Development of a GPU-based Monte Carlo dose calculation code for coupled electron-photon transport

Monte Carlo simulation is the most accurate method for absorbed dose calculations in radiotherapy. Its efficiency still requires improvement for routine clinical applications, especially for online adaptive radiotherapy. In this paper, we report our recent development on a GPU-based Monte Carlo dose calculation code for coupled electron-photon transport. We have implemented the Dose Planning Method (DPM) Monte Carlo dose calculation package (Sempau et al, Phys. Med. Biol., 45(2000)2263-2291) on GPU architecture under CUDA platform. The implementation has been tested with respect to the original sequential DPM code on CPU in phantoms with water-lung-water or water-bone-water slab geometry. A 20 MeV mono-energetic electron point source or a 6 MV photon point source is used in our validation. The results demonstrate adequate accuracy of our GPU implementation for both electron and photon beams in radiotherapy energy range. Speed up factors of about 5.0 ~ 6.6 times have been observed, using an NVIDIA Tesla C1060 GPU card against a 2.27GHz Intel Xeon CPU processor.Comment: 13 pages, 3 figures, and 1 table. Paper revised. Figures update

The Debrisoft ® monofilament debridement pad for use in acute or chronic wounds: A NICE medical technology guidance

As part of its Medical Technology Evaluation Programme, the National Institute for Health and Care Excellence (NICE) invited a manufacturer to provide clinical and economic evidence for the evaluation of the Debrisoft ® monofilament debridement pad for use in acute or chronic wounds. The University of Birmingham and Brunel University, acting as a consortium, was commissioned to act as an External Assessment Centre (EAC) for NICE, independently appraising the submission. This article is an overview of the original evidence submitted, the EAC’s findings and the final NICE guidance issued. The sponsor submitted a simple cost analysis to estimate the costs of using Debrisoft® to debride wounds compared with saline and gauze, hydrogel and larvae. Separate analyses were conducted for applications in home and applications in a clinic setting. The analysis took an UK National Health Service (NHS) perspective. It incorporated the costs of the technologies and supplementary technologies (such as dressings) and the costs of their application by a district nurse. The sponsor concluded that Debrisoft® was cost saving relative to the comparators. The EAC made amendments to the sponsor analysis to correct for errors and to reflect alternative assumptions. Debrisoft® remained cost saving in most analyses and savings ranged from £77 to £222 per patient compared with hydrogel, from £97 to £347 compared with saline and gauze, and from £180 to £484 compared with larvae depending on the assumptions included in the analysis and whether debridement took place in a home or clinic setting. All analyses were severely limited by the available data on effectiveness, in particular a lack of comparative studies and that the effectiveness data for the comparators came from studies reporting different clinical endpoints compared with Debrisoft®. The Medical Technologies Advisory Committee made a positive recommendation for adoption of Debrisoft® and this has been published as a NICE medical technology guidance (MTG17).The Birmingham and Brunel Consortium is funded by NICE to act as an External Assessment Centre for the Medical Technologies Evaluation Programme

A high-performance 14C accelerator mass spectrometry system

Author Posting. © Arizona Board of Regents on behalf of the University of Arizona, 2010. This article is posted here by permission of Dept. of Geosciences, University of Arizona for personal use, not for redistribution. The definitive version was published in Radiocarbon 52 (2010): 228-235.A new and unique radiocarbon accelerator mass spectrometry (AMS) facility has been constructed at the Woods Hole Oceanographic Institution. The defining characteristic of the new system is its large-gap optical elements that provide a larger-than-standard beam acceptance. Such a system is ideally suited for high-throughput, high-precision measurements of 14C. Details and performance of the new system are presented

Universities and community-based research in developing countries: community voice and educational provision in rural Tanzania

The main focus of recent research on the community engagement role of universities has been in developed countries, generally in towns and cities and usually conducted from the perspectives of universities rather than the communities with which they engage. The purpose of this paper is to investigate the community engagement role of universities in the rural areas of developing countries, and its potential for strengthening the voice of rural communities. The particular focus is on the provision of primary and secondary education. The paper is based on the assumption that in order for community members to have both the capacity and the confidence to engage in political discourse for improving educational capacity and quality, they need the opportunity to become involved and well-versed in the options available, beyond their own experience. Particular attention is given in the paper to community-based research (CBR). CBR is explored from the perspectives of community members and local leaders in the government-community partnerships which have responsibility for the provision of primary and secondary education in rural Tanzania. The historical and policy background of the partnerships, together with findings from two case studies, provide the context for the paper

Developing an intervention to facilitate family communication about inherited genetic conditions, and training genetic counsellors in its delivery.

Many families experience difficulty in talking about an inherited genetic condition that affects one or more of them. There have now been a number of studies identifying the issues in detail, however few have developed interventions to assist families. The SPRinG collaborative have used the UK Medical Research Council's guidance on Developing and Evaluating Complex Interventions, to work with families and genetic counsellors (GCs) to co-design a psycho-educational intervention to facilitate family communication and promote better coping and adaptation to living with an inherited genetic condition for parents and their children (<18 years). The intervention is modelled on multi-family discussion groups (MFDGs) used in psychiatric settings. The MFDG was developed and tested over three phases. First focus groups with parents, young people, children and health professionals discussed whether MFDG was acceptable and proposed a suitable design. Using evidence and focus group data, the intervention and a training manual were developed and three GCs were trained in its delivery. Finally, a prototype MFDG was led by a family therapist and co-facilitated by the three GCs. Data analysis showed that families attending the focus groups and intervention thought MFDG highly beneficial, and the pilot sessions had a significant impact on their family' functioning. We also demonstrated that it is possible to train GCs to deliver the MFDG intervention. Further studies are now required to test the feasibility of undertaking a definitive randomised controlled trial to evaluate its effectiveness in improving family outcomes before implementing into genetic counselling practice.The National Institute of Health Research funded the study but any views expressed do not necessarily reflect those of the Authority. Funded by NIHR reference number: RP-DG-1211-10015

A European lens upon adult and lifelong learning in Asia

In this article, we seek to assess the extent to which adult and lifelong learning policies and practices in Asia have distinctiveness by comparison to those found in western societies, through an analysis of inter-governmental, national and regional policies in the field. We also inform our study through the analysis of the work of organisations with an international remit with a specific focus on Asia and Europe. In one case, the Asia–Europe Meeting Lifelong Learning (ASEM LLL) Hub has a specific function of bringing together researchers in Asia and Europe. In another, the PASCAL Observatory has had a particular focus on one aspect of lifelong learning, that of learning cities, with a concentration in its work on Asia and Europe. We focus on learning city development as a particular case of distinction in the field. We seek to identify the extent to which developments in the field in Asia have influenced and have been influenced by practices elsewhere in world, especially in Europe, and undertake our analysis using theories of societal learning/the learning society, learning communities and life-deep learning. We complement our analysis through assessment of material contained in three dominant journals in the field, the International Journal of Lifelong Education, the International Review of Education and Adult Education Quarterly, each edited in the west

Mechanisms and Difference-Making

I argue that difference-making should be a crucial element for evaluating the quality of evidence for mechanisms, especially with respect to the robustness of mechanisms, and that it should take central stage when it comes to the general role played by mechanisms in establishing causal claims in medicine. The difference- making of mechanisms should provide additional compelling reasons to accept the gist of Russo-Williamson thesis and include mechanisms in the protocols for Evidence- Based Medicine (EBM), as the EBM+ research group has been advocatin

Men, maternity and moral residue:negotiating the moral demands of the transition to first time fatherhood

This article discusses men's transition to first time fatherhood, with a focus on the way they recognise various in-tension moral demands and negotiate an appropriate role for themselves. The findings are taken from a longitudinal study, drawing on elements of grounded theory, comprising a series of face-to-face and telephone interviews with 11 men over a 9-month period from the 12(th) week of pregnancy to 8 weeks after the birth. The analysis focuses on men's feelings and experience of exclusion and participation, and their response and reaction to that experience. The findings present two descriptive themes, ‘on the inside looking in’ and ‘present but not participating’, followed by third theme ‘deference and support: a moral response’ that exposes the dilemmatic nature of men's experience and explains the participants’ apparent acceptance of being less involved. The discussion explores the concept of moral residue, arguing that while deference and support may be an appropriate role for fathers in the perinatal period it may also be a compromise that leads to feelings of uncertainty and frustration, which is a consequence of being in a genuinely dilemmatic situation

Where’s WALY? : A proof of concept study of the ‘wellbeing adjusted life year’ using secondary analysis of cross-sectional survey data

Background The Quality-Adjusted Life Year (QALY) is a measure that combines life extension and health improvement in a single score, reflecting preferences around different types of health gain. It can therefore be used to inform decision-making around allocation of health care resources to mutually exclusive options that would produce qualitatively different health benefits. A number of quality-of-life instruments can be used to calculate QALYs. The EQ-5D is one of the most commonly used, and is the preferred option for submissions to NICE (https://www.nice.org.uk/process/pmg9/). However, it has limitations that might make it unsuitable for use in areas such as public and mental health where interventions may aim to improve well-being. One alternative to the QALY is a Wellbeing-Adjusted Life Year. In this study we explore the need for a Wellbeing-Adjusted Life Year measure by examining the extent to which a measure of wellbeing (the Warwick-Edinburgh Mental Well-being Scale) maps onto the EQ-5D-3L. Methods Secondary analyses were conducted on data from the Coventry Household Survey in which 7469 participants completed the EQ-5D-3L, Warwick-Edinburgh Mental Well-being Scale, and a measure of self-rated health. Data were analysed using descriptive statistics, Pearson’s and Spearman’s correlations, linear regression, and receiver operating characteristic curves. Results Approximately 75 % of participants scored the maximum on the EQ-5D-3L. Those with maximum EQ-5D-3L scores reported a wide range of levels of mental wellbeing. Both the Warwick-Edinburgh Mental Well-being Scale and the EQ-5D-3L were able to detect differences between those with higher and lower levels of self-reported health. Linear regression indicated that scores on the Warwick-Edinburgh Mental Well-being Scale and the EQ-5D-3L were weakly, positively correlated (with R2 being 0.104 for the index and 0.141 for the visual analogue scale). Conclusion The Warwick-Edinburgh Mental Well-being Scale maps onto the EQ-5D-3L to only a limited extent. Levels of mental wellbeing varied greatly amongst participants who had the maximum score on the EQ-5D-3L. To evaluate the relative effectiveness of interventions that impact on mental wellbeing, a new measure – a Wellbeing Adjusted Life Year – is needed

Inorganic hydrophobic coatings: Surfaces mimicking the nature

Added value products are being developed in ceramic industry. Different optical effects as bright metallic shine or new functionalities as hydrophobicity or bactericide characteristics are the new properties searched on the tiles. In this study, we prepare glassy coatings for tiles based on copper pigment by a conventional industrial process. The obtained coatings present different aesthetical aspects, including bright metallic aspect which confers a high decorative value to the tile. Furthermore, these metallic coatings present hydrophobic properties with contact angles with water as high as 115 degrees and also bactericide characteristics. Superficial microstructure and nanoparticles were found in the bactericide-hydrophobic samples, resembling the surface of hydrophobic leaf surfaces. This structure was formed by the crystallization of CuO nanoparticles as Tenorite due to the copper saturation of the glassy matrix at the surface of the coatings