A comparison between single sided friction stir welded and submerged arc welded DH36 steel thin plate

The adoption of the friction stir welding (FSW) process into the shipbuilding industry is being considered as a medium term issue. Currently the data on friction stir welded mild steels tends to be fragmented, with critical areas being short on specific data e.g. toughness. The work described has been put in place to directly compare friction stir welded and submerged arc welded thin plate. The plate thicknesses used were 4, 6 and 8mm thick DH36 grade steel, which are commonly used in the construction of vessels such and destroyers, frigates corvettes and offshore patrol vessels. Friction stir welding was carried out using the currently best established parameters for a single sided process and this was compared against Submerged Arc Welding (SAW) over the same thickness range. Distortion was found to be lower in friction stir welded steel, but the 4mm thick was still showing significant distortion. No issues were identified with weld metal strength, and toughness at -20OC was found to be comparable but more uniform across the weld area than with the submerged arc welded material. Microstructural observations have been linked to hardness, toughness and fatigue test data. The fatigue data includes the observation of preferential crack initiation relative to the trailing/leading side of the welding process. An assessment on the feasibility of the process in a shipbuilding environment will be included based on the data presented

Effect of lightning strike on bromine intercalated graphite fiber/epoxy composites

Laminar composites were fabricated from pristine and bromine intercalated pitch based graphite fibers. It was found that laminar composites could be fabricated using either pristine or intercalated graphite fibers using standard fabrication techniques. The intercalated graphite fiber composites had electrical properties which were markedly improved over both the corresponding pitch based and polyacrylonitrile (PAN) based composites. Despite composites resistivities more than an order of magnitude lower for pitch based fiber composites, the lightning strike resistance was poorer than that of the Pan based fiber composites. This leads to the conclusion that the mechanical properties of the pitch fibers are more important than electrical or thermal properties in determining the lightning strike resistance. Based on indicated lightning strike tolerance for high elongation to failure materials, the use of vapor grown, rather than pitch based graphite fibers appears promising

TB53: The Suitability of Certain Stains for Studying Lignification in Balsam Fir, Abies balsamea (L.) Mill

An investigation was conducted to examine the suitability of ten staining reactions for studying lignification in balsam fir, Abies balsamea (L.) Mill. Two experiments were carried out on material collected on two different dates. In each experiment slides of fresh, FAA-killed and FAA-killed celloldin-embedded material of normal and compression wood were stained and evaluated.https://digitalcommons.library.umaine.edu/aes_techbulletin/1148/thumbnail.jp

TB41: The Potential of Lignin Research

Lignin constitutes a vast natural resource, which can be found in various forms depending on where it is obtained and how it is isolated. To most easily isolate lignin, we must understand more thoroughly its chemical structure and how it is bound to the other wall components. To use lignin more effectively and develop new uses for it, we must understand its properties. Likewise, the most effective use of lignin-containing materials such as wood and wood products depends on understanding how their properties are affected by the properties of lignin.https://digitalcommons.library.umaine.edu/aes_techbulletin/1158/thumbnail.jp

Duloxetine in the treatment of generalized anxiety disorder

Duloxetine, a medication with effects on both serotonin and noradrenaline transporter molecules, has recently been approved for the treatment of generalized anxiety disorder. The evidence for its efficacy lies in a limited number of double blind, placebo controlled comparisons. Statistically significant improvements in the Hamilton Anxiety Rating Scale from baseline were demonstrated in all studies at doses of 60 to 120 mg per day. The significance of such changes in terms of clinical improvements compared to placebo is less certain, particularly when the effect size of the change is calculated. In comparative trials with venlafaxine, duloxetine was as effective in providing relief of anxiety symptoms. In addition to improvements in clinical symptoms duloxetine has also been associated with restitution of role function as measured by disability scales. Duloxetine use is associated with nausea, dizziness, dry mouth, constipation, insomnia, somnolence, hyperhidrosis, decreased libido and vomiting. These treatment emergent side effects were generally of mild to moderate severity and were tolerated over time. Using a tapered withdrawal schedule over two weeks in the clinical trials, duloxetine was associated with only a mild withdrawal syndrome in up to about 30% of patients compared to about 17% in placebo treated patients. Duloxetine in doses of up to 200 mg twice daily did not prolong the QTc interval in healthy volunteers. Like other agents with dual neurotransmitter actions duloxetine reduces the symptoms of generalized anxiety disorder in short term treatments. Further evidence for its efficacy and safety in long term treatment is required

Continuation treatment of major depressive disorder: is there a case for duloxetine?

Duloxetine is a serotonin–noradrenaline reuptake inhibitor with established efficacy for the short-term treatment of major depressive disorder. Efficacy in continuation treatment (greater than six months of continuous treatment) has been established from both open and placebo-controlled relapse prevention and comparative studies. Seven published studies were available for review and showed that in both younger and older populations (aged more than 65 years) the acute efficacy of duloxetine was maintained for up to one year. Response to treatment was based on accepted criteria for remission of depression and in continuation studies remission rates were greater than 70%. Comparative studies showed that duloxetine was superior to placebo and comparable to paroxetine and escitalopram in relapse prevention. Importantly a study of duloxetine in patients prone to relapse of major depressive disorder showed that the medication was more effective than placebo in this difficult to treat population. Side effects of duloxetine during continuation treatment were predictable on the basis of the known pharmacology of the drug. In particular there were no significant life-threatening events which emerged with continued use of the medication. On the other hand vigilance is required since the data base on which to judge very rare events is limited by the relatively low exposure to the drug. Duloxetine has established both efficacy and safety for continuation treatment but its place as a first-line treatment of relapse prevention requires further experience. In particular further comparative studies against established agents would be useful in deciding the place of duloxetine in therapy

Expanding Representations for Historical Content in Literacy

In spite of the need for literacy educators to possess an understanding of the history of the field, such historical perspectives are often absent in current programs, even at the graduate level. Fortunately, embedding history in programs and courses can be done in a variety of meaningful, engaging, and simple ways. In this article we present and describe several approaches for instructors who want to embed or even expand history into current literacy courses. We organize these approaches into three areas: Inquiry-based learning, dramatic structures, and humanistic approaches

User-Defined Material Model for Progressive Failure Analysis

An overview of different types of composite material system architectures and a brief review of progressive failure material modeling methods used for structural analysis including failure initiation and material degradation are presented. Different failure initiation criteria and material degradation models are described that define progressive failure formulations. These progressive failure formulations are implemented in a user-defined material model (or UMAT) for use with the ABAQUS/Standard1 nonlinear finite element analysis tool. The failure initiation criteria include the maximum stress criteria, maximum strain criteria, the Tsai-Wu failure polynomial, and the Hashin criteria. The material degradation model is based on the ply-discounting approach where the local material constitutive coefficients are degraded. Applications and extensions of the progressive failure analysis material model address two-dimensional plate and shell finite elements and three-dimensional solid finite elements. Implementation details and use of the UMAT subroutine are described in the present paper. Parametric studies for composite structures are discussed to illustrate the features of the progressive failure modeling methods that have been implemented

Cosmological Radiation Hydrodynamics with ENZO

We describe an extension of the cosmological hydrodynamics code ENZO to include the self-consistent transport of ionizing radiation modeled in the flux-limited diffusion approximation. A novel feature of our algorithm is a coupled implicit solution of radiation transport, ionization kinetics, and gas photoheating, making the timestepping for this portion of the calculation resolution independent. The implicit system is coupled to the explicit cosmological hydrodynamics through operator splitting and solved with scalable multigrid methods. We summarize the numerical method, present a verification test on cosmological Stromgren spheres, and then apply it to the problem of cosmological hydrogen reionization.Comment: 14 pages, 3 figures, to appear in Recent Directions in Astrophysical Quantitative Spectroscopy and Radiation Hydrodynamics, Ed. I. Hubeny, American Institute of Physics (2009