Decadal link between longitudinal morphological changes in branching channels of Yangtze Estuary and movement of the offshore depo-center

In estuaries, the morphology of inland and offshore areas usually evolves synergistically. This study examines the decadal link between longitudinal changes in morphology of branching channels and movement of the offshore depo-center (where sediment deposition rate is maximum) of the Yangtze River estuary, under intense human interference. Integrated data analysis is provided on morphology, runoff discharge, and ebb partition ratio from 1950 to 2017. Channel-volume reductions and change rates between isobaths in branching channels reflect the impact of estuarine engineering projects. Ebb partition ratio and duration of discharge ≥ 60 000 m3 s-1 act as proxies for the water excavating force in branching channels and runoff intensity. It is found that deposition occurs in the lower/upper sub-reaches (or further downstream/upstream channels) of the inland north/south branching channels, and the offshore depo-center moves southward or southeastward, as runoff intensity grows; the reverse occurs as runoff intensity declines. This is because the horizontal circumfluence in the Yangtze estuary rotates clockwise as ebb partition ratios of the north/south branching channels increase/decrease for increasing runoff, and conversely rotates anticlockwise for decreasing runoff. Land reclamation activities, the Deepwater Channel Project, and the Qingcaosha Reservoir have impacted greatly on longitudinal changes of morphology in the North Branch and the South Passage and on ebb partition ratio variations in the North/South Channel and the North/South Passage. Dam-induced runoff flattening has enhanced deposition in the upper/lower sub-reaches of the north/south branching channels and caused northward movement of the offshore depo-center, except in areas affected by estuarine engineering projects. Dam-induced longitudinal evolution of branching channel morphology and offshore depo-center movement will likely persist in the future, given the ongoing construction of large cascade dams in the upper Yangtze and the completion of major projects in the Yangtze estuary

Self-sustained CO Combustion Induced by CuCe0.75Zr0.25Oy Catalysts with Different Pore-forming Methods

CO self-sustaining combustion, induced by a CuCe0.75Zr0.25Oy catalyst, has been confirmed experimentally as an effective strategy to reduce serious environmental pollution and energy waste, which is caused by direct combustion of conventional converter gas in the steelmaking industry. In this paper, the effects of CuCe0.75Zr0.25Oy catalysts prepared by a sol-gel method via three different pore-forming agents (oxalic acid, cellulose and thermal decomposition) were investigated for their catalytic activity of self-sustained CO combustion. Additionally, characterization methods were used to obtain the structural properties of each catalyst. The results obtained show that the CuCe0.75Zr0.25Oy catalyst, as a sol-gel pore-forming agent, prepared from cellulose exhibits the highest activity among the three catalysts. Under the condition of a reaction gas (3% CO+5% O-2/N-2), the T-10 (70 degrees C), T-50 (73 degrees C) and T-90 (78 degrees C) of the cellulose catalyst are obviously lower than those of the other catalysts, where T-10, T-50 and T-90 denote the reaction temperature corresponding to the CO conversion of 10%, 50% and 90%, respectively. The reason is that the cellulose pore-forming agent promotes the formation of a multistage porous structure, which strengthens the synergistic effect between the Cu and Ce catalysts and changes the redox property of the overall catalyst. On the one hand, the strong synergy between CuO and CeO2 adjusts the dispersion and chemical state of copper nanoparticles. On the other hand, the oxygen vacancies generated locate at the copper-cerium interface enhance the ability of oxygen storage and oxygen release of the catalyst

Self-sustained combustion of CO with transient changes and reaction mechanism over CuCe0.75Zr0.25O delta powder for honeycomb ceramic catalyst

A CuCe0.75Zr0.25O delta catalyst was prepared by the sol-gel method and successfully coated on honeycomb ceramic (HC) carrier. The activity of CuCe0.75Zr0.25O delta/HC was determined by the CO-TPO + FLIR, with the results performing that the critical condition for CO self-sustained combustion is 3 vol% CO + 3 vol% O-2/N-2 at 0.5 L/min. As the CO concentration increases from 1 vol% CO to 3 vol% CO, the induction process ( T-15) shifts to rapid ignition with a transient change for the CO oxidation reaction. The furnace temperature for CO self-sustained combustion decreases with increasing the CO and O-2 concentrations. Upon increasing the CO2 concentration, however, furnace temperature is needed to increase and realize CO complete conversion. The thermal stability test combined with SEM + EDX results indicate that the CuCe0.75Zr0.25O delta/HC retains an excellent thermal stability after a 200 h, and the high-temperature region remains at 225 +/- 1 degrees C during the CO self-combustion reaction. The activity of catalyst is reduced slightly after the 200 h test because of the carbon deposition on the catalyst surface, but such a slight deactivation can be eliminated by the air oxidation method. In situ IR results show a competitive adsorption of CO/O-2 and CO2 on the Cu-Ce active sites, indicating that the addition of gaseous CO2 performs an inhibition of CO oxidation. CO preferentially adsorbs linearly at Cu+ sites to form carbonyls that react with lattice oxygen to produce CO2 to release, which can be ascribed to M-K mechanism. The L-H mechanism is less important, which involves the relatively weak reaction of adsorbed CO and adsorbed oxygen on the Cu-Ce active sites to form carbonate species

Solvothermal synthesis and thermoelectric properties of indium telluride nanostring-cluster hierarchical structures

A simple solvothermal approach has been developed to successfully synthesize n-type α-In2Te3 thermoelectric nanomaterials. The nanostring-cluster hierarchical structures were prepared using In(NO3)3 and Na2TeO3 as the reactants in a mixed solvent of ethylenediamine and ethylene glycol at 200°C for 24 h. A diffusion-limited reaction mechanism was proposed to explain the formation of the hierarchical structures. The Seebeck coefficient of the bulk pellet pressed by the obtained samples exhibits 43% enhancement over that of the corresponding thin film at room temperature. The electrical conductivity of the bulk pellet is one to four orders of magnitude higher than that of the corresponding thin film or p-type bulk sample. The synthetic route can be applied to obtain other low-dimensional semiconducting telluride nanostructures

Epigenetic Regulation of Histone H3 Serine 10 Phosphorylation Status by HCF-1 Proteins in C. elegans and Mammalian Cells

BACKGROUND: The human herpes simplex virus (HSV) host cell factor HCF-1 is a transcriptional coregulator that associates with both histone methyl- and acetyltransferases, and a histone deacetylase and regulates cell proliferation and division. In HSV-infected cells, HCF-1 associates with the viral protein VP16 to promote formation of a multiprotein-DNA transcriptional activator complex. The ability of HCF proteins to stabilize this VP16-induced complex has been conserved in diverse animal species including Drosophila melanogaster and Caenorhabditis elegans suggesting that VP16 targets a conserved cellular function of HCF-1. METHODOLOGY/PRINCIPAL FINDINGS: To investigate the role of HCF proteins in animal development, we have characterized the effects of loss of the HCF-1 homolog in C. elegans, called Ce HCF-1. Two large hcf-1 deletion mutants (pk924 and ok559) are viable but display reduced fertility. Loss of Ce HCF-1 protein at reduced temperatures (e.g., 12 degrees C), however, leads to a high incidence of embryonic lethality and early embryonic mitotic and cytokinetic defects reminiscent of mammalian cell-division defects upon loss of HCF-1 function. Even when viable, however, at normal temperature, mutant embryos display reduced levels of phospho-histone H3 serine 10 (H3S10P), a modification implicated in both transcriptional and mitotic regulation. Mammalian cells with defective HCF-1 also display defects in mitotic H3S10P status. CONCLUSIONS/SIGNIFICANCE: These results suggest that HCF-1 proteins possess conserved roles in the regulation of cell division and mitotic histone phosphorylation

PRC1 and PRC2 Are Not Required for Targeting of H2A.Z to Developmental Genes in Embryonic Stem Cells

The essential histone variant H2A.Z localises to both active and silent chromatin sites. In embryonic stem cells (ESCs), H2A.Z is also reported to co-localise with polycomb repressive complex 2 (PRC2) at developmentally silenced genes. The mechanism of H2A.Z targeting is not clear, but a role for the PRC2 component Suz12 has been suggested. Given this association, we wished to determine if polycomb functionally directs H2A.Z incorporation in ESCs. We demonstrate that the PRC1 component Ring1B interacts with multiple complexes in ESCs. Moreover, we show that although the genomic distribution of H2A.Z co-localises with PRC2, Ring1B and with the presence of CpG islands, H2A.Z still blankets polycomb target loci in the absence of Suz12, Eed (PRC2) or Ring1B (PRC1). Therefore we conclude that H2A.Z accumulates at developmentally silenced genes in ESCs in a polycomb independent manner

Measuring proliferation in breast cancer: practicalities and applications

Various methods are available for the measurement of proliferation rates in tumours, including mitotic counts, estimation of the fraction of cells in S-phase of the cell cycle and immunohistochemistry of proliferation-associated antigens. The evidence, advantages and disadvantages for each of these methods along with other novel approaches is reviewed in relation to breast cancer. The potential clinical applications of proliferative indices are discussed, including their use as prognostic indicators and predictors of response to systemic therapy

Global Chronic Total Occlusion Crossing Algorithm

The authors developed a global chronic total occlusion crossing algorithm following 10 steps: 1) dual angiography; 2) careful angiographic review focusing on proximal cap morphology, occlusion segment, distal vessel quality, and collateral circulation; 3) approaching proximal cap ambiguity using intravascular ultrasound, retrograde, and move-the-cap techniques; 4) approaching poor distal vessel quality using the retrograde approach and bifurcation at the distal cap by use of a dual-lumen catheter and intravascular ultrasound; 5) feasibility of retrograde crossing through grafts and septal and epicardial collateral vessels; 6) antegrade wiring strategies; 7) retrograde approach; 8) changing strategy when failing to achieve progress; 9) considering performing an investment procedure if crossing attempts fail; and 10) stopping when reaching high radiation or contrast dose or in case of long procedural time, occurrence of a serious complication, operator and patient fatigue, or lack of expertise or equipment. This algorithm can improve outcomes and expand discussion, research, and collaboration.info:eu-repo/semantics/publishedVersio