Biomechanical comparison of the pullout properties of external skeletal fixation pins in the tibiae of intact and ovariectomised ewes.

The pin-bone interface is the least stable component of the external skeletal fixator. Concerns exist regarding the ability to obtain adequate implant purchase in poor quality bone. Consequently, reduced bone quality has been viewed as a contra-indication for the use of external skeletal fixators. The aim of this study was to investigate the holding power of two different fixator pin designs in bone from entire and ovariectomised sheep. Thirty-two aged ewes were divided into two groups. Group 1 were controls, and Group 2 were ovariectomised (OVX). The ewes were sacrificed 12 months post-ovariectomy and five pairs of tibiae were harvested from each group. The holding power of cortical and cancellous fixator pins was assessed at five standardised locations on each tibia. An increase in mean cortical thickness was noted in the OVX group. The holding power of cancellous fixator pins was superior to that of cortical pins, irrespective of whether or not ovariectomy had been performed. Cancellous pins had an increased holding power in post ovariectomy bone compared to control bone. Cortical pin performance was not affected by ovariectomy. There was a lack of correlation between the incidence of insertional fractures of the far cortex and implant holding power. The results raise questions over the effectiveness of ovariectomy in establishing osteopaenic bone suitable for assessing implant performance, hence further investigations are warranted

Dispersion of carbon nanotubes in polyamide 6 for microinjection moulding

The focus of this study was to investigate the dispersion state of pure and functionalized carbon nanotubes in polyamide 6, on composites prepared by twin-screw extrusion and then processed by microinjection moulding. Nanocomposites were prepared with different carbonvnanotube compositions, with and without functionalization. The nanotubes were functionalized by the 1,3-dipolar cycloaddition reaction. The dispersion of the carbon nanotube agglomerates was quantified using optical microscopy and image analysis. The effect of functionalization on the polyamide 6/carbon nanotube interface, the nanocomposite morphology and the mechanical and electrical properties were studied. It was observed that the microinjected composites with functionalized carbon nanotubes presented improved dispersion, with smaller carbon nanotube agglomerate area ratio compared to the composites with pure nanotubes. The functionalized nanotubes showed better adhesion to polyamide 6 compared to pure nanotubes, as observed by scanning electron microscopy. The incorporation of carbon nanotubes considerably improved the mechanical properties. The effect of high polymer shear rate on carbon nanotube alignment during microinjection moulding was assessed by comparing the electrical resistivity of the composite after extrusion and after microinjection moulding, through the thickness and along the flow direction. The experiments showed that the mould design and processing conditions significantly affected electrical resistivity.Fundação para a Ciência e Tecnologia (project PEst-C/CTM/LA0025/2013

Men, rheumatoid arthritis, psychosocial impact and self-management: A narrative review.

Rheumatoid arthritis (RA) is a chronic disease affecting fewer men than women. We systematically reviewed the literature on impact and self-management of RA men. Twenty eight papers were included, and grouped into two categories: Psychosocial impact of RA; and Coping and self-management. This review finds gender differences relating to quality of life; work; distress; self-management; coping; and support. We conclude there is a dearth of literature focussing on RA men only, and mixed gender studies include insufficient men to draw strong conclusions about men. Thus, further research is needed to understand the support needs of men with RA in depth

Downregulation of TLX induces TET3 expression and inhibits glioblastoma stem cell self-renewal and tumorigenesis

International audienceGlioblastomas have been proposed to be maintained by highly tumorigenic glioblastoma stem cells (GSCs) that are resistant to current therapy. Therefore, targeting GSCs is critical for developing effective therapies for glioblastoma. In this study, we identify the regulatory cascade of the nuclear receptor TLX and the DNA hydroxylase Ten eleven translocation 3 (TET3) as a target for human GSCs. We show that knockdown of TLX expression inhibits human GSC tumorigenicity in mice. Treatment of human GSC-grafted mice with viral vector-delivered TLX shRNA or nanovector-delivered TLX siRNA inhibits tumour development and prolongs survival. Moreover, we identify TET3 as a potent tumour suppressor downstream of TLX to regulate the growth and self-renewal in GSCs. This study identifies the TLX-TET3 axis as a potential therapeutic target for glioblastoma

Wide Contact Structures for Low-Noise Nanochannel Devices Based on a Carbon Nanotube Network

We have developed a wide contact structure for low-noise nanochannel devices based on a carbon nanotube (CNT) network. This low-noise CNT network-based device has a dumbbell-shaped channel, which has wide CNT/electrode contact regions and, in effect, reduces the contact noise. We also performed a systematic analysis of structured CNT networks and established an empirical formula that can explain the noise behavior of arbitrary-shaped CNT network-based devices including the effect of contact regions and CNT alignment. Interestingly, our analysis revealed that the noise amplitude of aligned CNT networks behaves quite differently compared with that of randomly oriented CNT networks. Our results should be an important guideline in designing low-noise nanoscale devices based on a CNT network for various applications such as a highly sensitive low-noise sensor

To Recycle or Not to Recycle? An Intergenerational Approach to Nuclear Fuel Cycles

This paper approaches the choice between the open and closed nuclear fuel cycles as a matter of intergenerational justice, by revealing the value conflicts in the production of nuclear energy. The closed fuel cycle improve sustainability in terms of the supply certainty of uranium and involves less long-term radiological risks and proliferation concerns. However, it compromises short-term public health and safety and security, due to the separation of plutonium. The trade-offs in nuclear energy are reducible to a chief trade-off between the present and the future. To what extent should we take care of our produced nuclear waste and to what extent should we accept additional risks to the present generation, in order to diminish the exposure of future generation to those risks? The advocates of the open fuel cycle should explain why they are willing to transfer all the risks for a very long period of time (200,000 years) to future generations. In addition, supporters of the closed fuel cycle should underpin their acceptance of additional risks to the present generation and make the actual reduction of risk to the future plausible

Community action: value or instrument? An ethics and planning critical review

The community concept has maintained a constant and growing interest in urban studies and many related fields. The origin of this continuing interest seems to derive from the importance of the concept of community within diverse forms of political language and interpretations within different planning practices. In this contribution, through the analysis of different ethical and planning theories, we want to provide an update framework on community action. According to this objective, the argumentation will proceed through a literature review on four ethics theories and three key aspects related to spatial planning, as well as matching this theoretical analysis with exemplifying practices. The final objective is to provide an original analysis on drivers and outcomesof different forms of community, raising general issues that refer to spatial planning, social organization and regulation

Online medical crowdfunding in the United States: a cross-sectional analysis of gendered cancer campaign outcomes

This cross-sectional analysis examined online US crowdfunding campaigns from 2010–2018. Campaigns including prostate, breast, bladder, kidney, cervical, uterine, ovarian, testicular, oral, and thyroid cancers were included. Multivariable modeling was utilized to examine predictive factors for successful campaigns. A total of 1830 online cancer campaigns were included in the final analysis. Breast cancer was estimated to be the most frequent online campaign type (n = 3682), followed by cervical (n = 492), kidney (n = 475), ovarian (n = 460), and prostate cancers (n = 382). Breast cancer campaigns generated the most total funding ($15.3 million). In adjusted models, breast cancers generated significantly more donations per campaign than any other cancer. There was no difference in the average amount of funds raised per campaign by most cancer types, except for thyroid (19.4% less than breast, p < 0.001). Friend-authored campaigns generated more funding than self- and family-authored. Male cancers are under-represented, and breast cancer campaigns are disproportionately over-represented in online medical crowdfunding and generate more donations than many other cancers. Gendered differences in cancer crowdfunding are likely multifactorial and may be influenced by social networks and public health campaigns

The Cost-Effectiveness and Value of Information of Three Influenza Vaccination Dosing Strategies for Individuals with Human Immunodeficiency Virus

Influenza vaccine immunogenicity is diminished in patients living with HIV/AIDS. We evaluated the cost-effectiveness and expected value of perfect information (EVPI) of three alternative influenza vaccine dosing strategies intended to increase immunogenicity in those patients.A randomized, multi-centered, controlled, vaccine trial was conducted at 12 CIHR Canadian HIV Trials Network sites. Three dosing strategies with seasonal, inactivated trivalent, non-adjuvanted intramuscular vaccine were used in HIV infected adults: two standard doses over 28 days (Strategy A), two double doses over 28 days (Strategy B) and a single standard dose of influenza vaccine (Strategy C), administered prior to the 2008 influenza season. The comparator in our analysis was practice in the previous year, in which 82.8% of HIV/AIDS received standard-dose vaccination (Strategy D). A Markov cohort model was developed to estimate the monthly probability of Influenza-like Illness (ILI) over one influenza season. Costs and quality-adjusted life years, extrapolated to the lifetime of the hypothetical study cohorts, were estimated in calculating incremental cost-effectiveness ratios (ICER) and EVPI in conducting further research.298 patients with median CD4 of 470 cells/µl and 76% with viral load suppression were randomized. Strategy C was the most cost-effective strategy for the overall trial population and for suppressed and unsuppressed individuals. Mean ICERs for Strategy A for unsuppressed patients could also be considered cost-effective. The level of uncertainty regarding the decision to implement strategy A versus C for unsuppressed individuals was high. The maximum acceptable cost of reducing decision uncertainty in implementing strategy A for individuals with unsuppressed pVL was $418,000--below the cost of conducting a larger-scale trial.Our results do not support a policy to implement increased antigen dose or booster dosing strategies with seasonal, inactivated trivalent, non-adjuvanted intramuscular vaccine for individuals with HIV in Canada.ClinicalTrials.gov NCT00764998