15,137 research outputs found
Computer program simulates design, test, and analysis phases of sensitivity experiments
Modular program with a small main program and several specialized subroutines provides a general purpose computer program to simulate the design, test and analysis phases of sensitivity experiments. This program allows a wide range of design-response function combinations and the addition, deletion, or modification of subroutines
A cryocooler for applications requiring low magnetic and mechanical interference
A very low-power, low-interference Stirling cryocooler is being developed based on principles and techniques described in several previous publications over the last four years. It differs in several important details from those built previously. It uses a tapered displacer based upon an analytical optimization procedure. The displacer is driven by an auxiliary piston and cylinder (rather than by mechanical linkage) using some of the working fluid itself to provide the driving force. This provides smooth, vibration-free motion, and, more importantly, allows complete mechanical and spatial separation of the cryostat from the pressure-wave generator. Either of two different pressure-wave generators can be used. One is a non-contaminating, unlubricated ceramic piston and cylinder. The other is a compressed-air-operated rubber diaphragm with motor-driven valves to cycle the pressure between appropriate limits
The intergenerational correlation in AFDC participation: Welfare trap or poverty trap?
Several recent studies have shown that daughters whose mothers have participated in the welfare program Aid to Families with Dependent Children (AFDC), are themselves more likely to participate in AFDC when they head their own household. Other studies have shown that the earnings of parents and their children are highly correlated across generations. This suggests that any variable correlated with income such as AFDC participation will also be correlated across generations. This paper uses data from the original and youth cohorts of the National Longitudinal Surveys to investigate the question of whether the link in mother-daughter welfare participation is a causal relationship, or whether it can be explained by the expected intergenerational correlation in earnings. Several reduced-form probit equations are estimated, and attention is directed to the potential endogeneity of key explanatory variables. The empirical findings suggest that much of the observed correlation in AFDC participation across generations can be explained by the intergenerational correlation of income and other family characteristics.
An empirical analysis of the welfare magnet debate using the NLSY
This paper examines the extent to which differences in welfare generosity across states lead to interstate migration. Using microdata from the National Longitudinal Survey of Youth between 1979 and 1992, we employ a quasi-experimental design that utilizes the categorical eligibility of the welfare system. The "treatment" group consists of all those in the survey who appear eligible to participate in Aid to Families with Dependent Children. The "control" group contains those who are poor but ineligible for other reasons. The pattern of cross-state moves among poor single women with children who are likely to be eligible for benefits (treatment-group members) is compared to the pattern among other poor households. We find little evidence indicating that welfare-induced migration is a widespread phenomenon.
Evaluation of a metal shear web selectively reinforced with filamentary composites for space shuttle application. Phase 1 summary report: Shear web design development
An advanced composite shear web design concept was developed for the Space Shuttle orbiter main engine thrust beam structure. Various web concepts were synthesized by a computer-aided adaptive random search procedure. A practical concept is identified having a titanium-clad + or - 45 deg boron/epoxy web plate with vertical boron/epoxy reinforced aluminum stiffeners. The boron-epoxy laminate contributes to the strength and stiffness efficiency of the basic web section. The titanium-cladding functions to protect the polymeric laminate parts from damaging environments and is chem-milled to provide reinforcement in selected areas. Detailed design drawings are presented for both boron/epoxy reinforced and all-metal shear webs. The weight saving offered is 24% relative to all-metal construction at an attractive cost per pound of weight saved, based on the detailed designs. Small scale element tests substantiate the boron/epoxy reinforced design details in critical areas. The results show that the titanium-cladding reliably reinforces the web laminate in critical edge load transfer and stiffener fastener hole areas
An approach to optimization of low-power Stirling cryocoolers
A method for optimizing the design (shape of the displacer) of low power Stirling cryocoolers relative to the power required to operate the systems is described. A variational calculation which includes static conduction, shuttle and radiation losses, as well as regenerator inefficiency, was completed for coolers operating in the 300 K to 10 K range. While the calculations apply to tapered displacer machines, comparison of the results with stepped displacer cryocoolers indicates reasonable agreement
Fabrication and Electrical Characterization of Fully CMOS Si Single Electron Devices
We present electrical data of silicon single electron devices fabricated with
CMOS techniques and protocols. The easily tuned devices show clean Coulomb
diamonds at T = 30 mK and charge offset drift of 0.01 e over eight days. In
addition, the devices exhibit robust transistor characteristics including
uniformity within about 0.5 V in the threshold voltage, gate resistances
greater than 10 G{\Omega}, and immunity to dielectric breakdown in electric
fields as high as 4 MV/cm. These results highlight the benefits in device
performance of a fully CMOS process for single electron device fabrication.Comment: 7 pages, 7 figure
Self-Regulation in a Web-Based Course: A Case Study
Little is known about how successful students in Web-based courses self-regulate their learning. This descriptive case study used a social cognitive model of self-regulated learning (SRL) to investigate how six graduate students used and adapted traditional SRL strategies to complete tasks and cope with challenges in a Web-based technology course; it also explored motivational and environmental influences on strategy use. Primary data sources were three transcribed interviews with each of the students over the course of the semester, a transcribed interview with the course instructor, and the students’ reflective journals. Archived course documents, including transcripts of threaded discussions and student Web pages, were secondary data sources. Content analysis of the data indicated that these students used many traditional SRL strategies, but they also adapted planning, organization, environmental structuring, help seeking, monitoring, record keeping, and self-reflection strategies in ways that were unique to the Web-based learning environment. The data also suggested that important motivational influences on SRL strategy use—self-efficacy, goal orientation, interest, and attributions—were shaped largely by student successes in managing the technical and social environment of the course. Important environmental influences on SRL strategy use included instructor support, peer support, and course design. Implications for online course instructors and designers, and suggestions for future research are offered
Intrinsic Metastabilities in the Charge Configuration of a Double Quantum Dot
We report a thermally activated metastability in a GaAs double quantum dot
exhibiting real-time charge switching in diamond shaped regions of the charge
stability diagram. Accidental charge traps and sensor back action are excluded
as the origin of the switching. We present an extension of the canonical double
dot theory based on an intrinsic, thermal electron exchange process through the
reservoirs, giving excellent agreement with the experiment. The electron spin
is randomized by the exchange process, thus facilitating fast, gate-controlled
spin initialization. At the same time, this process sets an intrinsic upper
limit to the spin relaxation time.Comment: 4 pages, 5 figures (color
- …