Carbon Segregation in CoCrFeMnNi High‐Entropy Alloy Driven by High‐Pressure Torsion at Room and Cryogenic Temperatures

Herein, a CoCrFeMnNi high-entropy alloy with reduced Cr content and with the addition of 2 at% C interstitial is processed via high-pressure torsion (HPT) under 6.5 GPa by three turns at room and cryogenic temperatures. The microstructure is investigated by transmission electron microscopy (TEM) and atom probe tomography (APT). The results indicate that C atoms segregate at the boundaries of the nanograins in the sample processed at room temperature, while the sample processed at cryogenic temperature does not show any notable segregations of carbon

Grain boundary segregation in UFG alloys processed by severe plastic deformation

Grain boundary segregations were investigated by Atom Probe Tomography in an Al-Mg alloy, a carbon steel and Armco\trademark Fe processed by severe plastic deformation (SPD). In the non-deformed state, the GBs of the aluminium alloy are Mg depleted, but after SPD some local enrichment up to 20 at.% was detected. In the Fe-based alloys, large carbon concentrations were also exhibited along GBs after SPD. These experimental observations are attributed to the specific structure of GBs often described as "non-equilibrum" in ultra fine grained materials processed by SPD. The grain boundary segregation mechanisms are discussed and compared in the case of substitutional (Mg in fcc Al) and interstitial (C in bcc Fe) solute atoms

Effect of high-pressure torsion on structure and microhardness of ti/tib metal–matrix composite

Effect of high-pressure torsion (HPT) at 400 °C on microstructure and microhardness of a Ti/TiB metal–matrix composite was studied. The starting material was produced by spark plasma sintering of a mixture of a pure Ti and TiB2 (10 wt %) powders at 1000 °C. The microstructure evolution during HPT was associated with an increase in dislocation density and substructure development that resulted in a gradual microstructure refinement of the Ti matrix and shortening/redistribution of TiB whiskers. After five revolutions, a nanostructure with (sub) grain size of ~30 nm was produced in Ti matrix. The microhardness increased with strain attaining the value ~520 HV after five revolutions. The contribution of different hardening mechanisms into the hardness of the Ti/TiB metal–matrix composite was quantitatively analyzed

Modelling of High Pressure Torsion using FEM

High Pressure Torsion (HPT) is historically the first and is currently most common process of the severe plastic deformation (SPD). HPT is used for producing nanocrystalline structures in metals and alloys, as well as for cold welding of powders. The result of the HPT treatment is determined by the flow kinematics and the stress state of a material under deformation. P. Bridgman proposed a simple model for the initial assessment of shear strain in the sample during HPT. A number of recent investigations show that the true plastic flow during HPT can differ significantly from the simple model. We present in our report results of the FEM investigation of different types of flow during HPT. We propose a hypothesis that the vortex formation during the SPD process is caused by the local blocking of simple shear in a material under deformation

Machine Learning Approach to Community Detection in a High-Entropy Alloy Interaction Network

There is a growing trend toward the use of interaction network methods and algorithms, including community-based detection methods, in various fields of science. The approach is already used in many applications, for example, in social sciences and health informatics to analyze behavioral patterns during the COVID-19 pandemic, protein–protein networks in biological sciences, agricultural science, economy, and so forth. This paper attempts to build interaction networks based on high-entropy alloy (HEA) descriptors in order to discover HEA communities with similar functionality. In addition, these communities could be leveraged to discover new alloys not yet included in the data set without any experimental laboratory effort. This research has been carried out using two community detection algorithms, the Louvain algorithm and the enhanced particle swarm optimization (PSO) algorithm. The data set, which is used in this paper, includes 90 HEAs and 6 descriptors. The results reveal 13 alloy communities, and the accuracy of the results is validated by the modularity. The experimental results show that the method with the PSO-based community detection algorithm can achieve alloy communities with an average accuracy improvement of 0.26 compared to the Louvain algorithm. Furthermore, some characteristics of HEAs, for example, their phase composition, could be predicted by the extracted communities. Also, the HEA phase composition has been predicted by the proposed method and achieved about 93% precision

Controlling shear band instability by nanoscale heterogeneities in metallic nanoglasses

Strain localization during plastic deformation drastically reduces the shear band stability in metallic glasses, ultimately leading to catastrophic failure. Therefore, improving the plasticity of metallic glasses has been a long-standing goal for several decades. In this regard, nanoglass, a novel type of metallic glass, has been proposed to exhibit differences in short and medium range order at the interfacial regions, which could promote the formation of shear transformation zones. In the present work, by introducing heterogeneities at the nanoscale, both crystalline and amorphous, significant improvements in plasticity are realized in micro-compression tests. Both amorphous and crystalline dispersions resulted in smaller strain bursts during plastic deformation. The yield strength is found to increase significantly in Cu–Zr nanoglasses compared to the corresponding conventional metallic glasses. The reasons for the mechanical behavior and the importance of nanoscale dispersions to tailor the properties is discussed in detail

A Mathematical Model of Deformation under High Pressure Torsion Extrusion

High pressure torsion extrusion (HPTE) is a promising new mechanism for severe plastic deformation of metals and alloys. It enables the manufacture of long products with a radial gradient ultrafine-grained structure and of composite materials with a helical inner architecture at the meso and the macro scale. HPTE is very promising as a technique enabling light weighting, especially with magnesium, aluminium and titanium alloys. For the first time, this article presents an analytical model of the HPTE process that makes it possible to investigate the role of the various process parameters and calculate the distribution of the equivalent strain over the entire sample length. To verify the model, its predictions were compared with the numerical simulations by employing the finite element software QForm. It was shown that potential negative effects associated with the slippage of a sample relative to the container walls can be suppressed through appropriate die design and an efficient use of the friction forces

Unveiling the Local Atomic Arrangements in the Shear Band Regions of Metallic Glass

The prospective applications of metallic glasses are limited by their lack of ductility, attributed to shear banding inducing catastrophic failure. A concise depiction of the local atomic arrangement (local atomic packing and chemical short‐range order), induced by shear banding, is quintessential to understand the deformation mechanism, however still not clear. An explicit view of the complex interplay of local atomic structure and chemical environment is presented by mapping the atomic arrangements in shear bands (SBs) and in their vicinity in a deformed Vitreloy 105 metallic glass, using the scanning electron diffraction pair distribution function and atom probe tomography. The results experimentally prove that plastic deformation causes a reduction of geometrically favored polyhedral motifs. Localized motifs variations and antisymmetric (bond and chemical) segregation extend for several hundred nanometers from the SB, forming the shear band affected zones. Moreover, the variations within the SB are found both perpendicular and parallel to the SB plane, also observable in the oxidation activity. The knowledge of the structural–chemical changes provides a deeper understanding of the plastic deformation of metallic glasses especially for their functional applications and future improvements