porosity of the fiber. Transmission spectroscopy demonstrates low-loss propagation (< 0.1 dB/cm loss at 0.6 THz) over a wide frequency range.Imaging Science and TechnologyApplied Science
Hubbard-U calculations for Cu from first-principles Wannier functions
We present first-principles calculations of optimally localized Wannier
functions for Cu and use these for an ab-initio determination of Hubbard
(Coulomb) matrix elements. We use a standard linearized muffin-tin orbital
calculation in the atomic-sphere approximation (LMTO-ASA) to calculate Bloch
functions, and from these determine maximally localized Wannier functions using
a method proposed by Marzari and Vanderbilt. The resulting functions were
highly localized, with greater than 89% of the norm of the function within the
central site for the occupied Wannier states. Two methods for calculating
Coulomb matrix elements from Wannier functions are presented and applied to fcc
Cu. For the unscreened on-site Hubbard for the Cu 3d-bands we have obtained
about 25eV. These results are also compared with results obtained from a
constrained local-density approximation (LDA) calculation.Comment: 13 pages, 8 figures, 5 table
Optimization of nanoantenna-enhanced terahertz emission from photoconductive antennas
We present the results of hybrid photoconductive antenna THz emission enhanced by silver nanoantenna arrays. By varying the size of nanoantennas and the distance between them, we obtain the greatest value of optical-to-THz conversion efficiency reached so far. The results of experimental investigations are in a good agreement with numerical simulations. The conversion efficiency reveals over 5-fold improvement at certain frequencies, if compared with similar photoconductive antenna without silver nanoparticles, while previous results for this type of antenna barely exceeded 2-fold conversion efficiency gain
Effect of Fe additive on the hydrogenation-dehydrogenation properties of 2LiH + MgB2/2LiBH4 + MgH2 system
Lithium reactive hydride composite 2LiBH4 + MgH2 (Li-RHC) has been lately investigated owing to its potential as hydrogen storage medium for mobile applications. However, the main problem associated with this material is its sluggish kinetic behavior. Thus, aiming to improve the kinetic properties, in the present work the effect of the addition of Fe to Li-RHC is investigated. The addition of Fe lowers the starting decomposition temperature of Li-RHC about 30 °C and leads to a considerably faster isothermal dehydrogenation rate during the first hydrogen sorption cycle. Upon hydrogenation, MgH2 and LiBH4 are formed whereas Fe appears not to take part in any reaction. Upon the first dehydrogenation, the formation of nanocrystalline, well distributed FeB reduces the overall hydrogen storage capacity of the system. Throughout cycling, the agglomeration of FeB particles causes a kinetic deterioration. An analysis of the hydrogen kinetic mechanism during cycling shows that the hydrogenation and dehydrogenation behavior is influenced by the activity of FeB as heterogeneous nucleation center for MgB2 and its non-homogenous distribution in the Li-RHC matrix.Fil: Puszkiel, Julián Atilio. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Helmholtz-zentrum Geesthacht - Zentrum Für Material- Und Küstenforschung Gmbh;Fil: Gennari, Fabiana Cristina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Centro Atómico Bariloche; ArgentinaFil: Arneodo Larochette, Pierre Paul. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Centro Atómico Bariloche; ArgentinaFil: Ramallo Lopez, Jose Martin. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas; ArgentinaFil: Vainio, U.. Helmholtz-zentrum Geesthacht - Zentrum Für Material- Und Küstenforschung Gmbh; . Deutsches Elektronen-Synchrotron; AlemaniaFil: Karimi, F.. Helmholtz-zentrum Geesthacht - Zentrum Für Material- Und Küstenforschung Gmbh;Fil: Pranzas, P. K.. Helmholtz-zentrum Geesthacht - Zentrum Für Material- Und Küstenforschung Gmbh;Fil: Troiani, Horacio Esteban. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Centro Atómico Bariloche; ArgentinaFil: Pistidda, C.. Helmholtz-zentrum Geesthacht - Zentrum Für Material- Und Küstenforschung Gmbh;Fil: Jepsen, J.. Helmholtz-zentrum Geesthacht - Zentrum Für Material- Und Küstenforschung Gmbh;Fil: Tolkiehn, M.. Deutsches Elektronen-Synchrotron; AlemaniaFil: Welter, E.. Deutsches Elektronen-Synchrotron; AlemaniaFil: Klassen, T.. Helmholtz-zentrum Geesthacht - Zentrum Für Material- Und Küstenforschung Gmbh;Fil: Bellosta Von Colbe, J.. Helmholtz-zentrum Geesthacht - Zentrum Für Material- Und Küstenforschung Gmbh;Fil: Dornheim, M.. Helmholtz-zentrum Geesthacht - Zentrum Für Material- Und Küstenforschung Gmbh
- …