Computational Fluid Dynamic Studies of Vortex Amplifier Design for the Nuclear Industry—II. Transient Conditions

In this paper computational fluid dynamics (CFD) techniques have been used to investigate the effect of changes to the geometry of a vortex amplifier (VXA) in the context of glovebox operations in the nuclear industry. These investigations were required because of anomalous behavior identified when, for operational reasons, a long-established VXA design was reduced in scale. The study simulates the transient aspects of two effects: back-flow into the glovebox through the VXA supply ports, and the precessing vortex core in the amplifier outlet. A temporal convergence error study indicates that there is little to be gained from reducing the time step duration below 0.1 ms. Based upon this criterion, the results of the simulation show that the percentage imbalance in the domain was well below the required figure of 1, and imbalances for momentum in all three axes were all below measurable values. Furthermore, there was no conclusive evidence of periodicity in the flow perturbations at the glovebox boundary, although good evidence of periodicity in the device itself and in the outlet pipe was seen. Under all conditions the modified geometry performed better than the control geometry with regard to aggregate reversed supply flow. The control geometry exhibited aggregate nonaxisymmetric supply port back-flow for almost all of the simulated period, unlike the alternative geometry for which the flow through the supply ports was positive, although still nonaxisymmetric, for most of the period. The simulations show how transient flow structures in the supply ports can cause flow to be reversed in individual ports, whereas aggregate flow through the device remains positive. Similar to the supply ports, flow through the outlet of the VXA under high swirl conditions is also nonaxisymmetric. A time-dependent reverse flow region was observed in both the outlet and the diffuser. It is possible that small vortices in the outlet, coupled with the larger vortex in the chamber, are responsible for the oscillations, which cause the shift in the axis of the precessing vortex core (and ultimately in the variations of mass flow in the individual supply ports). Field trials show that the modified geometry reduces the back-flow of oxygen into the glovebox by as much as 78. At purge rates of 0.65 m 3h the modified geometry was found to be less effective, the rate of leakage from the VXA increasing by 16-20. Despite this reduced performance, leakage from the modified geometry was still 63 less than the control geometry. © 2012 American Society of Mechanical Engineers

Phase diagrams of period-4 spin chains consisting of three kinds of spins

We study a period-4 antiferromagnetic mixed quantum spin chain consisting of three kinds of spins. When the ground state is singlet, the spin magnitudes in a unit cell are arrayed as (s-t, s, s+t, s) with integer or half-odd integer s and t (0 <= t < s). The spin Hamiltonian is mapped onto a nonlinear sigma model (NLSM) in a previously developed method. The resultant NLSM includes only two independent parameters originating from four exchange constants for fixed s and t. The topological angle in the NLSM determines the gapless phase boundaries between disordered phases in the parameter space. The phase diagrams for various s and t shows rich structures. We systematically explain the phases in the singlet-cluster-solid picture.Comment: 8 pages (16 figures included

Boundary-layer transition and global skin friction measurement with an oil-fringe imaging technique

A new oil-fringe imaging system skin friction (FISF) technique to measure skin friction on wind tunnel models is presented. In the method used to demonstrate the technique, lines of oil are applied on surfaces that connect the intended sets of measurement points, and then a wind tunnel is run so that the oil thins and forms interference fringes that are spaced in proportion to local skin friction. After a run the fringe spacings are imaged with a CCD-array digital camera and measured on a computer. Skin friction and transition measurements on a two-dimensional wing are presented and compared with computational predictions

Experimental validation of the quadratic constitutive relation in supersonic streamwise corner flows

The quadratic constitutive relation is a simple extension to the linear eddy-viscosity hypothesis and has shown some promise in improving the computation of flow along streamwise corner geometries. In order to further investigate these improvements, the quadratic model is validated by comparing RANS simulations of a Mach 2.5 wind tunnel flow with high-quality experimental velocity data. Careful set up and assessment of computations using detailed characterisation data of the overall flow field suggests a minimum expected discrepancy of approximately 3% for any experimental–computational velocity comparisons. The corner regions of the rectangular cross-section wind tunnel exhibit velocity differences of 7% between experimental data and computations with linear eddy-viscosity models, but these discrepancies are reduced to 4–5% when the quadratic constitutive relation is used. This improvement can be attributed to a better prediction of the corner boundary-layer structure, due to computations reproducing the stress-induced streamwise vortices which are known to exist in this flow field. However, the strength and position of these vortices do not correspond exactly with those in the measured flow. A further observation from this study is the appearance of additional, non-physical vortices when the value of the quadratic coefficient in the relation exceeds the recommended value of 0.3.This material is based upon work supported by the US Air Force Office of Scientific Research under award number FA9550–16–1–0430

Micro-Hall Magnetometry Studies of Thermally Assisted and Pure Quantum Tunneling in Single Molecule Magnet Mn12-Acetate

We have studied the crossover between thermally assisted and pure quantum tunneling in single crystals of high spin (S=10) uniaxial single molecule magnet Mn12-acetate using micro-Hall effect magnetometry. Magnetic hysteresis experiments have been used toinvestigate the energy levels that determine the magnetization reversal as a function of magnetic field and temperature. These experiments demonstrate that the crossover occurs in a narrow (~0.1 K) or broad (~1 K) temperature interval depending on the magnitude and direction of the applied field. For low external fields applied parallel to the easy axis, the energy levels that dominate the tunneling shift abruptly with temperature. In the presence of a transverse field and/or large longitudinal field these energy levels change with temperature more gradually. A comparison of our experimental results with model calculations of this crossover suggest that there are additional mechanisms that enhance the tunneling rate of low lying energy levels and broaden the crossover for small transverse fields.Comment: 5 pages, 5 figure

Repeat courses of intravenous alefacept in patients with chronic plaque psoriasis provide consistent safety and efficacy

Background Psoriasis is a chronic, relapsing skin disease that may require multiple treatment courses. Alefacept targets the memory T cells implicated in psoriasis pathogenesis. This open-label study evaluated the safety and tolerability, efficacy, and pharmacodynamics of repeat courses of alefacept in men and women with chronic plaque psoriasis. This article reports the interim results of this ongoing study. Methods Patients ( n  = 174) who participated in previous phase II studies of alefacept were included in this retreatment study. Intravenous alefacept (7.5 mg) was administered once weekly for 12 weeks followed by 12 weeks of observation. Initial and subsequent retreatment courses were only given when, in the opinion of the investigators, disease had returned and necessitated treatment; CD4 + T-cell counts had to be at or above the lower limit of normal. Results Adverse events were similar regardless of the retreatment course. No opportunistic infections, rebound of disease, or flares were reported. Low titers of anti-alefacept antibodies occurred in a few patients without related safety issues. Sixty-six per cent of patients achieved a ≥ 50% reduction in the Psoriasis Area and Severity Index (PASI) at any time after the first dose of retreatment course 1. Patients who received two retreatment courses ( n  = 50) had consistent or improved responses after the second course; 64% and 68% of these patients achieved a ≥ 50% PASI improvement at any time after the first dose of retreatment courses 1 and 2, respectively. Alefacept selectively reduced memory T cells without cumulative effects. Conclusions Repeat courses of alefacept were well tolerated, and subsequent retreatment courses were at least as effective as the initial course of therapy.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/65825/1/j.1365-4362.2003.01793.x.pd

An Aeroacoustic Investigation of a Tiltwing eVTOL Concept Aircraft

With the advancement in electric battery design, aircraft designers and manufacturers are no longer constrained to established configurations. Developments in Vertical Take-off and Landing (VTOL) aircraft have also been seen in recent times through the design of modern tiltrotor aircraft such as the AW609 and the V-280 Valor. The combination of these developments allowed engineers to propose designs which utilise the vertical take-off and landing capabilities of a tiltrotor aircraft with electrically driven propulsion systems, deemed eVTOL (Electrically driven Vertical Take-off and Landing). This investigation aims to develop an understanding of the aeroacoustic emissions associated with an eVTOL aircraft, due to acoustics being one of the key components in future certification. The study will consist of an investigation into the baseline design, followed by an optimisation study aiming to reduce the amount of noise generated

Performativity, fabrication and trust: exploring computer-mediated moderation

Based on research conducted in an English secondary school, this paper explores computer mediated moderation as a performative tool. The Module Assessment Meeting (MAM) was the moderation approach under investigation. I mobilise ethnographic data generated by a key informant, and triangulated with that from other actors in the setting, in order to examine some of the meanings underpinning moderation within a performative environment. Drawing on the work of Ball (2003), Lyotard (1979) and Foucault (1977, 1979), I argue that in this particular case performativity has become entrenched in teachers’ day-to-day practices, and not only affects those practices but also teachers’ sense of self. I suggest that MAM represented performative and fabricated conditions and (re)defined what the key participant experienced as a vital constituent of her educational identities - trust. From examining the case in point, I hope to have illustrated for those interested in teachers’ work some of the implications of the interface between technology and performativity

Interactions of shock tube exhaust flows with laminar and turbulent flames

The interactions of flow features emitting from open-ended shock tubes with free-standing propane flames have been investigated using high-speed schlieren imaging and high-frequency pressure measurements, with additional data from validated numerical modeling. Both compressed air-driven interactions with non-pre-mixed laminar diffusion flames (small-scale) and explosively-driven interactions with turbulent non-pre-mixed turbulent flames (large-scale) were tested for various flame locations and shock tube stagnation pressures (and therefore Mach numbers). In the small-scale tests it was observed that the flames were not significantly influenced by the passage of either the initial shock if placed close to the tube exit, or the weaker pressure waves downstream if the flame was placed further away. Four types of interaction were classified, three of which led to permanent extinguishment of the flames. The most effective mechanism of extinguishment for a flame in-line with the exhaust was the axial exhaust jet of expanding air, which served to push the flame off the fuel source either at close range (Type I) or more slowly at a distance (Type II), after which rapid cessation of combustion occurred. With the flame positioned to one side of the path of the jet, strong loop vortices achieved a similar overall outcome of extinguishment, albeit with very different flame behavior in reaction to the strong turbulence and vorticity induced by the passing flow (Type III). In all cases bar one, the disruption to the fire triangle caused by these flow effects was sufficient to extinguish – rapidly and permanently – the flame. However, at a sufficient lateral offset of the flame from the shock tube exit, the strength of rotating flow being entrained into the diffusing vortex ring was not sufficient to remove and disperse the heat from the extinguished flame (Type IV), such that re-ignition could occur. By contrast, in the large-scale tests with a significantly different shock pressure profile and a flame approximately 1 order of magnitude greater, extinguishment in all cases for all shock strengths and locations was achieved by the shock itself (accelerating combustion) and the following “blast wind” impulsively moving the flame off the fuel source, with the vortices having negligible effect at the given testing locations (Type V)