790 research outputs found
Negotiating The Italian Self: Catholicism And The Demise Of Fascism, Racism And Colonialism
Questo contributo analizza la rivista italiana La Civiltà Cattolica, una pubblicazione religiosa molto influente. Si interessa al modo in cui durante il periodo 1935-1949 questioni di colonialismo, razzismo e antisemitismo vennero inserite nel discorso tradizionalmente nazionalista e religioso della rivista. In questo modo, il presente studio illustra come sotto il fascismo nozioni di identità vennero trattate in un contesto religioso, e come dopo la caduta del fascismo venne promosso un messaggio di italianità cattolica,
tramite una parziale riscrittura del passato
Smartphone-based optical assays in the food safety field.
Smartphone based devices (SBDs) have the potential to revolutionize food safety control by empowering citizens to perform screening tests. To achieve this, it is of paramount importance to understand current research efforts and identify key technology gaps. Therefore, a systematic review of optical SBDs in the food safety sector was performed. An overview of reviewed SBDs is given focusing on performance characteristics as well as image analysis procedures. The state-of-the-art on commercially available SBDs is also provided. This analysis revealed several important technology gaps, the most prominent of which are: (i) the need to reach a consensus regarding optimal image analysis, (ii) the need to assess the effect of measurement variation caused by using different smartphones and (iii) the need to standardize validation procedures to obtain robust data. Addressing these issues will drive the development of SBDs and potentially unlock their massive potential for citizen-based food control
Development and evaluation of different normalization strategies for gene expression studies in Candida albicans biofilms by real-time PCR
BACKGROUND: Candida albicans biofilms are commonly found on indwelling medical devices. However, the molecular basis of biofilm formation and development is not completely understood. Expression analysis of genes potentially involved in these processes, such as the ALS (Agglutinine Like Sequence) gene family can be performed using quantitative PCR (qPCR). In the present study, we investigated the expression stability of eight housekeeping genes potentially useful as reference genes to study gene expression in Candida albicans (C. albicans) biofilms, using the geNorm Visual Basic Application (VBA) for Microsoft Excel. To validate our normalization strategies we determined differences in ALS1 and ALS3 expression levels between C. albicans biofilm cells and their planktonic counterparts. RESULTS: The eight genes tested in this study are ranked according to their expression stability (from most stable to least stable) as follows: ACT1 (β-actin)/PMA1 (adenosine triphosphatase), RIP (ubiquinol cytochrome-c reductase complex component), RPP2B (cytosolic ribosomal acidic protein P2B), LSC2 (succinyl-CoA synthetase β-subunit fragment), IMH3 (inosine-5'-monophosphate dehydrogenase fragment), CPA1 (carbamoyl-phosphate synthethase small subunit) and GAPDH (glyceraldehyde-3-phosphate dehydrogenase). Our data indicate that five genes are necessary for accurate and reliable normalization of gene expression data in C. albicans biofilms. Using different normalization strategies, we found a significant upregulation of the ALS1 gene and downregulation of the ALS3 gene in C. albicans biofilms grown on silicone disks in a continous flow system, the CDC reactor (Centre for Disease Control), for 24 hours. CONCLUSION: In conclusion, we recommend the use of the geometric mean of the relative expression values from the five housekeeping genes (ACT1, PMA1, RIP, RPP2B and LSC2) for normalization, when analysing differences in gene expression levels between C. albicans biofilm cells and planktonic cells. Validation of the normalization strategies described above showed that the ALS1 gene is overexpressed and the ALS3 gene is underexpressed in C. albicans biofilms grown on silicone in the CDC reactor for 24 hours
Influence of HiPIMS pulse widths on the deposition behaviour and properties of CuAgZr compositionally graded films
In this work, the influence of different pulse widths (25, 50 and 100 μs) during high power impulse magnetron sputtering (HiPIMS) of copper, silver and zirconium was investigated in terms of plasma properties and properties of combinatorial composition gradient CuAgZr film libraries. In situ plasma diagnostics via optical emission spectroscopy (OES), time-of-flight mass spectrometry (TOFMS), and modified quartz crystal microbalance (m-QCM), followed by film ex situ X-ray diffraction (XRD) and scanning electron microscopy (SEM) investigations allowed to determine the effect of deposition parameters on the thin films' microstructural changes. Changing the pulse width, while keeping the duty cycle constant, modified the discharge composition in the target region and the ionised fraction of the sputtered species in the substrate region. The maximum Cu ionised fraction (19 %) was found for 50 μs, resulting in compact and smooth morphology for Cu-rich films, whereas short 25 μs pulses provided porous columnar films with rough surfaces, as the result from Ar+ bombardment. For Ag-rich films, Ag segregation allowed the deposition of dense layers, regardless of the used pulse width.
Furthermore, low Ag (<10 at.%) CuAgZr films produced via HiPIMS and direct-current magnetron sputtering (DCMS) were compared in terms of structural and mechanical property changes as a function of Zr contents. For the studied chemical composition range, a linear relationship between Zr content, XRD phase shift and mechanical properties was observed for HiPIMS films, in contrast to DCMS's more abrupt transitions. An increase in hardness and elastic modulus (up to 44 % and 22 %, respectively) was found for the HiPIMS films compared to DCMS ones. The obtained results highlight HiPIMS's flexibility in providing a wide range of tailoring possibilities to meet specific application requirements, such as crystalline microstructure, density and associated mechanical properties
A simple method for measuring plasma power in rf-GDOES instruments
A method for determining plasma power in rf-GDOES is presented. It is based on an effective resistance located in the inductive coil of the impedance matching. The amount of electrical power consumed in the matching system depends on the capacitive current flowing through the matching system, which depends on the applied voltage, the stray capacity, and the frequency. This correction method is experimentally evaluated and compared with the integral plasma power calculatio
Introduction
This chapter provides an overview of the book theme, motivating the need for high-performance and time-predictable embedded computing. It describes the challenges introduced by the need for time-predictability on the one hand, and high-performance on the other, discussing on a high level how these contradictory requirements can be simultaneously supported
Recommended from our members
Future outlook of people living alone with early-stage dementia and their non-resident relatives and friends who support them
Little is known about the experiences of people living alone with dementia in the community and their non-resident relatives and friends who support them. In this paper, we explore their respective attitudes and approaches to the future, particularly regarding the future care and living arrangements of those living with dementia. The study is based on a qualitative secondary analysis of interviews with 24 people living alone with early-stage dementia in North Wales, United Kingdom, and one of their relatives or friends who supported them. All but four of the dyads were interviewed twice over 12 months (a total of 88 interviews). In the analysis, it was observed that several people with dementia expressed the desire to continue living at home for ‘as long as possible’. A framework approach was used to investigate this theme in more depth, drawing on concepts from the existing studies of people living with dementia and across disciplines. Similarities and differences in the future outlook and temporal orientation of the participants were identified. The results support previousresearchsuggestingthat the future outlookofpeoplelivingwithearly-stagedementia can be interpreted in part as a response to their situation and a way of coping with the threats that it is perceived to present, and not just an impaired view of time. Priorities for future research are highlighted in the discussion
Cost-Effectiveness Findings from the Agewell Pilot Study of Behaviour Change to Promote Health and Wellbeing in Later Life.
Background: Participation in cognitive and physical activities may help to maintain health and wellbeing in older people. The Agewell study explored the feasibility of increasing cognitive and physical activity in older people through a goal-setting approach. This paper describes the findings of the cost-effectiveness analysis. Method: Individuals over the age of 50 and attending an Agewell centre in North Wales were randomised to one of three conditions: control (IC), goal-setting (GS), or goal-setting with mentoring (GM). We undertook a cost-effectiveness analysis comparing GS vs. IC, GM vs. IC and GM vs. GS. The primary outcome measure for this analysis was the QALY, calculated using the EQ-5D. Participants’ health and social care contacts were recorded and costed using national unit costs. Results: Seventy participants were followed-up at 12 months. Intervention set up and delivery costs were £252 per participant in the GS arm and £269 per participant in the GM arm. Mean health and social care costs over 12 months were £1,240 (s.d. £3,496) per participant in the IC arm, £1,259 (s.d. £3,826) per participant in the GS arm and £1,164 (s.d. £2,312) per participant in the GM arm. At a willingness to pay threshold of £20,000 per QALY there was a 65% probability that GS was cost-effective compared to IC (ICER of £1,070). However, there was only a 41% probability that GM was cost-effective compared to IC (ICER of £2,830) at a threshold of £20,000 per QALY. Conclusion: Setting up and running the community based intervention was feasible. Due to the small sample size it is not possible to draw a firm conclusion about cost-effectiveness; however, our preliminary results suggest that goal- setting is likely to be cost-effective compared to the control condition of no goal-setting, the addition of mentoring was effective but not cost-effective.Lifelong Health and Well-being Programme through the Medical Research Counci
- …