547 research outputs found
Generalized analysis of quasi-steady-state and transient decay open circuit voltage measurements
The current–voltage characteristics of solar cells and photodiodes can be determined by measuring the open-circuit voltage as a function of a slowly varying light intensity. This article presents a detailed theoretical analysis and interpretation of such quasi-steady-state Vocmeasurements(QssVoc). The ability of this analysis to accurately obtain the true steady-state device characteristics even in the case of high lifetime, high resistivitysilicon devices is demonstrated experimentally. The QssVoc technique can be used to determine the minority carrier lifetime, and the new generalized analysis is required to do this accurately. An important outcome is that solar cell and diode device characteristics can be obtained from measurements of either the photoconductance or the open-circuit voltage, even using transient techniques.This work has been funded by the Australian Research
Council. The authors also thank S. Glunz and S. Rein from
the Fraunhofer Institute of Solar Energy Systems, for the use
of the solar cell used in Fig. 5
Voltage gated inter-cation selective ion channels from graphene nanopores
With the ability to selectively control ionic flux, biological protein ion
channels perform a fundamental role in many physiological processes. For
practical applications that require the functionality of a biological ion
channel, graphene provides a promising solid-state alternative, due to its
atomic thinness and mechanical strength. Here, we demonstrate that nanopores
introduced into graphene membranes, as large as 50 nm in diameter, exhibit
inter-cation selectivity with a ~20x preference for K+ over divalent cations
and can be modulated by an applied gate voltage. Liquid atomic force microscopy
of the graphene devices reveals surface nanobubbles near the pore to be
responsible for the observed selective behavior. Molecular dynamics simulations
indicate that translocation of ions across the pore likely occurs via a thin
water layer at the edge of the pore and the nanobubble. Our results demonstrate
a significant improvement in the inter-cation selectivity displayed by a
solid-state nanopore device and by utilizing the pores in a de-wetted state,
offers an approach to fabricating selective graphene membranes that does not
rely on the fabrication of sub-nm pores
Recovering the state sequence of hidden Markov models using mean-field approximations
Inferring the sequence of states from observations is one of the most
fundamental problems in Hidden Markov Models. In statistical physics language,
this problem is equivalent to computing the marginals of a one-dimensional
model with a random external field. While this task can be accomplished through
transfer matrix methods, it becomes quickly intractable when the underlying
state space is large.
This paper develops several low-complexity approximate algorithms to address
this inference problem when the state space becomes large. The new algorithms
are based on various mean-field approximations of the transfer matrix. Their
performances are studied in detail on a simple realistic model for DNA
pyrosequencing.Comment: 43 pages, 41 figure
Determination of charge-carrier mobility in disordered thin-film solar cells as a function of current density
Charge-carrier mobility is a fundamental material parameter, which plays an important role in determining solar-cell efficiency. The higher the mobility, the less time a charge carrier will spend in a device and the less likely it is that it will be lost to recombination. Despite the importance of this physical property, it is notoriously difficult to measure accurately in disordered thin-film solar cells under operating conditions. We, therefore, investigate a method previously proposed in the literature for the determination of mobility as a function of current density. The method is based on a simple analytical model that relates the mobility to carrier density and transport resistance. By revising the theoretical background of the method, we clearly demonstrate what type of mobility can be extracted (constant mobility or effective mobility of electrons and holes). We generalize the method to any combination of measurements that is able to determine the mean electron and hole carrier density, and the transport resistance at a given current density. We explore the robustness of the method by simulating typical organic solar-cell structures with a variety of physical properties, including unbalanced mobilities, unbalanced carrier densities, and for high or low carrier trapping rates. The simulations reveal that near VOC and JSC, the method fails due to the limitation of determining the transport resistance. However, away from these regions (and, importantly, around the maximum power point), the method can accurately determine charge-carrier mobility. In the presence of strong carrier trapping, the method overestimates the effective mobility due to an underestimation of the carrier density
Recommended from our members
Spatial and temporal distribution of a C-like asthenoshpheric component in the Rano Rahi Seamount Field, East Pacific Rise, 15°-19°S
Lavas of the Rano Rahi seamount field define a Nd-Pb-Sr isotopic array that connects, and substantially
overlaps, the arrays of the nearby East Pacific Rise axis and 5.6–28 Ma lavas of the Pukapuka ridge
system, situated between the seamount field and French Polynesia. Dating of Rano Rahi samples by
⁴⁰Ar-³⁹Ar incremental heating methods yields ages between 0.23 and 4.67 Ma. Most of the dated lavas were erupted within 60 km of the axis, and no systematic isotopic variation with age is observed. The
isotopic and incompatible element data indicate a persistent two-component mantle source comprising variable proportions of normal Pacific ocean-ridge-type mantle and a ‘‘C’’-like Pukapuka end-member with lower εnd, higher ⁸⁷Sr/⁸⁶Sr and ²⁰⁶Pb/²⁰⁴Pb, and relative enrichment in the highly incompatible
elements. The Rano Rahi data reveal peaks of low εnd, high ⁸⁷Sr/⁸⁶Sr, and high ²⁰⁶Pb/²⁰⁴Pb at about 16°– 17°S and 18.5°–19°S that appear to correspond to two concentrations of C-rich mantle, probably
streaming eastward from French Polynesia. The northern stream may have reached the axis more recently and/or be less continuous than the southern stream.Keywords: Rano Rahi seamounts, Mid-ocean ridge geochemistry, Mantle heterogeneity, Geochronology, East Pacific ris
Surface passivation of crystalline silicon by Cat-CVD amorphous and nanocrystalline thin silicon films
In this work, we study the electronic surface passivation of crystalline silicon with intrinsic thin silicon films deposited by Catalytic CVD. The contactless method used to determine the effective surface recombination velocity was the quasi-steady-state photoconductance technique. Hydrogenated amorphous and nanocrystalline silicon films were evaluated as passivating layers on n- and p-type float zone silicon wafers. The best results were obtained with amorphous silicon films, which allowed effective surface recombination velocities as low as 60 and 130 cms -1 on p- and n-type silicon, respectively. To our knowledge, these are the best results ever reported with intrinsic amorphous silicon films deposited by Catalytic CVD. The passivating properties of nanocrystalline silicon films strongly depended on the deposition conditions, especially on the filament temperature. Samples grown at lower filament temperatures (1600 °C) allowed effective surface recombination velocities of 450 and 600 cms -1 on n- and p-type silicon
Microfluidic systems for the analysis of the viscoelastic fluid flow phenomena in porous media
In this study, two microfluidic devices are proposed as simplified 1-D microfluidic analogues of a porous medium. The objectives are twofold: firstly to assess the usefulness of the microchannels to mimic the porous medium in a controlled and simplified manner, and secondly to obtain a better insight about the flow characteristics of viscoelastic fluids flowing through a packed bed. For these purposes, flow visualizations and pressure drop measurements are conducted with Newtonian and viscoelastic fluids. The 1-D microfluidic analogues of porous medium consisted of microchannels with a sequence of contractions/ expansions disposed in symmetric and asymmetric arrangements. The real porous medium is in reality, a complex combination of the two arrangements of particles simulated with the microchannels, which can be considered as limiting ideal configurations. The results show that both configurations are able to mimic well the pressure drop variation with flow rate for Newtonian fluids. However, due to the intrinsic differences in the deformation rate profiles associated with each microgeometry, the symmetric configuration is more suitable for studying the flow of viscoelastic fluids at low De values, while the asymmetric configuration provides better results at high De values. In this way, both microgeometries seem to be complementary and could be interesting tools to obtain a better insight about the flow of viscoelastic fluids through a porous medium. Such model systems could be very interesting to use in polymer-flood processes for enhanced oil recovery, for instance, as a tool for selecting the most suitable viscoelastic fluid to be used in a specific formation. The selection of the fluid properties of a detergent for cleaning oil contaminated soil, sand, and in general, any porous material, is another possible application
Effects of variable magma supply on mid-ocean ridge eruptions : constraints from mapped lava flow fields along the Galápagos Spreading Center
Author Posting. © American Geophysical Union, 2012. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geochemistry Geophysics Geosystems 13 (2012): Q08014, doi:10.1029/2012GC004163.Mapping and sampling of 18 eruptive units in two study areas along the Galápagos Spreading Center (GSC) provide insight into how magma supply affects mid-ocean ridge (MOR) volcanic eruptions. The two study areas have similar spreading rates (53 versus 55 mm/yr), but differ by 30% in the time-averaged rate of magma supply (0.3 × 106 versus 0.4 × 106 m3/yr/km). Detailed geologic maps of each study area incorporate observations of flow contacts and sediment thickness, in addition to sample petrology, geomagnetic paleointensity, and inferences from high-resolution bathymetry data. At the lower-magma-supply study area, eruptions typically produce irregularly shaped clusters of pillow mounds with total eruptive volumes ranging from 0.09 to 1.3 km3. At the higher-magma-supply study area, lava morphologies characteristic of higher effusion rates are more common, eruptions typically occur along elongated fissures, and eruptive volumes are an order of magnitude smaller (0.002–0.13 km3). At this site, glass MgO contents (2.7–8.4 wt. %) and corresponding liquidus temperatures are lower on average, and more variable, than those at the lower-magma-supply study area (6.2–9.1 wt. % MgO). The differences in eruptive volume, lava temperature, morphology, and inferred eruption rates observed between the two areas along the GSC are similar to those that have previously been related to variable spreading rates on the global MOR system. Importantly, the documentation of multiple sequences of eruptions at each study area, representing hundreds to thousands of years, provides constraints on the variability in eruptive style at a given magma supply and spreading rate.This work was supported by the National Science Foundation grants OCE08–49813, OCE08–50052, and OCE08–
49711.2013-02-2
Lower crustal crystallization and melt evolution at mid-ocean ridges
Author Posting. © The Author(s), 2012. This is the author's version of the work. It is posted here by permission of Nature Publishing Group for personal use, not for redistribution. The definitive version was published in Nature Geoscience 5 (2012): 651–655, doi:10.1038/ngeo1552.Mid-ocean ridge magma is produced when Earth’s mantle rises beneath the ridge axis and melts as a result of the decrease in pressure. This magma subsequently undergoes cooling and crystallization to form the oceanic crust. However, there is no consensus on where within the crust or upper mantle crystallization occurs1-5. Here we provide direct geochemical evidence for the depths of crystallization beneath ridge axes of two spreading centres located in the Pacific Ocean: the fast-spreading-rate East Pacific Rise and intermediate-spreading-rate Juan de Fuca Ridge. Specifically, we measure volatile concentrations in olivine-hosted melt inclusions to derive vapour-saturation pressures and to calculate crystallisation depth. We also analyse the melt inclusions for major and trace element concentrations, allowing us to compare the distributions of crystallisation and to track the evolution of the melt during ascent through the oceanic crust. We find that most crystallisation occurs within a seismically-imaged melt lens located in the shallow crust at both ridges, but over 25% of the melt inclusions have crystallisation pressures consistent with formation in the lower oceanic crust. Furthermore, our results suggest that melts formed beneath the ridge axis can be efficiently mixed and undergo olivine crystallisation in the mantle, prior to ascent into the ocean crust.This research was supported by the National Science
Foundation (EAR-0646694) and the WHOI Deep Ocean Exploration Institute/Ocean
Ridge Initiative.2013-02-1
- …