Photonics and fracture toughness of heterogeneous composite materials

Fracture toughness measures the resistance of a material to fracture. This fundamental property is used in diverse engineering designs including mechanical, civil, materials, electronics and chemical engineering applications. In spite of the advancements made in the past 40 years, the evaluation of this remains challenging for extremely heterogeneous materials such as composite concretes. By taking advantage of the optical properties of a thin birefringent coating on the surface of opaque, notched composite concrete beams, here we sense the evolution of the maximum shear stress distribution on the beams under loading. The location of the maximum deviator stress is tracked ahead of the crack tip on the experimental concrete samples under the ultimate load, and hence the effective crack length is characterised. Using this, the fracture toughness of a number of heterogeneous composite beams is evaluated and the results compare favourably well with other conventional methods using combined experimental and numerical/analytical approaches. Finally a new model, correlating the optically measured shear stress concentration factor and flexural strength with the fracture toughness of concretes is proposed. The current photonics-based study could be vital in evaluating the fracture toughness of even opaque and complex heterogeneous materials more effectively in future

Characterisation of mechanical and thermal properties in flax fabric reinforced geopolymer composites

This paper presents the mechanical and thermal properties of flax fabric reinforced fly ash based geopolymer composites. Geopolymer composites reinforced with 2.4, 3.0 and 4.1 wt% woven flax fabric in various layers were fabricated using a hand lay-up technique and tested for mechanical properties such as flexural strength, flexural modulus, compressive strength, hardness, and fracture toughness. All mechanical properties were improved by increasing the flax fibre contents, and showed superior mechanical properties over a pure geopolymer matrix. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) studies were carried out to evaluate the composition and fracture surfaces of geopolymer and geopolymer/flax composites. The thermal behaviour of composites was studied by thermogravimetric analysis (TGA) and the results showed significant degradation of flax fibres at 300 °C

Mechanical properties of cotton fabric reinforced geopolymer composites at 200-1000 °C

Geopolymer composites containing woven cotton fabric (0–8.3 wt%) were fabricated using the hand lay-up technique, and were exposed to elevated temperatures of 200 °C, 400 °C, 600 °C, 800 °C and 1000 °C. With an increase in temperature, the geopolymer composites exhibited a reduction in compressive strength, flexural strength and fracture toughness. When heated above 600 °C, the composites exhibited a significant reduction in mechanical properties. They also exhibited brittle behavior due to severe degradation of cotton fibres and the creation of additional porosity in the composites. Microstructural images verified the existence of voids and small channels in the composites due to fibre degradation

SURVEY OF SANDFLY FAUNA (DIPTERA: PSYCHODIDAE) IN UBERLÂNDIA, MINAS GERAIS STATE, BRAZIL, 2003-2004

We analyzed the sandflies around houses and domestic animal shelters located in residences close to forests in localities on the banks of the Araguari River, Uberlândia, MG, from February 2003 to November 2004. The phlebotomines were captured in the peridomiciliary area, where Shannon traps were utilized in the peridomicile and CDC traps in animal shelters. 2,783 specimens of sandflies were captured, 2,140 females (76.9%) and 643 males (23.1%), distributed between 17 species. The most abundant species was Nyssomyia neivai (88.1%), followed by Nyssomyia whitmani (3.1%). The presence of Lutzomyia longipalpis was also confirmed, it is the main vector of Leishmania (L.) infantum chagasi which causes visceral leishmaniasis. The presence of species involved in the transmission of leishmaniases in the municipality of Uberlândia is cause for concern. The presence of L. longipalpis indicates that its urbanization may not have been aleatory and instead occurred through the destruction of wild ecotopes. More studies of their occupation in anthropic environments need to be made

Link between microbial composition and carbon substrate-uptake preferences in a PHA-storing community

The microbial community of a fermented molasses-fed sequencing batch reactor (SBR) operated under feast and famine conditions for production of polyhydroxyalkanoates (PHAs) was identified and quantified through a 16 S rRNA gene clone library and fluorescence in situ hybridization (FISH). The microbial enrichment was found to be composed of PHA-storing populations (84% of the microbial community), comprising members of the genera Azoarcus, Thauera and Paracoccus. The dominant PHA-storing populations ensured the high functional stability of the system (characterized by high PHA-storage efficiency, up to 60% PHA content). The fermented molasses contained primarily acetate, propionate, butyrate and valerate. The substrate preferences were determined by microautoradiography-FISH and differences in the substrate-uptake capabilities for the various probe-defined populations were found. The results showed that in the presence of multiple substrates, microbial populations specialized in different substrates were selected, thereby co-existing in the SBR by adapting to different niches. Azoarcus and Thauera, primarily consumed acetate and butyrate, respectively. Paracoccus consumed a broader range of substrates and had a higher cell-specific substrate uptake. The relative species composition and their substrate specialization were reflected in the substrate removal rates of different volatile fatty acids in the SBR reactor