165,443 research outputs found
Subsonic finite elements for wing body combinations
Capabilities, limitations, and applications of various theories for the prediction of wing-body aerodynamics are reviewed. The methods range from approximate planar representations applicable in preliminary design to surface singularity approaches applicable in the later stages of detail design. The available methods for three-dimensional configurations are limited as inviscid solutions with viscous effects included on an empirical or strip basis
Thermoacoustic refrigeration
A new refrigerator which uses resonant high amplitude sound in inert gases to pump heat is described and demonstrated. The phasing of the thermoacoustic cycle is provided by thermal conduction. This 'natural' phasing allows the entire refrigerator to operate with only one moving part (the loudspeaker diaphragm). The thermoacoustic refrigerator has no sliding seals, requires no lubrication, uses only low-tolerance machine parts, and contains no expensive components. Because the compressor moving mass is typically small and the oscillation frequency is high, the small amount of vibration is very easily isolated. This low vibration and lack of sliding seals makes thermoacoustic refrigeration an excellent candidate for food refrigeration and commercial/residential air conditioning applications. The design, fabrication, and performance of the first practical, autonomous thermoacoustic refrigerator, which will be flown on the Space Shuttle (STS-42), are described, and designs for terrestrial applications are presented
Pollution Prevention and Business Management. Curricula for Schools of Business and Public Health. Volume 1: Modules 1-3
These instructional modules are based on the premise that sustained economic development is
dependent upon sustained protection ofthe environment. They also reflect the fact that preventing
waste is far more cost effective than managing the waste once it is generated. Pollution prevention
not only offers businesses a competitive opportunity, it is a natural extension of sound management
practices. Incorporating pollution prevention into business management and government regulation
will enhance longterm economic prosperity.published or submitted for publicatio
Nucleation and growth of a quasicrystalline monolayer: Bi adsorption on the five-fold surface of i-Al70Pd21Mn9
Scanning tunnelling microscopy has been used to study the formation of a Bi
monolayer deposited on the five-fold surface of i-Al70Pd21Mn9. Upon deposition
of low sub-monolayer coverages, the nucleation of pentagonal clusters of Bi
adatoms of edge length 4.9 A is observed. The clusters have a common
orientation leading to a film with five-fold symmetry. By inspection of images
where both the underlying surface and the Bi atoms are resolved, the pentagonal
clusters are found to nucleate on pseudo-Mackay clusters truncated such that a
Mn atom lies centrally in the surface plane. The density of these sites is
sufficient to form a quasiperiodic framework, and subsequent adsorption of Bi
atoms ultimately leads to the formation of a quasicrystalline monolayer. The
initial nucleation site is different to that proposed on the basis of recent
density functional theory calculations.Comment: 6 pages, 5 figure
Recommended from our members
Death after closed adolescent knee injury and popliteal artery occlusion: a case report and clinical review.
A healthy adolescent male soccer player sustained a radiograph-negative, effusion-negative physeal injury of the proximal tibia from a ground-level fall with traumatic occlusion of the popliteal artery. Orthopaedic evaluation and arteriography were delayed for 72 hours after the injury. He arrived at a tertiary referral center in multisystem organ failure secondary to lower extremity ischemic necrosis, septic pulmonary thromboembolism, and systemic shock. Emergent medical evaluation, a high index of suspicion, and a careful neurovascular examination are imperative after every closed knee injury in the young athlete
Dustbuster: a compact impact-ionization time-of-flight mass spectrometer for in situ analysis of cosmic dust
We report on the design and testing of a compact impact-ionization time-of-flight mass spectrometer for analysis of cosmic dust, suitable for use on deep space missions. The instrument, Dustbuster, incorporates a large target area with a reflectron, simultaneously optimizing mass resolution, particle detection, and ion collection. Dust particles hit the 65-cm2 target plate and are partially ionized by the impact. The resulting ions, with broad energy and angular distributions, are accelerated through a modified reflectron, focusing ions of specific m/z in space and time to produce high-resolution mass spectra. The cylindrically symmetric instrument is 10 cm in diameter and 20 cm in length, considerably smaller than previous in situ dust analyzers, and can be easily scaled as needed for specific mission requirements. Laser desorption ionization of metal and mineral samples embedded in the impact plate simulated particle impacts for evaluations of instrument performance. Mass resolution in these experiments ranged from 60–180, permitting resolution of isotopes. The mass spectrometer can be combined with other instrument components to determine dust particle trajectories and sizes
Summary of low-speed longitudinal aerodynamics of two powered close-coupled wing-canard fighter configurations
Investigations of the low speed longitudinal characteristics of two powered close coupled wing-canard fighter configurations are discussed. Data obtained at angles of attack from -2 deg to 42 deg, Mach numbers from 0.12 to 0.20, nozzle and flap deflections from 0 deg to 40 deg, and thrust coefficients from 0 to 2.0, to represent both high angle of attack subsonic maneuvering characteristics and conventional takeoff and landing characteristics are examined. Data obtained with the nozzles deflected either 60 deg or 90 deg and the flaps deflected 60 deg to represent vertical or short takeoff and landing characteristics are discussed
Low-speed power effects on advanced fighter configurations with two-dimensional deflected thrust
Wind-tunnel studies at the Langley Research Center have shown that significant increases in maximum lift coefficient and stability and decreases in drag due to lift are obtained when two-dimensional vectored thrust is used in conjuction with a close-coupled canard. The configuration tested was somewhat above the theoretical minimum drag due to lift because of the sharp leading edge on the biconvex airfoil used on the wing and canard. An effort to design a new configuration which will approach the minimum drag due to lift while maintaining high-lift configurations was completed. The resulting model will incorporate a realistic planform, airfoil section, and twist for a transonic maneuvering configuration
- …