The land–sea coastal border: a quantitative definition by considering the wind and wave conditions in a wave-dominated, micro-tidal environment

A quantitative definition for the land–sea (coastal) transitional area is proposed here for wave-driven areas, based on the variability and isotropy of met-ocean processes. Wind velocity and significant wave height fields are examined for geostatistical anisotropy along four cross-shore transects on the Catalan coast (north-western Mediterranean), illustrating a case of significant changes along the shelf. The variation in the geostatistical anisotropy as a function of distance from the coast and water depth has been analysed through heat maps and scatter plots. The results show how the anisotropy of wind velocity and significant wave height decrease towards the offshore region, suggesting an objective definition for the coastal fringe width. The more viable estimator turns out to be the distance at which the significant wave height anisotropy is equal to the 90th percentile of variance in the anisotropies within a 100&thinsp;km distance from the coast. Such a definition, when applied to the Spanish Mediterranean coast, determines a fringe width of 2–4&thinsp;km. Regarding the probabilistic characterization, the inverse of wind velocity anisotropy can be fitted to a log-normal distribution function, while the significant wave height anisotropy can be fitted to a log-logistic distribution function. The joint probability structure of the two anisotropies can be best described by a Gaussian copula, where the dependence parameter denotes a mild to moderate dependence between both anisotropies, reflecting a certain decoupling between wind velocity and significant wave height near the coast. This wind–wave dependence remains stronger in the central bay-like part of the study area, where the wave field is being more actively generated by the overlaying wind. Such a pattern controls the spatial variation in the coastal fringe width.</p

Metafísica de la debilidad y pedagogía del cuidado en Jean Vanier

En el presente artículo presentamos una investigación que se ha propuesto como objetivo analizar el concepto de debilidad así como el de pedagogía del cuidado en las experiencias y escritos de Jean Vanier. La obra y los proyectos de Vanier son fundamentales en la historia del pensamiento pedagógico europeo. Para ello se ha trabajado desde un enfoque metodológico de corte cualitativo y a través del análisis y la crítica documental. El estudio ha analizado tres grandes categorías que atraviesan el pensamiento y la praxis de Vanier: teorías sobre la debilidad, pedagogías del cuidado y pedagogía espiritual. El análisis se acompaña de una revisión biográfica del autor para poder situar su pensamiento de forma encarnada.In the present article we present a research that has been proposed as an objective to analyze the concept of weakness and the pedagogy of care in the experiences and writings of Jean Vanier. Vanier’s work and projects are fundamental in the history of European pedagogical thinking. To this end, a methodological and qualitative approach has been worked on through analysis and documentary criticism. The study has analyzed three major categories that go through Vanier’s thinking and praxis: Theories about Weakness, Pedagogies of Care and Spiritual Pedagogy. The analysis is accompanied by a biographical review of the author to be able to situate his thought in an embodied way

Measuring Perceived Research Competence of Junior Researchers

Graduates of doctoral (Ph.D.) programs are expected to be competent at designing and conducting research independently. Given the level of research competence needed to successfully conduct research, it is important that assessors of doctoral programs (e.g., faculty and staff) have a reliable and validated tool for measuring and tracking perceived research competence among their students and graduates. A high level of research competence is expected for all Ph.D. graduates worldwide, in addition to in all disciplines/fields. Moreover, graduates of Ph.D. programs may complete their studies in one country but then obtain a research position in another country, emphasizing the need to ensure that all doctoral programs are fostering similar levels of research competence. Thus, the purpose of this study was to gather additional evidence for validity and reliability of the Research Competence (R-Comp) scale. Specifically, we sought to extend the findings of by adapting the scale, translating it to other languages, and applying the tool with a sample of early stage researchers. Our findings provide initial evidence that the adapted PR-Comp is appropriate for use in three languages and across a variety of disciplines/programs of study

Modelling barrier beaches under storms with XBEACH: The case of the Trabucador bar

Postprint (updated version

Structural tuning of photoluminescence in nanoporous anodic alumina by hard anodization in oxalic and malonic acids

We report on an exhaustive and systematic study about the photoluminescent properties of nanoporous anodic alumina membranes fabricated by the one-step anodization process under hard conditions in oxalic and malonic acids. This optical property is analysed as a function of several parameters (i.e. hard anodization voltage, pore diameter, membrane thickness, annealing temperature and acid electrolyte). This analysis makes it possible to tune the photoluminescent behaviour at will simply by modifying the structural characteristics of these membranes. This structural tuning ability is of special interest in such fields as optoelectronics, in which an accurate design of the basic nanostructures (e.g. microcavities, resonators, filters, supports, etc.) yields the control over their optical properties and, thus, upon the performance of the nanodevices derived from them (biosensors, interferometers, selective filters, etc.).Abel Santos, Maria Alba, Mahbubur M Rahman, Pilar Formentín, Josep Ferré-Borrull, Josep Pallarès, Lluis F Marsa

Tunable Fabry-Perot interferometer based on nanoporous anodic alumina for optical biosensing purposes

Here, we present a systematic study about the effect of the pore length and its diameter on the specular reflection in nanoporous anodic alumina. As we demonstrate, the specular reflection can be controlled at will by structural tuning (i.e., by designing the pore geometry). This makes it possible to produce a wide range of Fabry-Pérot interferometers based on nanoporous anodic alumina, which are envisaged for developing smart and accurate optical sensors in such research fields as biotechnology and medicine. Additionally, to systematize the responsiveness to external changes in optical sensors based on nanoporous anodic alumina, we put forward a barcode system based on the oscillations in the specular reflection.Abel Santos, Victor S Balderrama, María Alba, Pilar Formentín, Josep Ferré-Borrull, Josep Pallarès, Lluís F Marsa

Surface ablation of RbTiOPO4 by femtosecond laser

We report here the results obtained in surface ablation of RbTiOPO4 single crystals by femtosecond laser. We fabricated and characterized one-dimensional (1D) diffraction gratings with different lattice spacings of 15 and 20 μm, and with a sub-modulation of the period introduced in the later. The optical and electronic microscopy characterization and filling factor analysis of these diffraction gratings are reported. We also show that the roughness generated on the grooves by the ablation process can be improved by chemical etching.This work was partially funded by the European Commission under the Seventh Framework Program under Project Cleanspace FP7-SPACE-2010-1-GA-263044, supported by the Spanish Government under Projects PI09/90527, TEC2009-09551, AECID A/024560/09, FIS2009-09522, HOPE CSD2007-00007 and SAUUL CSD2007-00013 (Consolider-Ingenio 2010), by Catalan Government under Projects 2009SGR235 and 2009SGR549, by Junta de Castilla y León under Project GR27, and by the Research Center on Engineering of Materials and Systems (EMaS) of the URV. J.J.C. is supported by the Education and Science Ministry of Spain and European Social Fund under the Ramón y Cajal program, RYC2006-858. We also acknowledge support from the Centro de Laseres Pulsados, CLPU, Salamanca, Spain

Session 2 - Establishment of a VET system with focus on Further Education: presentation of ideas on the motivation and establishment of a Further Education system (FES), especially in universities in Sub-Sahara Africa

Session 2 Establishment of a VET system with focus on Further Education: presentation of ideas on the motivation and establishment of an education system, particularly a Further Education system, especially in universities in Sub-Sahara Africa. While session 1 discusses the basics of VET and Further Education, session 2 deals with how to establish Further Education structures by presenting visions and ideas on their implementation and formation. Different approaches are analysed from a VET perspective to develop them for practical purposes. The focus is specifically on efforts from Sub-Saharan countries

Photoluminescence and cathodoluminescence of Eu:La2O3 nanoparticles synthesized by several methods

Abstract : Europium-doped La2O3 nanocrystalline powders with sizes ranging from 4 nm to 300 nm have been obtained by the modified Pechini, hydrothermal with conventional furnace, hydrothermal with microwave furnace, and precipitation with ultrasonic bath methods. X-ray diffraction techniques were used to study the evolution of the prepared gels towards the desired crystalline phase. We determined the size and the morphology of the nanoparticles by electronic microscopy. Finally, we studied and analyzed the luminescence properties of the trivalent europium in the hexagonal La2O3 nanocrystals by photoluminescence and cathodoluminescence