A Descriptive Study of the Population Dynamics of Adult \u3ci\u3eDiabrotica Virgifera Virgifera\u3c/i\u3e (Coleoptera: Chrysomelidae) in Artificially Infested Corn Fields

The influence of corn plant phenology on the dynamics of adult western corn rootworm, Diabrotica virgifera virgifera, populations was studied during 1988 and 1989 in com fields artificially infested with eggs. Fifty percent of adult emergence from the soil occurred by day 194 in 1988 and day 203 in 1989. In both years, adult emergence was synchronized with corn flowering, eggs were recovered in soil samples approximately four days after reproductive females were first observed in the population, and oviposition was essentially complete about 25 days after it began. The number of reproductive female beetle-days accumulating per m2 was similar in both years. Approximately two times as many eggs were laid in 1988 (1239 eggs 1m2) as in 1989 (590 eggs 1m2). The difference in egg density may have been caused by differences among years in the temporal synchrony of reproductive beetles with flowering corn. Daily survival rates of adults were high while corn was flowering; exhibited a gradual decline during grain filling; and decreased rapidly during the grain drying stage

Vacuum Energy Density for Massless Scalar Fields in Flat Homogeneous Spacetime Manifolds with Nontrivial Topology

Although the observed universe appears to be geometrically flat, it could have one of 18 global topologies. A constant-time slice of the spacetime manifold could be a torus, Mobius strip, Klein bottle, or others. This global topology of the universe imposes boundary conditions on quantum fields and affects the vacuum energy density via Casimir effect. In a spacetime with such a nontrivial topology, the vacuum energy density is shifted from its value in a simply-connected spacetime. In this paper, the vacuum expectation value of the stress-energy tensor for a massless scalar field is calculated in all 17 multiply-connected, flat and homogeneous spacetimes with different global topologies. It is found that the vacuum energy density is lowered relative to the Minkowski vacuum level in all spacetimes and that the stress-energy tensor becomes position-dependent in spacetimes that involve reflections and rotations.Comment: 25 pages, 11 figure

Evidence for Adsorption of Chlorine Species on Iron(III) (hydr)oxides in the Sheepbed Mudstone, Gale Crater, Mars

Chlorine is a widespread element on Mars present in dust, soils and rocks, including the Sheepbed mudstone at Yellowknife Bay, Gale crater. Combined elemental and volatile analyses of two drilled samples, Cumberland and John Klein, indicated that chloride (Cl-) and perchlorate (ClO4 -) are likely present in the mudstone. The nature of chlorine species in Sheepbed mudstone is still not well constrained. It has been proposed that both are present as amorphous or crystalline salts physically mixed with mudstone minerals. We alternatively hypothesize that adsorbed perchlorate and chloride exist in the mudstone and adsorption could occur, in particular, on Fe(III) (hydr)oxide phases as supported by laboratory observations on terrestrial materials. Mineralogical and compositional analyses of the drilled Cumberland mudstone sample revealed the presence of ~30 wt% of a Fe-rich X-ray amorphous phase. Ferrihydrite has been proposed as a component of the Fe-rich X-ray amorphous material. The objectives of this work were to determine adsorption of perchlorate and chloride on ferrihydrite and to enable data comparison by characterizing adsorbed chloride and perchlorate with thermal and evolved gas analysis run under operating conditions similar to the SAM instrument onboard the Curiosity rover

Improving Monolithic Perovskite Silicon Tandem Solar Cells From an Optical Viewpoint

Perovskite silicon tandem solar cells are the most promising concept for a future photovoltaic technology. We report on recent progress from an optical viewpoint and disucss how we achieved more than 25 device efficienc

It is Hobbes, not Rousseau:an experiment on voting and redistribution

We perform an experiment which provides a laboratory replica of some important features of the welfare state. In the experiment, all individuals in a group decide whether to make a costly effort, which produces a random (independent) outcome for each one of them. The group members then vote on whether to redistribute the resulting and commonly known total sum of earnings equally amongst themselves. This game has two equilibria, if played once. In one of them, all players make effort and there is little redistribution. In the other one, there is no effort and nothingWe thank Iris Bohnet, Tim Cason, David Cooper, John Duffy, Maia Guell, John Van Huyck and Robin Mason for helpful conversations and encouragement. The comments of the Editor and two referees helped improve the paper. We gratefully acknowledge the financial support from Spain’s Ministry of Science and Innovation under grants CONSOLIDER INGENIO 2010 CSD2006-0016 (all authors), ECO2009-10531 (Cabrales), ECO2008-01768 (Nagel) and the Comunidad de Madrid under grant Excelecon (Cabrales), the Generalitat de Catalunya and the CREA program (Nagel), and project SEJ2007-64340 of Spain’s Ministerio de Educación y Ciencia (Rodríguez Mora).Publicad

High-speed FPGA 10's complement adders-subtractors

This paper first presents a study on the classical BCD adders from which a carry-chain type adder is redesigned to fit within the Xilinx FPGA's platforms. Some new concepts are presented to compute the P and G functions for carry-chain optimization purposes. Several alternative designs are presented. Then, attention is given to FPGA implementations of add/subtract algorithms for 10's complement BCD numbers. Carry-chain type circuits have been designed on 4-input LUTs (Virtex-4, Spartan-3) and 6-input LUTs (Virtex-5) Xilinx FPGA platforms. All designs are presented with the corresponding time performance and area consumption figures. Results have been compared to straight implementations of a decimal ripple-carry adder and an FPGA 2's complement binary adder-subtractor using the dedicated carry logic, both carried out on the same platform. Better time delays have been registered for decimal numbers within the same range of operands.This work is supported by the Universities FASTA, Mar del Plata, Argentina, UNCPBA Tandil, Argentina, UAM ,Madrid, Spain, and URV, Tarragona, Spain; it has been partially granted by the CICYT of Spain under contract TEC2007- 68074-C02-02/MIC

The Investigation of Chlorate and Perchlorate/Saponite Mixtures as a Possible Source of Oxygen and Chlorine Detected by the Sample Analysis at Mars (SAM) Instrument in Gale Crater

The Sample Analysis at Mars (SAM) instrument on board the Curiosity Rover has detected O2 and HCl gas releases from all analyzed Gale Crater sediments, which are attributed to the presence of perchlorates and/or chlorates in martian sediment. Previous SAM analog laboratory analyses found that most pure perchlorates and chlorates release O2 and HCl at different temperatures than those observed in the SAM data. Subsequent studies examined the effects of perchlorate and chlorate mixtures with Gale Crater analog iron phases, which are known to catalyze oxychlorine decomposition. Several mixtures produced O2 releases at similar temperatures as Gale Crater materials, but most of these mixtures did not produce significant HCl releases comparable to those detected by the SAM instrument. In order to better explain the Gale Crater HCl releases, perchlorates and chlorates were mixed with Gale Crater analog saponite, which is found at abundances from 8 to 20 wt % in the John Klein and Cumberland drill samples. Mixtures of chlorates or perchlorates with calcium-saponite or ferrian-saponite were heated to 1000 deg C in a Labsys EVO differential scanning calorimeter/mass spectrometer configured to operate similarly to the SAM oven/quadrupole mass spectrometer system. Our results demonstrate that all chlorate and perchlorate mixtures produce significant HCl releases below 1000 deg C as well as depressed oxygen peak release temperatures when mixed with saponite. The type of saponite (calcium or ferrian saponite) did not affect the evolved gas results significantly. Saponite/Mg-perchlorate mixtures produced two HCl releases similar to the Cumberland drilled sample. Mg-chlorate mixed with saponite produced HCl releases similar to the Big Sky drilled sample in an eolian sandstone. A mixture of Ca-perchlorate and saponite produced HCl and oxygen releases similar to the Buckskin mudstone drilled sample and the Gobabeb 2 eolian dune material. Ca-chlorate mixed with saponite produced both HCl and oxygen releases within the same range as the Rock-nest windblown deposit, the Greenhorn eolian sandstone, and the John Klein drilled mudstone. Overall, mixtures of perchlorates or chlorates with saponite provide the first explanation for the high temperature HCl releases in addition to the oxygen releases observed in Gale Crater materials

Visualization of respiratory flows from 3D reconstructed alveolar airspaces using X-ray tomographic microscopy

A deeper knowledge of the three-dimensional (3D) structure of the pulmonary acinus has direct applications in studies on acinar fluid dynamics and aerosol kinematics. To date, however, acinar flow simulations have been often based on geometrical models inspired by morphometrical studies; limitations in the spatial resolution of lung imaging techniques have prevented the simulation of acinar flows using 3D reconstructions of such small structures. In the present study, we use high-resolution, synchrotron radiation-based X-ray tomographic microscopy (SRXTM) images of the pulmonary acinus of a mouse to reconstruct 3D alveolar airspaces and conduct computational fluid dynamic (CFD) simulations mimicking rhythmic breathing motion. Respiratory airflows and Lagrangian (massless) particle tracking are visualized in two examples of acinar geometries with varying size and complexity, representative of terminal sacculi including their alveoli. The present CFD simulations open the path towards future acinar flow and aerosol deposition studies in complete and anatomically realistic multi-generation acinar trees using reconstructed 3D SRXTM geometries