Phase Change Materials for Thermal Management of Kennedy Library Study Rooms

The overall purpose of this study was to find a phase change material (PCM) or a combination of PCMs as a thermal management solution for the fifth-floor study rooms in Kennedy Library. First and foremost, the PCM must take in heat to change phase. A PCM would be a better candidate the more heat it needs to change phase. To quantify this, the team utilized a DSC to find how much energy each candidate PCM required to change phase. Coconut oil, palm oil, and white chocolate were found to have the best ability to absorb heat. Secondly, the PCM should not hinder a study environment by blocking much light entering a room or having a dull color. Most of the team’s candidate PCMs had intriguing colors or phase transition already, but the anhydrous salt was a dull color that didn’t change during the phase transition. To aid the aesthetic appeal of this candidate PCM, an XRF and XRD were used to introduce F-center defects to change the color of the salt. This failed to produce a color change in the salt. The final step for the project is implementation. The team involved several architecture members whose tasks were to find a housing system for the final PCM(s). Glass tiles with a hollow space inside to house the PCM is the team’s proposed solution

The influence of fetal sex on patterns of change in anti-Mullerian hormone during pregnancy

Maternal anti-mullerian hormone declines sharply between 13-15 weeks, likely as a result of feto-placental signaling. Fetal AMH levels are known to be widely disparate after the first trimester, with high levels in male and absent levels in female. However, it is unclear as to whether differing fetal AMH levels influence the pattern of change of maternal AMH. Our objective was to examine AMH throughout gestation to determine if the maternal concentration varies according to the gender of the fetus

Time-varying Entry Heating Profile Replication with a Rotating Arc Jet Test Article

A new approach for arc jet testing of thermal protection materials at conditions approximating the time-varying conditions of atmospheric entry was developed and demonstrated. The approach relies upon the spatial variation of heat flux and pressure over a cylindrical test model. By slowly rotating a cylindrical arc jet test model during exposure to an arc jet stream, each point on the test model will experience constantly changing applied heat flux. The predicted temporal profile of heat flux at a point on a vehicle can be replicated by rotating the cylinder at a prescribed speed and direction. An electromechanical test model mechanism was designed, built, and operated during an arc jet test to demonstrate the technique

SPRITE: A TPS Test Bed for Ground and Flight

Engineers in the Entry Systems and Technology Division at NASA Ames Research Center developed a fully instrumented, small atmospheric entry probe called SPRITE (Small Probe Reentry Investigation for TPS Engineering). SPRITE, conceived as a flight test bed for thermal protection materials, was tested at full scale in an arc-jet facility so that the aerothermal environments the probe experiences over portions of its flight trajectory and in the arc-jet are similar. This ground-to-flight traceability enhances the ability of mission designers to evaluate margins needed in the design of thermal protection systems (TPS) of larger scale atmospheric entry vehicles

X-Ray Computed Tomography Inspection of the Stardust Heat Shield

The "Stardust" heat shield, composed of a PICA (Phenolic Impregnated Carbon Ablator) Thermal Protection System (TPS), bonded to a composite aeroshell, contains important features which chronicle its time in space as well as re-entry. To guide the further study of the Stardust heat shield, NASA reviewed a number of techniques for inspection of the article. The goals of the inspection were: 1) to establish the material characteristics of the shield and shield components, 2) record the dimensions of shield components and assembly as compared with the pre-flight condition, 3) provide flight infonnation for validation and verification of the FIAT ablation code and PICA material property model and 4) through the evaluation of the shield material provide input to future missions which employ similar materials. Industrial X-Ray Computed Tomography (CT) is a 3D inspection technology which can provide infonnation on material integrity, material properties (density) and dimensional measurements of the heat shield components. Computed tomographic volumetric inspections can generate a dimensionally correct, quantitatively accurate volume of the shield assembly. Because of the capabilities offered by X-ray CT, NASA chose to use this method to evaluate the Stardust heat shield. Personnel at NASA Johnson Space Center (JSC) and Lawrence Livermore National Labs (LLNL) recently performed a full scan of the Stardust heat shield using a newly installed X-ray CT system at JSC. This paper briefly discusses the technology used and then presents the following results: 1. CT scans derived dimensions and their comparisons with as-built dimensions anchored with data obtained from samples cut from the heat shield; 2. Measured density variation, char layer thickness, recession and bond line (the adhesive layer between the PICA and the aeroshell) integrity; 3. FIAT predicted recession, density and char layer profiles as well as bondline temperatures Finally suggestions are made as to future uses of this technology as a tool for non-destructively inspecting and verifying both pre and post flight heat shields

Antigen Sensitization Influences Organophosphorus Pesticide–Induced Airway Hyperreactivity

BackgroundRecent epidemiologic studies have identified organophosphorus pesticides (OPs) as environmental factors potentially contributing to the increase in asthma prevalence over the last 25 years. In support of this hypothesis, we have demonstrated that environmentally relevant concentrations of OPs induce airway hyperreactivity in guinea pigs.ObjectivesSensitization to allergen is a significant contributing factor in asthma, and we have shown that sensitization changes virus-induced airway hyperreactivity from an eosinophil-independent mechanism to one mediated by eosinophils. Here, we determine whether sensitization similarly influences OP-induced airway hyperreactivity.MethodsNonsensitized and ovalbumin-sensitized guinea pigs were injected subcutaneously with the OP parathion (0.001-1.0 mg/kg). Twenty-four hours later, animals were anesthetized and ventilated, and bronchoconstriction was measured in response to either vagal stimulation or intravenous acetylcholine. Inflammatory cells and acetylcholinesterase activity were assessed in tissues collected immediately after physiologic measurements.ResultsOvalbumin sensitization decreased the threshold dose for parathion-induced airway hyperreactivity and exacerbated parathion effects on vagally induced bronchoconstriction. Pretreatment with antibody to interleukin (IL)-5 prevented parathion-induced hyperreactivity in sensitized but not in nonsensitized guinea pigs. Parathion did not increase the number of eosinophils in airways or the number of eosinophils associated with airway nerves nor did it alter eosinophil activation as assessed by major basic protein deposition.ConclusionsAntigen sensitization increases vulnerability to parathion-induced airway hyperreactivity and changes the mechanism to one that is dependent on IL-5. Because sensitization to allergens is characteristic of 50% of the general population and 80% of asthmatics (including children), these findings have significant implications for OP risk assessment, intervention, and treatment strategies

Dexmedetomidine reduces shivering during mild hypothermia in waking subjects

Background and Purpose Reducing body temperature can prolong tolerance to ischemic injury such as stroke or myocardial infarction, but is difficult and uncomfortable in awake patients because of shivering. We tested the efficacy and safety of the alpha-2-adrenergic agonist dexmedetomidine for suppressing shivering induced by a rapid infusion of cold intravenous fluids. Methods Ten subjects received a rapid intravenous infusion of two liters of cold (4°C) isotonic saline on two separate test days, and we measured their core body temperature, shivering, hemodynamics and sedation for two hours. On one test day, fluid infusion was preceded by placebo infusion. On the other test day, fluid infusion was preceded by 1.0 μg/kg bolus of dexmedetomidine over 10 minutes. Results All ten subjects experienced shivering on placebo days, with shivering beginning at a mean (SD) temperature of 36.6 (0.3)°C. The mean lowest temperature after placebo was 36.0 (0.3) °C (range 35.7-36.5°C). Only 3/10 subjects shivered on dexmedetomidine days, and the mean lowest temperature was 35.7 (0.4) °C (range 35.0-36.3°C). Temperature remained below 36°C for the full two hours in 6/10 subjects. After dexmedetomidine, subjects had moderate sedation and a mean 26 (13) mmHg reduction in blood pressure that resolved within 90 minutes. Heart rate declined a mean 23 (11) bpm after both placebo and dexmedetomidine. Dexmedetomidine produced no respiratory depression. Conclusion Dexmedetomidine decreases shivering in normal volunteers. This effect is associated with decreased systolic blood pressure and sedation, but no respiratory depression. Copyright

Multi-site investigation of strategies for the clinical implementation of CYP2D6 genotyping to guide drug prescribing

PURPOSE: A number of institutions have clinically implemented CYP2D6 genotyping to guide drug prescribing. We compared implementation strategies of early adopters of CYP2D6 testing, barriers faced by both early adopters and institutions in the process of implementing CYP2D6 testing, and approaches taken to overcome these barriers. METHODS: We surveyed eight early adopters of CYP2D6 genotyping and eight institutions in the process of adoption. Data were collected on testing approaches, return of results procedures, applications of genotype results, challenges faced, and lessons learned. RESULTS: Among early adopters, CYP2D6 testing was most commonly ordered to assist with opioid and antidepressant prescribing. Key differences among programs included test ordering and genotyping approaches, result reporting, and clinical decision support. However, all sites tested for copy-number variation and nine common variants, and reported results in the medical record. Most sites provided automatic consultation and had designated personnel to assist with genotype-informed therapy recommendations. Primary challenges were related to stakeholder support, CYP2D6 gene complexity, phenotype assignment, and sustainability. CONCLUSION: There are specific challenges unique to CYP2D6 testing given the complexity of the gene and its relevance to multiple medications. Consensus lessons learned may guide those interested in pursuing similar clinical pharmacogenetic programs

Face Value: The Rhetoric of Facial Disfigurement in American Film and Popular Culture, 1917-27

This is the author accepted manuscript. The final version is available from Taylor & Francis via the DOI in this record.The return of facially disfigured men from the trenches of World War One occasioned a muted public reaction in the US. However, this article will show that burgeoning discourses concerning plastic surgery in the US also generated a significant reaction in the popular press, and that these were reflected, too, in several feature films dealing with facial surgery on disfigured veterans. Though several of these films depicted miraculous transformations occasioned by the surgeons, Robert Florey’s 1927 film, Face Value, focused on an American veteran with facial scarring that could not be repaired. The article will argue that this film drew strongly upon the increasingly prominent public presence of the gueules cassées in the US during 1926 and 1927. Depicting gueules cassées and their facial injuries prominently in several scenes, the film brought to attention difficult questions concerning the futures of such men, which the US media had hitherto rarely addressed