Calculation of material properties and ray tracing in transformation media

Complex and interesting electromagnetic behavior can be found in spaces with non-flat topology. When considering the properties of an electromagnetic medium under an arbitrary coordinate transformation an alternative interpretation presents itself. The transformed material property tensors may be interpreted as a different set of material properties in a flat, Cartesian space. We describe the calculation of these material properties for coordinate transformations that describe spaces with spherical or cylindrical holes in them. The resulting material properties can then implement invisibility cloaks in flat space. We also describe a method for performing geometric ray tracing in these materials which are both inhomogeneous and anisotropic in their electric permittivity and magnetic permeability

Development of a Flaw Tolerant Enhanced Safe Life Concept for Composite Parts in Turbo-Engines

  &nbsp

Quantum properties of two-dimensional electron gas in the inversion layer of Hg1−xCdxTe bicyrstals

The electronic and magnetotransport properties of conduction electrons in the grain boundary interface of p-type Hg1−xCdxTe bicrystals are investigated. The results clearly demonstrate the existence of a two-dimensional degenerate n-type inversion layer in the vicinity of the grain boundary. Hydrostatic pressure up to 103 MPa is used to characterize the properties of the two-dimensional electron gas in the inversion layer. At atmospheric pressure three series of quantum oscillations are revealled, indicating that tthree electric subbands are occupied. From quantum oscilations of the magnetoresistivity the characteristics parameters of the electric subbands (subband populations nsi, subband energies EF−Ei, effective electron masses m*ci) and their pressure dependences are established. A strong decrease of the carrier concentration in the inversion layer and of the corresponding subband population is observed when pressure is applied A simple theoretical model based on the triangular-well approximation and taking into account the pressure dependence of the energy band structure of Hg1−xCdxTe is use to calculate the energy band diagram of the quantum well and the pressure dependence of the subband parameters

A gradient index metamaterial

Metamaterials--artificially structured materials with tailored electromagnetic response--can be designed to have properties difficult to achieve with existing materials. Here we present a structured metamaterial, based on conducting split ring resonators (SRRs), which has an effective index-of-refraction with a constant spatial gradient. We experimentally confirm the gradient by measuring the deflection of a microwave beam by a planar slab of the composite metamaterial over a broad range of frequencies. The gradient index metamaterial represents an alternative approach to the development of gradient index lenses and similar optics that may be advantageous, especially at higher frequencies. In particular, the gradient index material we propose may be suited for terahertz applications, where the magnetic resonant response of SRRs has recently been demonstrated

LDEF Space Plasma-High Voltage Drainage Experiment post-flight results

The Space Plasma-High Voltage Drainage Experiment (SP-HVDE) was comprised of two identical experimental trays. With one tray located on the leading (ram facing, B10) edge and the other located on the trailing (wake facing, D4) edge of the Long Duration Exposure Facility (LDEF), it was possible to directly compare the effects of ram and wake spacecraft environments on charged dielectric materials. Six arrays of Kapton dielectric samples of 2 mil, 3 mil, and 5 mil thicknesses maintained at +/- 300, +/- 500, and +/- 1000 voltage bias formed the experimental matrix of each tray. In addition, each tray carried two solar cell strings, one biased at +300 volts and the other at -300 volts, to study current leakage from High Voltage Solar Arrays (HVSA). The SP-HVDE provides the first direct, long-term, in-flight measurements of average leakage current through dielectric materials under electric stress. The experiment also yields information on the long term stability of the bulk dielectric properties of such materials. Data and findings of the SP-HVDE are an extension of those from shorter term flight experiments such as the PIX-1 (Plasma Interaction Experiment) and PIX-2 and are therefore valuable in the design and evaluation of long-lived space systems with high voltage systems exposed to the low earth orbital environment. A summary of the SP-HVDE post flight analysis final report delivered to the LDEF Project Office under contract to the National Aeronautics and Space Administration is presented

Ac magnetic susceptibility of a molecular magnet submonolayer directly patterned onto a microSQUID sensor

We report the controlled integration, via Dip Pen Nanolithography, of monolayer dots of ferritin-based CoO nanoparticles (12 Bohr magnetons) into the most sensitive areas of a microSQUID sensor. The nearly optimum flux coupling between these nanomagnets and the microSQUID improves the achievable sensitivity by a factor 100, enabling us to measure the linear susceptibility of the molecular array down to very low temperatures (13 mK). This method opens the possibility of applying ac susceptibility experiments to characterize two-dimensional arrays of single molecule magnets within a wide range of temperatures and frequencies.Comment: 4 pages 3 figure

Experimental Evaluation of Ultrasonic Simulation Techniques in Anisotropic Material

The high performance of the available computer technology provides the possibility to simulate the real life for ultrasonic inspections in terms of primary ultrasonic data like rf-time signals. For isotropic material codes like Generalized Point Source Synthesis (GPSS) or Elastodynamic Finite Integration Technique (EFIT) and the theoretical predictions correlate well with experimental results. Recently, the codes mentioned above have been extended to operate also in anisotropic material. In a first step the codes GPSS and EFIT have been expanded to work in materials of parallel oriented columnar grain structure with transversely isotropic symmetry. In order to verify these codes a set of experiments was carried out on weld metal pads and on welds of defined grain structure. Radiation, propagation, reflexion on boundaries and interaction of the sound field with defects for the modes “through transmission” and “pulse echo” were simulated and compared with the experiment

Transformation Optics for Plasmonics

A new strategy to control the flow of surface plasmon polaritons at metallic surfaces is presented. It is based on the application of the concept of Transformation Optics to devise the optical parameters of the dielectric medium placed on top of the metal surface. We describe the general methodology for the design of Transformation-Optical devices for surface plasmons and analyze, for proof-of-principle purposes, three representative examples with different functionalities: a beam shifter, a cylindrical cloak and a ground-plane cloak.Comment: 15 pages, 3 figure

Some considerations on the transmissivity of thin metal films

Copyright © 2008 Optical Society of America. This paper was published in Optics Express and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: http://www.opticsinfobase.org/oe/abstract.cfm?URI=oe-16-22-17258 . Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law.As interest in plasmonics grows the optical properties of thin metal films becomes increasingly significant. Here we explore the transmissivity of thin metal films at normal incidence, from the ultraviolet to microwaves, and show how, contrary to simplistic treatments, the microwave transmissivity may be much less than the optical transmissivity for films which are well below the skin depth in thickness. This arises because the film is acting as a zero order Fabry-Perot with very high reflectivity at each interface. The skin depth then becomes irrelevant for thin metal films at microwave frequencies. We also note in passing that the expected exponential dependence on thickness at higher thicknesses has an asymptotic limit at zero thickness which may be as high as four times the input intensity