To assess placental volume in first and second trimester of pregnancy in UKM Medical Centre.

This was a prospective cohort study. From May 2011 to June 2012, pregnant women were recruited via the obstetric clinic, patient admission centre and wards in UKM Medical Centre (UKMMC). An ultrasound scan was performed at 11-16 weeks and again at 18-26 weeks of gestation to check for placental volume and Uterine Artery Resistance Index (UARI) and Pulsatility Index (UAPI). The placental volume was measured by three-dimensional ultrasound using the Virtual Organ Computer-Aided Analysis (VOCAL) technique

Polyetherimide hollow fiber membranes for CO2 absorption and stripping in membrane contactor application

Porous asymmetric polyetherimide (PEI) hollow fiber membranes with various non-solvent additives, e.g. lithium chloride, methanol and phosphoric acid (PA) were prepared for CO2 absorption and stripping process in a membrane contractor. The PEI membranes were characterized via gas permeation, liquid entry pressure of water (LEPw), contact angle and field emission scanning electronic microscopy analysis. The CO2 absorption and stripping performance was evaluated via the membrane contactor system. Addition of non-solvent additives increased the LEPw and membrane porosity of the PEI membrane with the formation of various membrane microstructures and contact angles. Absorption test was performed at 40 °C showed that the PEI-PA membrane produced the highest absorption flux of 2.7 × 10-2 mol m-2 s-1 at 0.85 m s-1 of liquid velocity. Further testing on PEI-PA membrane was conducted on CO2 stripping at 60 °C, 70 °C to 80 °C and the results indicated that the stripping flux was lower compared to the absorption flux. Stripping tests at 80 °C produced the highest stripping flux which might due to the increase in equilibrium partial pressure of CO2 in the liquid absorbent. Modification of PEI membrane via incorporation of additive can enhanced the performance of a membrane contactor via increasing the absorption and stripping flux

UHF RFID split-ring resonator tag antenna inductively coupled feed for metallic object

In this paper, a split-ring resonator and an inductively coupled feed technique are designed to improve the RFID tag antennas performance. The presented tag antenna consists of two symmetrical C-shaped resonators with strip line in order to feed the radiating split-ring resonator structures by implementing an inductively coupled feed approach placed on the upper surface of Polytetrafluoroethylene substrate. By selecting a proper length and width of spilt-ring resonator structures, along with desirable coupling distance between two symmetrical C-shaped resonators and spilt-ring resonator structures, the input impedance of tag antenna can be obtained, which leads to attain an excellent conjugate match between antenna and IC chip. The proposed feeding technique and spilt-ring resonator structures offer a better performance of RFID tag among antenna size, reflection coefficient, and gain. The gain of the designed tag antenna is -2.272 dB at its operating frequency (916 MHz), the tag antenna is mounted on a square perfect electrical conductor of 200 mm side length, while the thickness of PEC is 1 mm. The simulation results were verified by the presented method via enhancing the performance of tag antennas for metallic object

Ar-Rahnu: A Review of Literature and Future Research

Academicians, practitioners, and other faith-based stakeholders have recognised Ar-Rahnu or Islamic pawn broking as one of micro financing tool to the Muslims. The increasing need for Ar-Rahnu services is influenced by the awareness of the Muslims on the availability of such service and the benefit of using it. In line with this development is academician is growing interest in Ar-Rahnu research, thus create opportunities for interested scholars to assess the development of research in this discipline. This paper purported to review published studies in this discipline since the inception of Ar-Rahnu concept to the current year to identify key trends or issues in Ar-Rahnu research and propose future research agenda. This review, which is the first of its kind, is hoped to be valuable to the present and future Ar-Rahnu scholars interested in the evolution of literature and identifying opportunities for future research

An extended Interval Type-2 Fuzzy VIKOR technique with equitable linguistic scales and Z-Numbers for solving water security problems in Malaysia

Interval Type-2 Fuzzy VIseKriterijumska Optimizacija I Kompromisno Resenje (IT2FVIKOR) technique is one of the techniques of Interval Type-2 Fuzzy Multi-Criteria Decision Making (IT2FMCDM), which was developed to solve problems involving conflicting and multiple objectives. Most of the IT2FVIKOR methods are created from linguistic variables based on Interval Type-2 Fuzzy Set (IT2FS) and its generalization, such as Interval Type-2 Fuzzy Numbers (IT2FNs). Recent literature suggests that equitable linguistic scales can offer a better alternative, particularly when IT2FSs have some limitations in handling uncertainty and imbalance. This paper proposes the extended IT2FVIKOR with an equitable linguistic scale and Z-Numbers, where its linguistic scale introduces an equitable balance of positive and negative scales added to the restriction and reliability approach. Different from the typical IT2FVIKOR, which directly utilizes IT2FNs with a positive membership, the proposed method introduces positive and negative membership where each side considers a restriction and reliability approach. Besides, this paper also offers objective weights using fuzzy entropy-based IT2FS to calculate the weights of the extended IT2FVIKOR. The obtained solutions would help decision makers (DMs) identify the best solution to enhance water security projects in terms of finding the best strategies for water supply security in Malaysia

Unveiling the Power of Tiktok: Exploring Consumer Purchase Intentions in the Post Covid-19 Pandemic in Malaysia

Despite the growing significance of Tik-Tok as a platform for advertising and entertainment, there is a lack of comprehensive research on how Tik Tok advertising content, particularly considering influencer credibility and sales promotion, influences consumers' purchase intentions in Malaysia after the Covid-19 pandemic. The existing studies focus on specific aspects, such as social media entertainment and Tik-Tok's response to the pandemic, but fail to provide a holistic understanding of the multifaceted factors influencing consumer behavior in the context of Tik-Tok advertising content. The objective of this study is to examine the relationship between Tik-Tok advertising content and the purchase intentions of consumers following the Covid-19 pandemic. This study employs non-probability convenience sampling to gather data from 375 randomly selected respondents. The research employed a quantitative approach with a cross-sectional design. The data collection is using Google Forms for survey creation and widespread online distribution. The Uses and Gratifications Theory (UGT) and Theory of Planned Behavior (TPB) serve as the theoretical foundations for this study. The analysis was conducted using IBM SPSS Statistics 27. The research findings revealed that the hypotheses of entertainment, influencer credibility, and sales promotion are accepted and significantly affect consumers’ purchase intentions. The study's contribution lies in shedding light on the effectiveness of Tik-Tok as an advertising platform in the context of the post-COVID-19 pandemic in Malaysia. It will provide valuable insights for marketers and businesses seeking to enhance their marketing strategies on Tik-Tok and optimize their reach to potential consumers. Keywords: Tik-tok, Advertising Content, And Purchase Intention, Post Covid-1

Pixel Value Graphical Password Scheme: K-Means as Graphical Password Fault Tolerance

Pixel value access control (PVAC) was introduced to deliver a secure and simple graphical password method where it requires users to load their image as their password. PVAC extracts the image to obtain a three-octet 8-bits Red-Green-Blue (RGB) value as its password to authenticate a user. The pixel value must be matched with the record stored in the database or otherwise, the user is failed to authenticate. However, users which prefer to store images on cloud storage would unintentionally alter and as well as the pixel value due to media compression and caused faulty pixels. Thus, the K-Means clustering algorithm is adapted to fix the issue where the faulty pixel value would be recognized as having the same pixel value cluster as the original. However, most of K-Means algorithm works were mainly developed for content-based image retrieval (CBIR) which having opposite characteristics from PVAC. Thus, this study was aimed to investigate the crucial criteria of PVAC and its compatibility with the K-Means algorithm for the problem. The theoretical analysis is used for this study where the suitable characteristics of K-Means are analyze based on PVAC requirements. The compliance analysis might become a referencing work for digital image clustering techniques adaptation on security system such as image filtering, image recognition, and object detection since most of image clustering works was focused on less sensitive image retrieval

Evaluation of toxicity and antibacterial activities of Andrographis paniculata herbal mouthwash against oral pathogens

Andrographis paniculata (AP) is an ancient herb known for its medicinal and therapeutic values. In this study, we aimed to evaluate the antibacterial activity and cytotoxicity of AP herbal mouthwash. Aqueous extract of AP was used to prepare the herbal mouthwash. The product was tested against selected oral pathogens namely Actinomyeces viscosus, Staphylococcus aureus, Streptococcus mutans, Streptococcus sobrinus, and Porphyromonas gingivalis for its antibacterial activity using the agar well diffusion method. Toxicity analysis was carried out and subjected to cytotoxicity screening using 3-(4,5-dimethylthiazol-2- yl)-2,5-diphenyl tetrazolium bromide (MTT) assay, in vivo study using brine shrimp lethality bioassay, and detection of heavy metals using atomic absorption spectroscopy (AAS). Five AP herbal mouthwash concentrations (62.5, 125, 250, 500, 1000 mg/mL) were developed. AP herbal mouthwash exhibited the strongest antibacterial activity against A. viscosus. AP herbal mouthwash (125 to 1000 mg/mL) showed inhibition against P. gingivalis, S. mutans and S. sobrinus, except for S. aureus which did not reflect any sign of antibacterial activity. In brine shrimp lethality bioassay, AP herbal mouthwash has LC50 3255.064 µg/ mL. In vitro cytotoxic evaluation was done on L929 mouse fibroblast cell lines using MTT assay with IC50 43.55 mg/mL denotes the mouthwash is non-toxic. Heavy metals content in AP herbal mouthwash falls within the permissible range of plumbum (2.50 ppm) followed by arsenic (1.875 ppm), mercury (0.15 ppm), and cadmium (0.06 ppm). Thus, verifying AP herbal mouthwash is effective in common oral pathogens and has a non-toxic effect

Hydrophobic mullite ceramic hollow fibre membrane (Hy-MHFM) for seawater desalination via direct contact membrane distillation (DCMD)

A low-cost hydrophobic mullite hollow fibre membrane (Hy-MHFM) fabricated via phase inversion/sintering technique followed by fluoroalkyl silane (FAS) grafting is presented in this study. The prepared CHFMs were characterized before and after the grafting step using different characterization techniques. The pore size of the CHFM surface was also determined using ImageJ software. The desalination performance of the grafted membrane was evaluated in direct contact membrane distillation (DCMD) using synthetic seawater of varying salt concentrations for 2 h at various feedwater temperatures. The outcome of the evaluations showed declines in the permeate flux of the membrane at increasing feed concentration, as well as increased flux with increased feed temperature. The long-term stability of the membrane was achieved at time 20 h, feed temperature 60 °C, and permeate temperature 10 °C, the membrane achieved a salt rejection performance of about 99.99 % and a water flux value of 22.51 kg/ m2 h

Mortality from gastrointestinal congenital anomalies at 264 hospitals in 74 low-income, middle-income, and high-income countries: a multicentre, international, prospective cohort study

Background: Congenital anomalies are the fifth leading cause of mortality in children younger than 5 years globally. Many gastrointestinal congenital anomalies are fatal without timely access to neonatal surgical care, but few studies have been done on these conditions in low-income and middle-income countries (LMICs). We compared outcomes of the seven most common gastrointestinal congenital anomalies in low-income, middle-income, and high-income countries globally, and identified factors associated with mortality. // Methods: We did a multicentre, international prospective cohort study of patients younger than 16 years, presenting to hospital for the first time with oesophageal atresia, congenital diaphragmatic hernia, intestinal atresia, gastroschisis, exomphalos, anorectal malformation, and Hirschsprung's disease. Recruitment was of consecutive patients for a minimum of 1 month between October, 2018, and April, 2019. We collected data on patient demographics, clinical status, interventions, and outcomes using the REDCap platform. Patients were followed up for 30 days after primary intervention, or 30 days after admission if they did not receive an intervention. The primary outcome was all-cause, in-hospital mortality for all conditions combined and each condition individually, stratified by country income status. We did a complete case analysis. // Findings: We included 3849 patients with 3975 study conditions (560 with oesophageal atresia, 448 with congenital diaphragmatic hernia, 681 with intestinal atresia, 453 with gastroschisis, 325 with exomphalos, 991 with anorectal malformation, and 517 with Hirschsprung's disease) from 264 hospitals (89 in high-income countries, 166 in middle-income countries, and nine in low-income countries) in 74 countries. Of the 3849 patients, 2231 (58·0%) were male. Median gestational age at birth was 38 weeks (IQR 36–39) and median bodyweight at presentation was 2·8 kg (2·3–3·3). Mortality among all patients was 37 (39·8%) of 93 in low-income countries, 583 (20·4%) of 2860 in middle-income countries, and 50 (5·6%) of 896 in high-income countries (p<0·0001 between all country income groups). Gastroschisis had the greatest difference in mortality between country income strata (nine [90·0%] of ten in low-income countries, 97 [31·9%] of 304 in middle-income countries, and two [1·4%] of 139 in high-income countries; p≤0·0001 between all country income groups). Factors significantly associated with higher mortality for all patients combined included country income status (low-income vs high-income countries, risk ratio 2·78 [95% CI 1·88–4·11], p<0·0001; middle-income vs high-income countries, 2·11 [1·59–2·79], p<0·0001), sepsis at presentation (1·20 [1·04–1·40], p=0·016), higher American Society of Anesthesiologists (ASA) score at primary intervention (ASA 4–5 vs ASA 1–2, 1·82 [1·40–2·35], p<0·0001; ASA 3 vs ASA 1–2, 1·58, [1·30–1·92], p<0·0001]), surgical safety checklist not used (1·39 [1·02–1·90], p=0·035), and ventilation or parenteral nutrition unavailable when needed (ventilation 1·96, [1·41–2·71], p=0·0001; parenteral nutrition 1·35, [1·05–1·74], p=0·018). Administration of parenteral nutrition (0·61, [0·47–0·79], p=0·0002) and use of a peripherally inserted central catheter (0·65 [0·50–0·86], p=0·0024) or percutaneous central line (0·69 [0·48–1·00], p=0·049) were associated with lower mortality. // Interpretation: Unacceptable differences in mortality exist for gastrointestinal congenital anomalies between low-income, middle-income, and high-income countries. Improving access to quality neonatal surgical care in LMICs will be vital to achieve Sustainable Development Goal 3.2 of ending preventable deaths in neonates and children younger than 5 years by 2030