Identification of non-host resistance genes in wheat to barley yellow rust

Yellow rust, caused by Puccinia striiformis West., is an important foliar disease of wheat and barley throughout the world, and the development of resistant cultivars is the most economical and environmentally friendly method of control. Breeding for resistance to yellow rust has, for decades, been based on the use of race-specific resistance genes, which have shown to be short-lived. Non-host resistance has been studied as a possible source of durable resistance. Two major genes, as well as an undetermined number of minor genes, for non-host resistance to the barley attacking form of yellow rust, P. striiformis f. sp. hordei, have been previously detected in the wheat cultivar ‘Lemhi’. The present study aimed at quantifying and mapping those genes using QTL (quantitative trait loci) mapping procedures. For that purpose, an F2 population of 114 individuals resulting from the cross of resistant ‘Lemhi’ with ‘Chinese 166’, a wheat cultivar susceptible to barley yellow rust, was used as the mapping population. QTL effects and significance were estimated by means of interval mapping and MQM mapping procedures. A map for the F2 population was constructed which included 116 DNA markers (14 SSRs and 102 AFLPs). Two major QTLs have been mapped to chromosome arms 1DS (Psh1) and 2BL (Psh2), with significant LOD values. These two QTLs account for 76.7% of the phenotypic variance for resistance to barley yellow rust. Two other QTLs, with a minor effect, were mapped to chromosome arms 5AL (Psh3) and 6AL (Psh4), explaining 5.1% and 10.9% of the phenotypic variation, respectively. The QTL on 5A was derived from the susceptible variety, ‘Chinese 166’. In all cases the resistance towards P. striiformis f.sp. hordei was associated with a visual chlorosis/necrosis response typical of race-specific, host resistance

Relationship between incommensurability and superconductivity in Peierls distorted charge-density-wave systems

We study the pairing potential induced by fluctuations around a charge-density wave (CDW) with scattering vector Q by means of the Froehlich transformation. For general commensurability M, defined as |k+M*Q>=|k>, we find that the intraband pair scattering within the M subbands scales with M whereas the interband pair scattering becomes suppressed with increasing CDW order parameter. As a consequence superconductivity is suppressed when the Fermi energy is located between the subbands as it is usually the case for nesting induced CDW's, but due to the vertex renormalization it can be substantially enhanced when the chemical potential is shifted sufficiently inside one of the subbands. The model can help to understand the experimentally observed dependence of the superconducting transition temperature from the stripe phase incommensurability in the lanthanum cuprates.Comment: 6 pages, 3 figure

Theory of a Scanning Tunneling Microscope with a Two-Protrusion Tip

We consider a scanning tunneling microscope (STM) such that tunneling occurs through two atomically sharp protrusions on its tip. When the two protrusions are separated by at least several atomic spacings, the differential conductance of this STM depends on the electronic transport in the sample between the protrusions. Furthermore two-protrusion tips commonly occur during STM tip preparation. We explore possible applications to probing dynamical impurity potentials on a metallic surface and local transport in an anisotropic superconductor.Comment: revtex, 11 pages, 6 figures upon reques

Hadron resonances generated from the dynamics of the lightest scalar ones

We have studied the interactions of the scalar resonances f_0(980) and a_0(980) with the vector resonance \phi(1020) and with the lightest pseudoscalars \pi, K, \eta and \eta'. We first obtain the interaction kernels without including any new free parameter. Afterwards, the interaction kernels are unitarized and the final S-wave amplitudes result. We find that these interactions are very rich and generate a large amount of pseudoscalar resonances including the K(1460), \pi(1300), \pi(1800), \eta(1475) and X(1835) resonances. The f_0(980)\phi(1020) self-interactions give rise to the \phi(2170) resonance. For realistic choices of the parameters we also obtain an isovector companion in the same mass region from the a_0(980) \phi(1020) interactions.Comment: 4 pafes, 4 figures. Invited talk at QCD 10 (25th anniversary), 15th International QCD Conference, 28th June - 3rd July 2010 Montpellier (France). To be published in Nucl. Phys. B (Proc. Suppl.

Theory for the excitation spectrum of High-T$_c superconductors : quasiparticle dispersion and shadows of the Fermi surface

Using a new method for the solution of the FLEX-equations, which allows the determination of the self energy $\Sigma_{\bf k}(\omega)$ of the $2D$ Hubbard model on the real frequency axis, we calculate the doping dependence of the quasi-particle excitations of High-T$_c$ superconductors. We obtain new results for the shadows of the Fermi surface, their dependence on the deformation of the quasi particle dispersion, an anomalous $\omega$-dependence of ${\rm Im}\Sigma_{\bf k}(\omega)$ and a related violation of the Luttinger theorem. This sheds new light on the influence of short range magnetic order on the low energy excitations and its significance for photoemission experiments.Comment: 4 pages (REVTeX) with 3 figure

Etude de l'anisotropie d'endommagement de l'alliage d'aluminium 6061-T6

National audienceL'alliage d'aluminium 6061-T6 est retenu pour la fabrication du caisson-coeur du réacteur expérimental Jules Horowitz. Une étude de caractérisation des propriétés mécaniques en traction montre que le matériau présente une anisotropie marquée de l'allongement total liée à l'anisotropie d'endommagement. Afin d'expliquer ce phénomène, le lien entre la microstructure et le comportement mécanique est proposé dans ce travail. Une quantification des précipités grossiers qui sont à l'origine des mécanismes d'endommagement a été réalisée par analyse d'images. Une étude du comportement mécanique des précipités et de la matrice par micro-indentation montre une différence marquée de comportement entre les phases. Afin de confirmer le rôle des précipités grossiers dans les mécanismes d'endommagement, des essais de traction MEB in-situ ont été effectués. Les précipités Mg2Si et les intermétalliques s'endommagent progressivement durant tous ces essais. En outre, une analyse post mortem après déformation par tomographie X a montré une anisotropie de répartition de cavités. Un scénario d'endommagement de coalescence anisotrope intégrant l'alignement des précipités induit par le procédé de mise en forme semble expliquer l'anisotropie d'endommagement en traction

Realistic Neutrino Opacities for Supernova Simulations With Correlations and Weak Magnetism

Advances in neutrino transport allow realistic neutrino interactions to be incorporated into supernova simulations. We add tensor couplings to relativistic RPA calculations of neutrino opacities. Our results reproduce free-space neutrino-nucleon cross sections at low density, including weak magnetism and recoil corrections. In addition, our opacities are thermodynamically consistent with relativistic mean field equations of state. We find antineutrino mean free paths that are considerably larger then those for neutrinos. This difference depends little on density. In a supernova, this difference could lead to an average energy of $\bar\nu_\mu$ that is larger than that for $\nu_\mu$ by an amount that is comparable to the energy difference between $\nu_\mu$ and $\bar\nu_e$Comment: 15 pages, 10 figures, submitted to PRC, minor changes to figs. (9,10

Explosive events - swirling transition region jets

In this paper, we extend our earlier work to provide additional evidence for an alternative scenario to explain the nature of so-called `explosive events'. The bi-directed, fast Doppler motion of explosive events observed spectroscopically in the transition region emission is classically interpreted as a pair of bidirectional jets moving upward and downward from a reconnection site. We discuss the problems of such a model. In our previous work, we focused basically on the discrepancy of fast Doppler motion without detectable motion in the image plane. We now suggest an alternative scenario for the explosive events, based on our observations of spectral line tilts and bifurcated structure in some events. Both features are indicative of rotational motion in narrow structures. We explain the bifurcation as the result of rotation of hollow cylindrical structures and demonstrate that such a sheath model can also be applied to explain the nature of the puzzling `explosive events'. We find that the spectral tilt, the lack of apparent motion, the bifurcation, and a rapidly growing number of direct observations support an alternative scenario of linear, spicular-sized jets with a strong spinning motion.Comment: 9 pages, 3 figures, accepted for publication in Solar Physic

Amplification of evanescent waves in a lossy left-handed material slab

We carry out finite-difference time-domain (FDTD) simulations, with a specially-designed boundary condition, on pure evanescent waves interacting with a lossy left-handed material (LHM) slab. Our results provide the first full-wave numerical evidence for the amplification of evanescent waves inside a LHM slab of finite absorption. The amplification is due to the interactions between the evanescent waves and the coupled surface polaritons at the two surfaces of the LHM slab and the physical process can be described by a simple model.Comment: 4 pages, 2 figure

Research of Curve Fitting Method on the Measured Settlement of Tanks

AbstractThe settlement data of oil storage tanks made of steel are measured by the measurement points located around the base of the tank wall. The measured settlement data need to be curve fitted in order to reflect the settlement distribution around the whole tank wall base. Considering about the disadvantage of measured settlement data treatment methods on tanks in current standards, an optimization method of curve fitting on the measured settlement data is presented. The Fourier series expansion is used to analyze the measured settlement data, the fitting curves and mean square error according to different order are obtained. The fitting curve with minimum mean square error is selected as the most appropriate one that reflects the actual displacement of the tank base. The optimization method of curve fitting present is applied to analyze the measured settlement data obtained from the floating roof tank and the fixed roof tank. Results show that different effects can be obtained with different order of the fitting curve. Curve fitting referring to different order is necessary to the measured settlement data in actual engineering in order to find the most appropriate one that reflects the real tank base displacement distribution