49 research outputs found
Recommended from our members
Effect of compaction pressure on consolidation behaviour of unsaturated silty soil
The effect of compaction pressure on subsequent soil behaviour during isotropic consolidation has been investigated
by conducting controlled-suction triaxial tests on samples of an unsaturated compacted silty soil. A comprehensive
set of laboratory experiments was carried out in a double-walled triaxial apparatus on samples of unsaturated
soil that were prepared using two different compaction pressures. The axis translation technique was used for creating
the desired suctions in the samples. In the experiments, the soil samples were subjected to isotropic consolidation under
constant suctions. The results show that different compaction pressures produce different fabrics in a soil and therefore
affect the behaviour of the soil. The results also show that the value of yield stress and the location of the
loadingÂżcollapse (LC) yield curve are functions of soil fabric. Furthermore, it is shown that the slopes of normal consolidation
lines for densely and loosely compacted samples differ in unsaturated conditions but are the same in saturated
soils. A comparison is made between the behaviour of the dense and loose samples, and the difference in the
behaviour is explained
Mechanical strength of saline sandy soils stabilized with alkali-activated cements
Saline soils usually cannot satisfy the requirements of engineering projects because of their inappropriate geotechnical properties. For this reason, they have always been known as one of the problematic soils worldwide. Moreover, the lack of access to normal water has intensified the use of saline water resources such as seawater in many construction and mining projects. Although cement stabilization is frequently used to improve the engineering properties of saline soils, Portland cementâs usage as a binder is constrained by its negative consequences, particularly on the environment. In this line, the effects of NaCl on the microstructural and mechanical properties of alkali-activated volcanic ash/slag-stabilized sandy soil were investigated in this study. Moreover, the effects of binder type, slag replacement, curing time, curing condition, and NaCl content on the mechanical strength of stabilized soils were examined. In addition, microstructural analyses, including XRD, FTIR, and SEMâEDS mapping tests, were performed to understand the physical and chemical interaction of chloride ions and alkali-activated cements. The results show that alkali-activated slag can be a sustainable alternative to Portland cement for soil stabilization projects in saline environments. The increase in sodium chloride (NaCl) content up to 1 wt.% caused the strength development up to 244% in specimens with 50 and 100 wt.% slag, and adding more NaCl had no significant effect on the strength in all curing conditions. Microstructural investigations showed that the replacement of volcanic ash with slag resulted in the formation of C-S-H and C-A-S-H gels that reduced the porosity of the samples and increased mechanical strength. Furthermore, surface adsorption and chemical encapsulation mechanisms co-occurred in stabilized soil samples containing slag and volcanic ash
Effect of CO2 exposure on the mechanical strength of geopolymer-stabilized sandy soils
In recent years, there has been growing interest in developing methods for mitigating greenhouse effect, as greenhouse gas emissions continue to contribute to global temperature rise. On the other hand, investigating geopolymers as environmentally friendly binders to mitigate the greenhouse effect using soil stabilization has been widely conducted. However, the effect of CO2 exposure on the mechanical properties of geopolymer-stabilized soils is rarely reported. In this context, the effect of CO2 exposure on the mechanical and microstructural features of sandy soil stabilized with volcanic ash-based geopolymer was investigated. Several factors were concerned, for example the binder content, relative density, CO2 pressure, curing condition, curing time, and carbonate content. The results showed that the compressive strength of the stabilized sandy soil specimens with 20% volcanic ash increased from 3 MPa to 11 MPa. It was also observed that 100 kPa CO2 pressure was the optimal pressure for strength development among the other pressures. The mechanical strength showed a direct relationship with binder content and carbonate content. Additionally, in the ambient curing (AC) condition, the mechanical strength and carbonate content increased with the curing time. However, the required water for carbonation evaporated after 7 d of oven curing (OC) condition and as a result, the 14-d cured samples showed lower mechanical strength and carbonate content in comparison with 7-d cured samples. Moreover, the rate of strength development was higher in OC cured samples than AC cured samples until 7 d due to higher geopolymerization and carbonation rate
Investigating accelerated carbonation for alkali activated slag stabilized sandy soil
Portland cement as a commonly used material in soil stabilization projects, releases considerable amounts of CO2 into the atmosphere, highlighting the need to use green binders such as ground granulated blast furnace slag as a substitute for cement. On the other side, extensive research is being conducted on accelerated carbonation treatment to decrease the industryâs carbon footprint. Carbonation transforms CO2 into carbonate minerals. This study investigates the influence of accelerated carbonation on the unconfined compressive strength (UCS) of soil stabilized with alkali-activated slag under ambient and oven curing conditions. Effects of curing time, binder content, relative density, and carbonation pressure (100, 200, and 300 kPa) were also studied. Furthermore, a calcimeter test was conducted to determine the amount of carbonate generated, which reflects CO2 sequestration in soil. The results showed that the carbonated samples achieved higher strength than the non-carbonated samples. However, a slight decrease in UCS was observed with the increase in CO2 pressure. The generated carbonate content directly correlated with the UCS of the samples, which explained the higher strength of carbonated samples. Also, the ambient curing condition was more favorable for the samples stabilized with GGBS, which can be attributed to the supply of required moisture. Results from XRD, SEM, and FTIR indicated that the strength development was due mainly to the formation of carbonation products (CaCO3), which facilitated the densification of solidified materials
Experimental investigation of sandy soil stabilization using chitosan biopolymer
The performance of an environmentally friendly biopolymer synthesised from secondary resources to overcome the wind erosion of sandy soil was investigated in this study. The study employed a multi-scale approach to investigate the mechanical, erosional, and hydraulic properties of sandy soil. At the macroscale, experimental techniques such as unconfined and triaxial compression tests, permeability measurements, contact angle assessments, and wind tunnel experiments were utilized to characterize the bulk behavior of the soil. Concurrently, molecular dynamics (MD) simulations were conducted at the nanoscale to predict surface mechanical characteristics and elucidate chemical interactions at the molecular level. Results show that when the outer surface of the sandy particles is coated with a sparse concentration of biopolymer, the sandy aerosol inhibitory performance is significant even under extreme storm conditions reaching speeds of 140âŻkm/h of storms. The study on the impact of biopolymer content, curing time, and curing conditions revealed that the addition of chitosan biopolymer has the ability to enhance the bonding between particles and significantly enhance the mechanical properties of sandy soil. The atomic insight from molecular dynamics reveals huge entanglement between sandy particles and biopolymer by Van der Waals interaction. The results of the Unconfined Compressive Strength test indicate that chitosan enhances the compressive strength of sand by up to 320âŻkPa. Additionally, the triaxial test demonstrated that the application of chitosan led to a 34.2âŻkPa improvement in the cohesion of sand. Furthermore, analysis of the permeability test results revealed a decrease in the hydraulic conductivity coefficient from 1.6âŻĂâŻ10^-6 m/s to 5.7âŻĂâŻ10^-7 m/s, representing a reduction of approximately 35âŻ%
A surrogate model for simulationâoptimization of aquifer systems subjected to seawater intrusion
This study presents the application of Evolutionary Polynomial Regression (EPR) as a pattern recognition system to predicate the behavior of nonlinear and computationally complex aquifer systems subjected to
seawater intrusion (SWI). The developed EPR models are integrated with a multi objective genetic algorithm
to examine the efficiency of different arrangements of hydraulic barriers in controlling SWI. The
objective of the optimization is to minimize the economic and environmental costs. The developed EPR model is trained and tested for different control scenarios, on sets of data including different pumping
patterns as inputs and the corresponding set of numerically calculated outputs. The results are compared
with those obtained by direct linking of the numerical simulation model with the optimization
tool. The results of the two above-mentioned simulationâoptimization (S/O) strategies are in excellent
agreement. Three management scenarios are considered involving simultaneous use of abstraction and
recharge to control SWI. Minimization of cost of the management process and the salinity levels in the
aquifer are the two objective functions used for evaluating the efficiency of each management scenario.
By considering the effects of the unsaturated zone, a subsurface pond is used to collect the water and artificially
recharge the aquifer. The distinguished feature of EPR emerges in its application as the metamodel
in the S/O process where it significantly reduces the overall computational complexity and time. The
results also suggest that the application of other sources of water such as treated waste water (TWW)
and/or storm water, coupled with continuous abstraction of brackish water and its desalination and use is the most cost effective method to control SWI. A sensitivity analysis is conducted to investigate
the effects of different external sources of recharge water and different recovery ratios of desalination
plant on the optimal results
Cost-of-Illness Analysis of Type 2 Diabetes Mellitus in Iran
Diabetes is a worldwide high prevalence chronic progressive disease that poses a significant challenge to healthcare systems. The aim of this study is to provide a detailed economic burden of diagnosed type 2 diabetes mellitus (T2DM) and its complications in Iran in 2009 year.This is a prevalence-based cost-of-illness study focusing on quantifying direct health care costs by bottom-up approach. Data on inpatient hospital services, outpatient clinic visits, physician services, drugs, laboratory test, education and non-medical cost were collected from two national registries. The human capital approach was used to calculate indirect costs separately in male and female and also among different age groups.The total national cost of diagnosed T2DM in 2009 is estimated at 3.78 billion USA dollars (USD) including 2.04±0.28 billion direct (medical and non-medical) costs and indirect costs of 1.73 million. Average direct and indirect cost per capita was 842.6±102 and 864.8 USD respectively. Complications (48.9%) and drugs (23.8%) were main components of direct cost. The largest components of medical expenditures attributed to diabetes's complications are cardiovascular disease (42.3% of total Complications cost), nephropathy (23%) and ophthalmic complications (14%). Indirect costs include temporarily disability (335.7 million), permanent disability (452.4 million) and reduced productivity due to premature mortality (950.3 million).T2DM is a costly disease in the Iran healthcare system and consume more than 8.69% of total health expenditure. In addition to these quantified costs, T2DM imposes high intangible costs on society in terms of reduced quality of life. Identification of effective new strategies for the control of diabetes and its complications is a public health priority
Design and optimization of microstructure of auxetic materials
Purpose â Auxetic materials differ from conventional materials by the manner in which they respond to stretching; they tend to get fatter when stretched, resulting in a negative Poissonâs ratio. The purpose of this paper is to present a numerical methodology for design of microstructure of 2D and 3D auxetic materials with a wide range of different negative Poissonâs ratios.
Design/methodology/approach â The proposed methodology is based on a combination of finite element method and a genetic algorithm. The problem is formulated as an optimization problem of finding microstructures with prescribed behavioral requirements. Different microstructures are generated and evolved using the genetic algorithm and the behavior of each microstructure is analyzed using the finite element method to evaluate its fitness in competition with other generated structures.
Findings â Numerical examples show that it is possible to design a large number of new auxetic materials, each with a different value of negative Poissonâs ratio. Originality/value â The proposed methodology can be used as an effective method to tailor new materials with prescribed values of negative (or positive) Poissonâs ratio. The methodology can also be used to optimize other material properties
Analysis of Interaction of Multiple Cracks Based on Tip Stress Field Using Extended Finite Element Method
A new method is presented to study the interaction of multiple cracks, especially for the areas near crack tips by using the extended finite element method. In order to track the cracks, a new geometric tracking technique is proposed to track enriched elements and nodes along the crack instead of using the narrow band level set method. This allows to accurately determine enriched elements and nodes and calculate enrichment values. A method is proposed for constructing a multicrack matrix, which involves numbering enriched nodes of multiple cracks and solving the global stiffness matrix. In this approach, the stress fields around multiple cracks can be studied. The interaction integral method is employed to study the crack propagation and its direction by calculating the stress intensify factor. The developed model has been coded in MATLAB environment and validated against analytical solutions. The application of the model in the crack interaction study is demonstrated through a number of examples. The results illustrate the influence of the interaction of multiple cracks as they approach each other