Chemistry in Second Life

This review will focus on the current level on chemistry research, education, and visualization possible within the multi-user virtual environment of Second Life. We discuss how Second Life has been used as a platform for the interactive and collaborative visualization of data from molecules and proteins to spectra and experimental data. We then review how these visualizations can be scripted for immersive educational activities and real-life collaborative research. We also discuss the benefits of the social networking affordances of Second Life for both chemists and chemistry students

Assessing methods to improve benthic fish sampling in a stony headwater stream

Electrofishing is a well-established and widely used method for surveying fish populations. Nonetheless, its effectiveness is impacted by numerous factors, including water chemistry, habitat type and fish species. Both physiological and behavioural responses make bottom-dwelling ‘benthic’ fish which lack swim bladders (e.g. European bullhead Cottus gobio) particularly difficult to survey by electrofishing. We compare the performance and practicalities of electrofishing for benthic fish at a rocky northern English headwater stream with two sampling methods originally designed for crayfish surveys; the triple drawdown method which involves repeated dewatering of a site, and the Pritchard Trap method which involves sunken traps filled with natural substrate that samples a small, fixed (0.25 m2) area of river bed. Both the Pritchard trapping and triple drawdown methods provided similar high-density population density estimates for bullhead which were at least 2.5–5 times higher than predicted from electrofishing derived sweep depletion curves. Electrofishing and the triple drawdown method are both resource-intensive, requiring expensive equipment and a team of trained operatives. These approaches also pose a risk to fish and non-target organisms. In contrast, Pritchard Traps provide a cost-effective passive, low risk survey method requiring minimal training and only one operative. Pritchard traps, therefore, show particular promise for benthic fish surveying and monitoring

The Assessment of Total Energy Expenditure During a 14-Day In-Season Period of Professional Rugby League Players Using the Doubly Labelled Water Method

Rugby League is a high-intensity collision sport competed over 80 min. Training loads are monitored to maximize recovery and assist in the design of nutritional strategies although no data are available on the total energy expenditure (TEE) of players. We therefore assessed resting metabolic rate (RMR) and TEE in six Super League players over 2 consecutive weeks in-season including one game per week. Fasted RMR was assessed followed by a baseline urine sample before oral administration of a bolus dose of hydrogen (deuterium 2H) and oxygen (18O) stable isotopes in the form of water (2H218O). Every 24 hr thereafter, players provided urine for analysis of TEE via DLW method. Individual training load was quantified using session rating of perceived exertion (sRPE) and data were analyzed using magnitude-based inferences. There were unclear differences in RMR between forwards and backs (7.7 ± 0.5 cf. 8.0 ± 0.3 MJ, respectively). Indirect calorimetry produced RMR values most likely lower than predictive equations (7.9 ± 0.4 cf. 9.2 ± 0.4 MJ, respectively). A most likely increase in TEE from Week 1 to 2 was observed (17.9 ± 2.1 cf. 24.2 ± 3.4 MJ) explained by a most likelyincrease in weekly sRPE (432 ± 19 cf. 555 ± 22 AU), respectively. The difference in TEE between forward and backs was unclear (21.6 ± 4.2 cf. 20.5 ± 4.9 MJ, respectively). We report greater TEE than previously reported in rugby that could be explained by the ability of DLW to account for all match and training-related activities that contributes to TEE

The Debrisoft ® monofilament debridement pad for use in acute or chronic wounds: A NICE medical technology guidance

As part of its Medical Technology Evaluation Programme, the National Institute for Health and Care Excellence (NICE) invited a manufacturer to provide clinical and economic evidence for the evaluation of the Debrisoft ® monofilament debridement pad for use in acute or chronic wounds. The University of Birmingham and Brunel University, acting as a consortium, was commissioned to act as an External Assessment Centre (EAC) for NICE, independently appraising the submission. This article is an overview of the original evidence submitted, the EAC’s findings and the final NICE guidance issued. The sponsor submitted a simple cost analysis to estimate the costs of using Debrisoft® to debride wounds compared with saline and gauze, hydrogel and larvae. Separate analyses were conducted for applications in home and applications in a clinic setting. The analysis took an UK National Health Service (NHS) perspective. It incorporated the costs of the technologies and supplementary technologies (such as dressings) and the costs of their application by a district nurse. The sponsor concluded that Debrisoft® was cost saving relative to the comparators. The EAC made amendments to the sponsor analysis to correct for errors and to reflect alternative assumptions. Debrisoft® remained cost saving in most analyses and savings ranged from £77 to £222 per patient compared with hydrogel, from £97 to £347 compared with saline and gauze, and from £180 to £484 compared with larvae depending on the assumptions included in the analysis and whether debridement took place in a home or clinic setting. All analyses were severely limited by the available data on effectiveness, in particular a lack of comparative studies and that the effectiveness data for the comparators came from studies reporting different clinical endpoints compared with Debrisoft®. The Medical Technologies Advisory Committee made a positive recommendation for adoption of Debrisoft® and this has been published as a NICE medical technology guidance (MTG17).The Birmingham and Brunel Consortium is funded by NICE to act as an External Assessment Centre for the Medical Technologies Evaluation Programme

Damage function for historic paper. Part I: Fitness for use

Background In heritage science literature and in preventive conservation practice, damage functions are used to model material behaviour and specifically damage (unacceptable change), as a result of the presence of a stressor over time. For such functions to be of use in the context of collection management, it is important to define a range of parameters, such as who the stakeholders are (e.g. the public, curators, researchers), the mode of use (e.g. display, storage, manual handling), the long-term planning horizon (i.e. when in the future it is deemed acceptable for an item to become damaged or unfit for use), and what the threshold of damage is, i.e. extent of physical change assessed as damage. Results In this paper, we explore the threshold of fitness for use for archival and library paper documents used for display or reading in the context of access in reading rooms by the general public. Change is considered in the context of discolouration and mechanical deterioration such as tears and missing pieces: forms of physical deterioration that accumulate with time in libraries and archives. We also explore whether the threshold fitness for use is defined differently for objects perceived to be of different value, and for different modes of use. The data were collected in a series of fitness-for-use workshops carried out with readers/visitors in heritage institutions using principles of Design of Experiments. Conclusions The results show that when no particular value is pre-assigned to an archival or library document, missing pieces influenced readers/visitors’ subjective judgements of fitness-for-use to a greater extent than did discolouration and tears (which had little or no influence). This finding was most apparent in the display context in comparison to the reading room context. The finding also best applied when readers/visitors were not given a value scenario (in comparison to when they were asked to think about the document having personal or historic value). It can be estimated that, in general, items become unfit when text is evidently missing. However, if the visitor/reader is prompted to think of a document in terms of its historic value, then change in a document has little impact on fitness for use

A Survey of Satisfiability Modulo Theory

Satisfiability modulo theory (SMT) consists in testing the satisfiability of first-order formulas over linear integer or real arithmetic, or other theories. In this survey, we explain the combination of propositional satisfiability and decision procedures for conjunctions known as DPLL(T), and the alternative "natural domain" approaches. We also cover quantifiers, Craig interpolants, polynomial arithmetic, and how SMT solvers are used in automated software analysis.Comment: Computer Algebra in Scientific Computing, Sep 2016, Bucharest, Romania. 201

Normal modes and discovery of high-order cross-frequencies in the DBV white dwarf GD 358

We present a detailed mode identification performed on the 1994 Whole Earth Telescope (WET) run on GD 358. The results are compared with that obtained for the same star from the 1990 WET data. The two temporal spectra show very few qualitative differences, although amplitude changes are seen in most modes, including the disappearance of the mode identified as k=14 in the 1990 data. The excellent coverage and signal-to-noise ratio obtained during the 1994 run lead to the secure identification of combination frequencies up to fourth order, i.e. peaks that are sums or differences of up to four parent frequencies, including a virtually complete set of second-order frequencies, as expected from harmonic distortion. We show how the third-order frequencies are expected to affect the triplet structure of the normal modes by back-interacting with them. Finally, a search for ℓ=2 modes was unsuccessful, not verifying the suspicion that such modes had been uncovered in the 1990 data set

The emotional movie database (EMDB): a self-report and psychophysiological study

Film clips are an important tool for evoking emotional responses in the laboratory. When compared with other emotionally potent visual stimuli (e.g., pictures), film clips seem to be more effective in eliciting emotions for longer periods of time at both the subjective and physiological levels. The main objective of the present study was to develop a new database of affective film clips without auditory content, based on a dimensional approach to emotional stimuli (valence, arousal and dominance). The study had three different phases: (1) the pre-selection and editing of 52 film clips (2) the self-report rating of these film clips by a sample of 113 participants and (3) psychophysiological assessment [skin conductance level (SCL) and the heart rate (HR)] on 32 volunteers. Film clips from different categories were selected to elicit emotional states from different quadrants of affective space. The results also showed that sustained exposure to the affective film clips resulted in a pattern of a SCL increase and HR deceleration in high arousal conditions (i.e., horror and erotic conditions). The resulting emotional movie database can reliably be used in research requiring the presentation of non-auditory film clips with different ratings of valence, arousal and dominance.Portuguese Foundation for Science and Technology with individual grants (SFRH/BD/41484/2007 and SFRH/BD/64355/2009

Resource description framework technologies in chemistry

ISSN:1758-294

Psychophysiological Correlates of Sexually and Non-Sexually Motivated Attention to Film Clips in a Workload Task

Some authors have speculated that the cognitive component (P3) of the Event-Related Potential (ERP) can function as a psychophysiological measure of sexual interest. The aim of this study was to determine if the P3 ERP component in a workload task can be used as a specific and objective measure of sexual motivation by comparing the neurophysiologic response to stimuli of motivational relevance with different levels of valence and arousal. A total of 30 healthy volunteers watched different films clips with erotic, horror, social-positive and social-negative content, while answering an auditory oddball paradigm. Erotic film clips resulted in larger interference when compared to both the social-positive and auditory alone conditions. Horror film clips resulted in the highest levels of interference with smaller P3 amplitudes than erotic and also than social-positive, social-negative and auditory alone condition. No gender differences were found. Both horror and erotic film clips significantly decreased heart rate (HR) when compared to both social-positive and social-negative films. The erotic film clips significantly increased the skin conductance level (SCL) compared to the social-negative films. The horror film clips significantly increased the SCL compared to both social-positive and social-negative films. Both the highly arousing erotic and non-erotic (horror) movies produced the largest decrease in the P3 amplitude, a decrease in the HR and an increase in the SCL. These data support the notion that this workload task is very sensitive to the attentional resources allocated to the film clip, although they do not act as a specific index of sexual interest. Therefore, the use of this methodology seems to be of questionable utility as a specific measure of sexual interest or as an objective measure of the severity of Hypoactive Sexual Desire Disorder