Wettability influences cell behavior on superhydrophobic surfaces with different topographies

Surface wettability and topography are recognized as critical factors influencing cell behavior on biomaterials. So far only few works have reported cell responses on surfaces exhibiting extreme wettability in combination with surface topography. The goal of this work is to study whether cell behavior on superhydrophobic surfaces is influenced by surface topography and polymer type. Biomimetic superhydrophobic rough surfaces of polystyrene and poly(l-lactic acid) with different micro/nanotopographies were obtained from smooth surfaces using a simple phase-separation based method. Total protein was quantified and showed a less adsorption of bovine serum albumin onto rough surfaces as compared to smooth surfaces of the same material. The mouse osteoblastic MC3T3-E1 cell line and primary bovine articular chondrocytes were used to study cell attachment and proliferation. Cells attached and proliferate better in the smooth surfaces. The superhydrophobic surfaces allowed cells to adhere but inhibited their proliferation. This study indicates that surface wettability, rather than polymer type or the topography of the superhydrophobic surfaces, is a critical factor in determining cell behavior

Characterization of poled and non-poled β-PVDF films using thermal analysis techniques

ß-poly(vinylidene fluoride)—ß-PVDF—exhibits ferroelectric properties due to the special arrangement of the chain units in the crystalline phase. The ferroelectric phase can be optimised by poling the original stretched film, that tends to align the randomly organised crystallites against the applied field. In this work, polarised and non-polarised ß-PVDF from the same batch are characterised by mechanical tests and a series of thermal analysis techniques, including DMA, TMA and DSC. The films exhibit mechanical anisotropy, and in the longitudinal direction the poled film presents larger mechanical properties, due to the higher structural organisation. Poled and non-poled show similar crystallinity levels but the melting temperature probed by DSC is higher for the non-poled film; for both films the melting peak exhibits a complex shape, indicating a heterogeneous crystalline organization. Two relaxation processes were found (ß and alpha_c) by dynamic mechanical analysis (DMA). The ß process, attributed to segmental motions in the amorphous phase, appears at the same temperature in both directions, but its intensity was found to be higher for the films tested in the longitudinal direction. For a given direction, the poled films exhibit lower peaks, due to the more organised amorphous structure. At higher temperature, the alpha_c-relaxationwas related to the contraction of the films in the longitudinal direction during heating, recorded by thermal mechanical analysis (TMA). The onset of molecular mobility within the crystalline phase allows for cooperative diffusion processes in the amorphous phase, generating the randomisation of the initially oriented structure.Fundação para a Ciência e Tecnologia (FCT) - Programa Operacional "Ciência, Tecnologia, Inovação" (POCTI) - POCTI/CTM/33501/99

Temperature-responsive nanomagnetic logic gates for cellular hyperthermia

While a continuous monitoring of temperature at the micro- and nano-scales is clearly of interest in many contexts, in many others a yes or no answer to the question "did the system locally exceed a certain temperature threshold?" can be more accurate and useful. This is the case of hard-to-detect events, such as those where temperature fluctuations above a defined threshold are shorter than the typical integration time of micro/nanothermometers and systems where fluctuations are rare events in a wide time frame. Herein we present the synthesis of iron selenide magnetic nanoplatelets and their use as non-volatile logic gates recording the near infrared (NIR) dose that triggers a temperature increase above a critical temperature around 42 °C in prostate cancer cell cultures. This use is based on the bistable behavior shown by the nanoplatelets below a magnetic phase transition at a tunable temperature T C and on their photothermal response under NIR light. The obtained results indicate that the synthesized nanomagnets may be employed in the future as both local heaters and temperature monitoring tools in a wide range of contexts involving systems which, as cells, are temperature-sensitive around the tunable T C

An investigation of the potential application of chitosan/aloe-based membranes for regenerative medicine

A significant number of therapeutics derived from natural polymers and plants have been developed to replace or to be used in conjunction with existing dressing products. The use of the therapeutic properties of aloe vera could be very useful in the creation of active wound dressing materials. The present work was undertaken to examine issues concerning structural features, topography, enzymatic degradation behavior, antibacterial activity and cellular response of chitosan/aloe vera-based membranes. The chitosan/aloe vera-based membranes that were developed displayed satisfactory degradation, roughness, wettability and mechanical properties. A higher antibacterial potency was displayed by the blended membranes. Moreover, in vitro assays demonstrated that these blended membranes have good cell compatibility with primary human dermal fibroblasts. The chitosan/aloe vera-based membranes might be promising wound dressing materials.The authors acknowledge financial support from the Portuguese Foundation for Science and Technology (grants SFRH/BPD/45307/2008 and SFRH/BD/64601/2009), the "Fundo Social Europeu", and the "Programa Diferencial de Potencial Humano". This work was partially supported by the FEDER through POCTEP 0330_IBEROMARE_1_P

Departure from the vogel behaviour in the glass transition region-thermally stimulated recovery, creep and dynamic mechanical analysis studies

In this work the study of the dynamics of the segmental motions close to Tg of a poly(methyl methacrylate), PMMA, network was analysed by distinct mechanical spectroscopy techniques. Three techniques were employed: dynamic mechanical analysis (DMA), creep and thermally stimulated recovery (TSR). The time–temperature superposition principle was applied to the DMA and creep results, and master curves were successfully constructed. A change from a Vogel to an Arrhenius behaviour was observed in these results. Above Tg it was found a distinct temperature dependence for the retardation times calculated from creep and the relaxation times calculated from DMA. This unexpected behaviour was attributed to the merging of the a and the b relaxations that occurs in PMMA systems. The apparent activation energies ðEaÞ were also calculated from DMA, creep and TSR experiments. Above Tg the Ea values obtained agreed very well for all the techniques. In addition, the fragility exhibited by this material was investigated by the mechanical spectroscopy techniques referred above and by differential scanning calorimetry (DSC). The obtained values of the fragility index m indicated that the PMMA network is a kinetically fragile system. The thermodynamic manifestation of the fragility was also analysed

Low-diffusion Xe-He gas mixtures for rare-event detection: electroluminescence yield

High pressure xenon Time Projection Chambers (TPC) based on secondary scintillation (electroluminescence) signal amplification are being proposed for rare event detection such as directional dark matter, double electron capture and double beta decay detection. The discrimination of the rare event through the topological signature of primary ionisation trails is a major asset for this type of TPC when compared to single liquid or double-phase TPCs, limited mainly by the high electron diffusion in pure xenon. Helium admixtures with xenon can be an attractive solution to reduce the electron diffu- sion significantly, improving the discrimination efficiency of these optical TPCs. We have measured the electroluminescence (EL) yield of Xe–He mixtures, in the range of 0 to 30% He and demonstrated the small impact on the EL yield of the addition of helium to pure xenon. For a typical reduced electric field of 2.5 kV/cm/bar in the EL region, the EL yield is lowered by ∼ 2%, 3%, 6% and 10% for 10%, 15%, 20% and 30% of helium concentration, respectively. This decrease is less than what has been obtained from the most recent simulation framework in the literature. The impact of the addition of helium on EL statistical fluctuations is negligible, within the experimental uncertainties. The present results are an important benchmark for the simulation tools to be applied to future optical TPCs based on Xe-He mixtures. [Figure not available: see fulltext.]

The NEXT White (NEW) detector

Conceived to host 5 kg of xenon at a pressure of 15 bar in the fiducial volume, the NEXT-White apparatus is currently the largest high pressure xenon gas TPC using electroluminescent amplification in the world. It is also a 1:2 scale model of the NEXT-100 detector for Xe-136 beta beta 0 nu decay searches, scheduled to start operations in 2019. Both detectors measure the energy of the event using a plane of photomultipliers located behind a transparent cathode. They can also reconstruct the trajectories of charged tracks in the dense gas of the TPC with the help of a plane of silicon photomultipliers located behind the anode. A sophisticated gas system, common to both detectors, allows the high gas purity needed to guarantee a long electron lifetime. NEXT-White has been operating since October 2016 at the Laboratorio Subterraneo de Canfranc (LSC), in Spain. This paper describes the detector and associated infrastructures, as well as the main aspects of its initial operation

Measurement of radon-induced backgrounds in the NEXT double beta decay experiment

The measurement of the internal 222Rn activity in the NEXT-White detector during the so-called Run-II period with 136Xe-depleted xenon is discussed in detail, together with its implications for double beta decay searches in NEXT. The activity is measured through the alpha production rate induced in the fiducial volume by 222Rn and its alpha-emitting progeny. The specific activity is measured to be (38.1 ± 2.2 (stat.) ± 5.9 (syst.)) mBq/m3. Radon-induced electrons have also been characterized from the decay of the 214Bi daughter ions plating out on the cathode of the time projection chamber. From our studies, we conclude that radon-induced backgrounds are sufficiently low to enable a successful NEXT-100 physics program, as the projected rate contribution should not exceed 0.1 counts/yr in the neutrinoless double beta decay sample