6,934 research outputs found
Development of a 3D printer using scanning projection stereolithography
We have developed a system for the rapid fabrication of low cost 3D devices and systems in the laboratory with micro-scale features yet cm-scale objects. Our system is inspired by maskless lithography, where a digital micromirror device (DMD) is used to project patterns with resolution up to 10 µm onto a layer of photoresist. Large area objects can be fabricated by stitching projected images over a 5cm2 area. The addition of a z-stage allows multiple layers to be stacked to create 3D objects, removing the need for any developing or etching steps but at the same time leading to true 3D devices which are robust, configurable and scalable. We demonstrate the applications of the system by printing a range of micro-scale objects as well as a fully functioning microfluidic droplet device and test its integrity by pumping dye through the channels
Is attending lectures still relevant in engineering education?
A case study was conducted on a group of undergraduate chemical engineering students to assess the relevance of attending lectures from a student perspective and to understand why these students attend and do not attend lectures with a view to developing approaches to teaching, which are of greater interest and benefit to student learning. The students were surveyed by means of a questionnaire-type survey, which collected both quantitative and qualitative data from them. The majority of students stated that lectures are still very beneficial to their learning and are not an out-of-date mode of education. The major reasons for lecture non-attendance were time priority and curriculum overload issues with other scholarly activities and poor quality teaching. The students provided a number of suggestions to improve lectures and lecture attendance, including the incorporation of active learning in lectures, linking lectures to assessment and adding extra value to what is already in the notes
Heat capacity uncovers physics of a frustrated spin tube
We report on refined experimental results concerning the low-temperature
specific heat of the frustrated spin tube material [(CuCl2tachH)3Cl]Cl2. This
substance turns out to be an unusually perfect spin tube system which allows to
study the physics of quasi-one dimensional antiferromagnetic structures in
rather general terms. An analysis of the specific heat data demonstrates that
at low enough temperatures the system exhibits a Tomonaga-Luttinger liquid
behavior corresponding to an effective spin-3/2 antiferromagnetic Heisenberg
chain with short-range exchange interactions. On the other hand, at somewhat
elevated temperatures the composite spin structure of the chain is revealed
through a Schottky-type peak in the specific heat located around 2 K. We argue
that the dominating contribution to the peak originates from gapped magnon-type
excitations related to the internal degrees of freedom of the rung spins.Comment: 4+ pages, 6 figure
BIOMECHANICAL CHARACTERISTICS OF GRINDING IN AMERICA’S CUP SAILING
Understanding the biomechanics of a sporting movement and what aspects of the movement technique most influence performance can facilitate more specific training, both in terms of strength and conditioning and technical improvements. This study was undertaken to describe the kinetic, kinematic, and muscular activation characteristics of the grinding movement in America’s Cup sailing, a high intensity constrained cyclic movement (similar to bicycling) performed with the upper limbs
Formation of oligopeptides in high yield under simple programmable conditions
Many high-yielding reactions for forming peptide bonds have been developed but these are complex, requiring activated amino-acid precursors and heterogeneous supports. Herein we demonstrate the programmable one-pot dehydration–hydration condensation of amino acids forming oligopeptide chains in around 50% yield. A digital recursive reactor system was developed to investigate this process, performing these reactions with control over parameters such as temperature, number of cycles, cycle duration, initial monomer concentration and initial pH. Glycine oligopeptides up to 20 amino acids long were formed with very high monomer-to-oligomer conversion, and the majority of these products comprised three amino acid residues or more. Having established the formation of glycine homo-oligopeptides, we then demonstrated the co-condensation of glycine with eight other amino acids (Ala, Asp, Glu, His, Lys, Pro, Thr and Val), incorporating a range of side-chain functionality
Triceps Surae Short Latency Stretch Reflexes Contribute to Ankle Stiffness Regulation during Human Running
During human running, short latency stretch reflexes (SLRs) are elicited in the triceps surae muscles, but the function of these responses is still a matter of controversy. As the SLR is primarily mediated by Ia afferent nerve fibres, various methods have been used to examine SLR function by selectively blocking the Ia pathway in seated, standing and walking paradigms, but stretch reflex function has not been examined in detail during running. The purpose of this study was to examine triceps surae SLR function at different running speeds using Achilles tendon vibration to modify SLR size. Ten healthy participants ran on an instrumented treadmill at speeds between 7 and 15 km/h under 2 Achilles tendon vibration conditions: no vibration and 90 Hz vibration. Surface EMG from the triceps surae and tibialis anterior muscles, and 3D lower limb kinematics and ground reaction forces were simultaneously collected. In response to vibration, the SLR was depressed in the triceps surae muscles at all speeds. This coincided with short-lasting yielding at the ankle joint at speeds between 7 and 12 km/h, suggesting that the SLR contributes to muscle stiffness regulation by minimising ankle yielding during the early contact phase of running. Furthermore, at the fastest speed of 15 km/h, the SLR was still depressed by vibration in all muscles but yielding was no longer evident. This finding suggests that the SLR has greater functional importance at slow to intermediate running speeds than at faster speeds
Integrated digital/electric aircraft concepts study
The integrated digital/electrical aircraft (IDEA) is an aircraft concept which employs all electric secondary power systems and advanced digital flight control systems. After trade analysis, preferred systems were applied to the baseline configuration. An additional configuration, the alternate IDEA, was also considered. For this concept the design ground rules were relaxed in order to quantify additional synergistic benefits. It was proposed that an IDEA configuration and technical risks associated with the IDEA systems concepts be defined and the research and development required activities to reduce these risks be identified. The selected subsystems include: power generation, power distribution, actuators, environmental control system and flight controls systems. When the aircraft was resized, block fuel was predicted to decrease by 11.3 percent, with 7.9 percent decrease in direct operating cost. The alternate IDEA shows a further 3.4 percent reduction in block fuel and 3.1 percent reduction in direct operating cost
- …