2,354 research outputs found
Variations of total ozone in the north polar region as seen by TOMS
Data from the TOMS instrument has been used to follow the course of development of the Antarctic ozone springtime minimum since 1979. Addressed is the question of possible north polar region changes which might be deduced from the nine years of TOMS measurements of total ozone. Total ozone is a much more variable quantity in the Northern Hemisphere than in the Southern Hemisphere. This makes the search for trends more difficult and the interpretation of results more uncertain. The 9-yr time series of TOMS data at high latitudes in the Northern Hemisphere is examined. Because the TOMS measurements have drifted by 3 to 4 percent with respect to closely collocated Dobson measurements, it was chosen in this study to adopt the Dobson normalization and adjust the TOMS measurements accordingly. The difference between the last two years (1986 and 1987) of the TOMS record, and the first two years of the record (1979 and 1980) are shown. The difference in percent is given as a function of latitude and time of year. The Antarctic springtime decrease is clearly seen as well as a smaller change which extends to about 50 degrees south latitude at all seasons. Changes in the Northern Hemisphere are less dramatic and are concentrated near the polar night where solar zenith angles are very large. These data are now being examined in more detail and updated results will be presented at the Workshop
Use of a Portable Linear Accelerator to Radiograph a Bridge Drainage Pump
Many freeways in California have storm water pumping plants located near a bridge structure to de-water depressed sections of the freeway. The Ravenswood Slough Pumping Plant is located near the Dumbarton Bridge, which links southern Alameda County on the east to San Mateo County on the west (an 8,600 foot long structure, which carries over 50,000 vehicles daily). This pumping plant is the largest state- maintained pumping facility and drains all storm water into the San Francisco Bay for the City of Menlo Park
Assessment of possible environmental effects of space shuttle operations
The potential of shuttle operations to contribute to atmospheric pollution is investigated. Presented in this interim report are results of the study to date on rocket exhaust inventory, exhaust interactions, dispersion of the ground cloud, detection and measurement of hydrochloric acid and aluminum oxide, environmental effects of hydrochloric acid and aluminum oxide, stratospheric effects of shuttle effluents, and mesospheric and ionospheric effects of orbiter reentry. The results indicate space shuttle operation will not result in adverse environmental effects if appropriate launch constraints are met
The reaction Cl + H2CO yields HCl + HCO: Decreased sensitivity of stratospheric ozone to chlorine perturbations
The absolute rate constant for the reaction Cl + H2CO yields HCl + HCO was determined by the flash-photolysis resonance fluorescence method to be 7.5 plus or minus 0.9 (2 sigma) times 10 to the minus 11th power cu cm/molecule sec at 298 K and to have a negligible temperature dependence. This rate which is more than 2000 times faster than the rate of Cl + CH4 indicates that formaldehyde (H2CO) will compete significantly with methane (CH4) for the conversion of active chlorine in the stratosphere to the inactive reservoir HCl. Chlorine will thus be a less efficient destroyer of stratosphere ozone than previously believed. Ambient stratospheric ozone will depend less on the ambient chlorine amount and the predicted response to chlorine perturbations will be lessened. One-dimensional eddy-diffusion photochemical model calculations indicate a factor of 1.1 less sensitivity to chlorine than recently reported. For a steady-state CFM release at 1975 rates (750,000 tons/year) the eventual ozone depletion is now calculated to be 14%
Impact of space shuttle orbiter reentry on mesospheric NOx.
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/76223/1/AIAA-1973-525-785.pd
Examination of the material removal mechanisms during the lapping process of advanced ceramic rolling elements
Two types of HIPed Si3N4 bearing ball blanks with different surface hardness and fracture toughness were lapped under various loads, speeds, and lubricants using a novel eccentric lapping machine. The lapped surfaces were examined by optical microscope and SEM. The experimental results show that the material removal rate for type I ball blanks were 3-4-fold of type 2 in most cases. Different lapping fluids affected the material removal rate at lower lapping loads, but they had much less influence on the material removal rate at higher lapping loads. The SEM micrographs reveal that the grain pullout prevailed on the lapped surface of type I ball blanks, and the surface of type 2 featured bulk material removal by microcracking. Under extreme high lapping load, surface cracks and damages were found, and SEM with EDX disclosed steel from the lapping plate had transferred to the ceramic ball surface. The preliminary conclusion is that the material removal mechanism during the lapping process of silicon nitride balls using this eccentric lapping machine is mainly mechanical abrasive wear. Lawn and Wilshaw's indentation model on brittle materials is used to explain the difference in material removal rate for the two types of ball blanks
Trends in stratospheric minor constituents
Photochemical models predict that increasing source gas concentrations are also expected to lead to changes in the concentrations of both catalytically active radical species (such as NO2, ClO, and OH) and inactive reservoir species (such as HNO3, HCl, and H2O). For simplicity, we will refer to all these as trace species. Those species that are expected to have increasing concentration levels are investigated. Additionally, the trace species concentration levels are monitored for unexpected changes on the basis of the measure increase in source gases. Carrying out these investigations is difficult due to the limited data base of measurements of stratospheric trace species. In situ measurements are made only infrequently, and there are few satelliteborne measurements, most over a time space insufficient for trend determination. Instead, ground-based measurements of column content must be used for many species, and interpretation is complicated by contributions from the troposphere or mesosphere or both. In this chapter, we examine existing measurements as published or tabulated
Stratospheric General Circulation with Chemistry Model (SGCCM)
In the past two years constituent transport and chemistry experiments have been performed using both simple single constituent models and more complex reservoir species models. Winds for these experiments have been taken from the data assimilation effort, Stratospheric Data Analysis System (STRATAN)
Trends in total column ozone measurements
It is important to ensure the best available data are used in any determination of possible trends in total ozone in order to have the most accurate estimates of any trends and the associated uncertainties. Accordingly, the existing total ozone records were examined in considerable detail. Once the best data set has been produced, the statistical analysis must examine the data for any effects that might indicate changes in the behavior of global total ozone. The changes at any individual measuring station could be local in nature, and herein, particular attention was paid to the seasonal and latitudinal variations of total ozone, because two dimensional photochemical models indicate that any changes in total ozone would be most pronounced at high latitudes during the winter months. The conclusions derived from this detailed examination of available total ozone can be split into two categories, one concerning the quality and the other the statistical analysis of the total ozone record
Potential of Virginia Mallow as an Energy Feedstock
This study aims to compare the potential of Virginia mallow to other high yielding perennial grasses and hardwoods by characterising and comparing fast pyrolysis product yields. Feedstocks selected for this study include miscanthus (Miscanthus x giganteus), Virginia mallow (Sida hermaphrodita), willow short rotation coppice (SRC) (Salix viminalis) and oak (Quercus robur). The experimental work was split into two sections: analytical (Py–GC–MS) and laboratory-scale processing using a 300 g h−1 continuous bubbling fluidised bed reactor. Pyrolysis–gas chromatography–mass spectrometry (Py–GC–MS) has been used to quantify pyrolysis products from these feedstocks by simulating fast pyrolysis heating rates using a CDS 5200 pyrolyser closed coupled to a PerkinElmer Clarus 680 GC–MS. High bio-oil yields were achieved for Virginia mallow, willow SRC and oak (65.36, 62.55 and 66.43 wt% respectively), but miscanthus only produced a yield of 53.46 wt% due to increased feedstock ash content. The water content in the bio-oil is highest from miscanthus (17.64 wt%) and relatively low in the Virginia mallow and hardwoods willow SRC and oak (12.49, 13.88 and 14.53 wt%). Similar high yields of bio-oil and low yields of char and non-condensable gas compared to willow SRC make Virginia mallow an attractive feedstock for fast pyrolysis processing. Graphic Abstract: [Figure not available: see fulltext.]
- …