Multi-detection and polarisation contrast in scannning near-field optical microscopy in reflection

A new type of NSOM probe has been developed, with a design based o­n the probes used in Atomic Force Microscopy. The probe consists of a cantilever with at its end a conical tip. This tip has been metal-coated to provide an aperture. With the cantilevered probe, the problem of breaking of the tip due to high normal forces is solved. In operation, the tip is scanned in contact with the sample while regulating the force between the tip and the sample with a beam deflection technique, which allows to simultaneously make an optical and a topographical image of the sample. The probes are made using micromechanical techniques, which allows batch fabrication of the probes. Testing of the probes is done in a transmission NSOM set-up in which the sample is scanned while the tip and the optical path are kept fixed. Using an opaque sample with submicron holes, the new probes have been tested, resulting an optical image with a simultaneously measured topographical image

Detection of fluorescence in situ hybridization on human metaphase chromosomes by near-field scanning optical microscopy

Fluorescence in situ hybridization signals o­n human metaphase chromosomes are detected by a near-field scanning optical microscope. This makes it possible to localize and identify several fluorescently labeled genomic DNA fragments o­n a single chromosome with a resolution superior to traditional fluorescence microscopy. Several nucleic acid probes have been used. The hybridization signals are well resolved in the near- field fluorescence images, and the exact location of the probes can be correlated to the topography as it is afforded by the shear-force feedback

Hybrid Pixel Detector Development for the Linear Collider Vertex Tracker

In order to fully exploit the physics potential of the future high energy e+e- linear collider, a Vertex Tracker able to provide particle track extrapolation with very high resolution is needed. Hybrid Si pixel sensors are an attractive technology due to their fast read-out capabilities and radiation hardness. A novel pixel detector layout with interleaved cells has been developed to improve the single point resolution. Results of the characterisation of the first processed prototypes by electrostatic measurements and charge collection studies are discussed.Comment: 5 pages, 1 figure, to appear in the Proceedings of the 9th Int. Workshop on Vertex Detectors, Lake Michigan MI (USA), September~200

Hybrid pixel detector development for the Linear collider Vertex Detector

In order to fully exploit the Physics potential of future e+ e- linear collider, a Vertex Detector providing high resolution track reconstruction is required. Hybrid Silicon pixel detectors are an attractive option for the sensor technology due to their read-out speed and radiation hardness but have been so far limited by the achievable single point resolution. A novel layout of hybrid pixel sensor with interleaved cells to improve the spatial resolution has been developed. The characterisation of the first processed prototypes is reported.Comment: 5 pages, 5 figures. Presented at the IEEE Nuclear Science Symposium and Medical Imaging Conference, October 15-20 2000, Lyon, Franc

A new method for reconstructing the density distribution of matter in the disks of spiral galaxies from the rotation velocity curve in it

In this paper we propose a new method for reconstructing the surface density of matter in flat disks of spiral galaxies. The surface density is expressed through observational rotation velocity curves of visible matter in the disks of spiral galaxies. The new method is not based on quadrature of special functions. The found solution is used for processing and analysis of observational data from several spiral galaxies. The new method can be used to more accurately estimate the amount of dark matter in spiral galaxies.Comment: 18 pages, 6 figure

Position-sensitive Si pad detectors for electron emission channeling experiments

Position-sensitive detector systems, initially developed for the detection of X-rays, have been adapted for their use in electron emission channeling experiments. Each detection system consists of a 30.8x30.8 mm$^{2}$ 22x22 -pad Si detector, either of 0.3 mm, 0.5 mm or 1 mm thickness, four 128$-$channel preamplifier chips, a backplane trigger circuit, a sampling analog to digital converter, a digital signal processor, and a personal computer for data display and storage. The operational principle of these detection systems is described, and characteristic features such as energy and position resolution and maximum count rate, which have been determined from tests with conversion electrons and $\beta^-\!$ -particles in the energy range 40--600 keV, are presented

Performance of the LHCb vertex locator

The Vertex Locator (VELO) is a silicon microstrip detector that surrounds the proton-proton interaction region in the LHCb experiment. The performance of the detector during the first years of its physics operation is reviewed. The system is operated in vacuum, uses a bi-phase CO2 cooling system, and the sensors are moved to 7 mm from the LHC beam for physics data taking. The performance and stability of these characteristic features of the detector are described, and details of the material budget are given. The calibration of the timing and the data processing algorithms that are implemented in FPGAs are described. The system performance is fully characterised. The sensors have a signal to noise ratio of approximately 20 and a best hit resolution of 4 μm is achieved at the optimal track angle. The typical detector occupancy for minimum bias events in standard operating conditions in 2011 is around 0.5%, and the detector has less than 1% of faulty strips. The proximity of the detector to the beam means that the inner regions of the n+-on-n sensors have undergone space-charge sign inversion due to radiation damage. The VELO performance parameters that drive the experiment's physics sensitivity are also given. The track finding efficiency of the VELO is typically above 98% and the modules have been aligned to a precision of 1 μm for translations in the plane transverse to the beam. A primary vertex resolution of 13 μm in the transverse plane and 71 μm along the beam axis is achieved for vertices with 25 tracks. An impact parameter resolution of less than 35 μm is achieved for particles with transverse momentum greater than 1 GeV/c

Precision luminosity measurements at LHCb

Measuring cross-sections at the LHC requires the luminosity to be determined accurately at each centre-of-mass energy √s. In this paper results are reported from the luminosity calibrations carried out at the LHC interaction point 8 with the LHCb detector for √s = 2.76, 7 and 8 TeV (proton-proton collisions) and for √sNN = 5 TeV (proton-lead collisions). Both the "van der Meer scan" and "beam-gas imaging" luminosity calibration methods were employed. It is observed that the beam density profile cannot always be described by a function that is factorizable in the two transverse coordinates. The introduction of a two-dimensional description of the beams improves significantly the consistency of the results. For proton-proton interactions at √s = 8 TeV a relative precision of the luminosity calibration of 1.47% is obtained using van der Meer scans and 1.43% using beam-gas imaging, resulting in a combined precision of 1.12%. Applying the calibration to the full data set determines the luminosity with a precision of 1.16%. This represents the most precise luminosity measurement achieved so far at a bunched-beam hadron collider

Silicon detector for a Compton Camera in Nuclear Medical Imaging

Electronically collimated gamma ca\-me\-ras based on Com\-pton scattering in silicon pad sensors may improve imaging in nuclear medicine and bio-medical research. The work described here concentrates on the silicon pad detector developed for a prototype Compton camera. The silicon pad sensors are read out using low noise VLSI CMOS chips and novel fast triggering chips. Depending on the application a light weight and dense packaging of sensors and its readout electronics on a hybrid is required. We describe the silicon pad sensor and their readout with the newly designed hybrid. %The silicon detector of a Compton camera %may contain up to $10^5$~analogue channels requiring %a fast and low cost data acquisition system. We also describe a modular and low-cost data acquisition system (CCDAQ) based on a digital signal processor which is interfaced to the EPP port of personal computers. Using the CCDAQ and the hybrids energy spectra of gamma-ray photons from technetium ($^{\rm 99m}_{43}$Tc) and americium ($^{241}_{95}$Am) were acquired with an energy resolution of 2.45~keV FWHM for the 140.5~keV photo-absorption line of $^{\rm 99m}_{43}$Tc. For all pads the discrimination threshold in the trigger chip was between (15 and 25)~keV