192 research outputs found
Highly selective hydrogenation of furfural over supported Pt nanoparticles under mild conditions
The selective liquid phase hydrogenation of furfural to furfuryl alcohol over Pt nanoparticles supported on SiO₂, ZnO, γ-Al2O₃, CeO₂ is reported under extremely mild conditions. Ambient hydrogen pressure, and temperatures as low as 50 °C are shown sufficient to drive furfural hydrogenation with high conversion and >99% selectivity to furfuryl alcohol. Strong support and solvent dependencies are observed, with methanol and n-butanol proving excellent solvents for promoting high furfuryl alcohol yields over uniformly dispersed 4 nm Pt nanoparticles over MgO, CeO₂ and γ-Al₂O₃. In contrast, non-polar solvents conferred poor furfural conversion, while ethanol favored acetal by-product formation. Furfural selective hydrogenation can be tuned through controlling the oxide support, reaction solvent and temperature
High Output Cardiac Failure Caused by Popliteal Pseudoaneurysm and Arteriovenous Fistula Following Total Knee Replacement Simulating Severe Aortic Stenosis
The surface chemistry of nanocrystalline MgO catalysts for FAME production:an in situ XPS study of H2O, CH3OH and CH3OAc adsorption
An in situ XPS study of water, methanol and methyl acetate adsorption over as-synthesised and calcined MgO nanocatalysts is reported with a view to gaining insight into the surface adsorption of key components relevant to fatty acid methyl esters (biodiesel) production during the transesterification of triglycerides with methanol. High temperature calcined NanoMgO-700 adsorbed all three species more readily than the parent material due to the higher density of electron-rich (111) and (110) facets exposed over the larger crystallites. Water and methanol chemisorb over the NanoMgO-700 through the conversion of surface O2 − sites to OH− and coincident creation of Mg-OH or Mg-OCH3 moieties respectively. A model is proposed in which the dissociative chemisorption of methanol occurs preferentially over defect and edge sites of NanoMgO-700, with higher methanol coverages resulting in physisorption over weakly basic (100) facets. Methyl acetate undergoes more complex surface chemistry over NanoMgO-700, with C–H dissociation and ester cleavage forming surface hydroxyl and acetate species even at extremely low coverages, indicative of preferential adsorption at defects. Comparison of C 1s spectra with spent catalysts from tributyrin transesterification suggest that ester hydrolysis plays a key factor in the deactivation of MgO catalysts for biodiesel production
Beyond the simple Proximity Force Approximation: geometrical effects on the non-retarded Casimir interaction
We study the geometrical corrections to the simple Proximity Force
Approximation for the non-retarded Casimir force. We present analytical results
for the force between objects of various shapes and substrates, and between
pairs of objects. We compare the results to those from more exact numerical
calculations. We treat spheres, spheroids, cylinders, cubes, cones, and wings;
the analytical PFA results together with the geometrical correction factors are
summarized in a table.Comment: 18 pages, 19 figures, 1 tabl
Platinum catalysed aerobic selective oxidation of cinnamaldehyde to cinnamic acid
Aerobic selective oxidation of allylic aldehydes offers an atom and energy efficient route to unsaturated carboxylic acids, however suitable heterogeneous catalysts offering high selectivity and productivity have to date proved elusive. Herein, we demonstrate the direct aerobic oxidation of cinnamaldehyde to cinnamic acid employing silica supported Pt nanoparticles under base-free, batch and continuous flow operation. Surface and bulk characterisation of four families of related Pt/silica catalysts by XRD, XPS, HRTEM, CO chemisorption and N2 porosimetry evidence surface PtO2 as the common active site for cinnamaldehyde oxidation, with a common turnover frequency of 49,000 ± 600 h−1; competing cinnamaldehyde hydrogenolysis is favoured over metallic Pt. High area mesoporous (SBA-15 or KIT-6) and macroporous-mesoporous SBA-15 silicas confer significant rate and cinnamic acid yield enhancements versus low area fumed silica, due to superior platinum dispersion. High oxygen partial pressures and continuous flow operation stabilise PtO2 active sites against in-situ reduction and concomitant deactivation, further enhancing cinnamic acid productivity
Development of Ca/KIT-6 adsorbents for high temperature CO2 capture
The incorporation of CaO into an inert porous solid support has been identified as an effective approach to improve the stability of adsorbents for CO2 capture. In this work, we focus on enhancing the capacity of carbon capture and cyclic stability of CaO by impregnating CaO particles into a three-dimensional mesoporous silica (KIT-6) support. At a low CaO loading, the three-dimensional mesoporous support was filled with CaO nano-particles. The further increase of CaO loading resulted in the aggregation of CaO particles on the external surface of the support material, as identified by electron microscopy analysis. These CaO/KIT-6 adsorbents show excellent high-temperature CO2 carbonation/calcination stability over multiple cycles of CaO carbonation and calcination. The enhancement of the performance of carbon capture is attributed to the interaction between CaO and the silica skeleton of KIT-6 through the formation of interfacial CaSiO3 and Ca2SiO4 which enhanced the resistance of CaO sintering
Facile synthesis of hierarchical Cu2O nanocubes as visible light photocatalysts
Hierarchically structured Cu2O nanocubes have been synthesized by a facile and cost-effective one-pot, solution phase process. Self-assembly of 5 nm Cu2O nanocrystallites induced through reduction by glucose affords a mesoporous 375 nm cubic architecture with superior visible light photocatalytic performance in both methylene blue dye degradation and hydrogen production from water than conventional non-porous analogues. Hierarchical nanocubes offer improved accessible surface active sites and optical/electronic properties, which act in concert to confer 200–300% rate-enhancements for the photocatalytic decomposition of organic pollutants and solar fuels
Single atom Cu(I) promoted mesoporous titanias for photocatalytic Methyl Orange depollution and H 2 production
Tailoring the physicochemical properties and hence reactivity of semiconductor photocatalysts in a predictable fashion, remains a challenge to their industrial application. Here we demonstrate the striking promotional effect of incorporating single Cu(I) atoms, on aqueous phase photocatalytic dye degradation and H2 production over surfactant-templated mesoporous TiO2. X-ray absorption spectroscopy reveals that ultra-low concentrations of copper (0.02-0.1 wt%) introduced into the mesoporous TiO2 surface create isolated Cu (I) species which suppress charge recombination, and confer a six-fold photocatalytic promotion of Methyl Orange degradation and four-fold enhancement of H2 evolution. The impact of mesopore structure and photophysical properties on photocatalytic activity is also quantified for the first time: calcination increases mesopore size and nanocrystalline order, and induces an anatase to rutile phase transition that is accompanied by a decrease in the optical band gap, increased charge carrier lifetime, and a concomitant significant activity enhancement
XPS surface analysis of ceria-based materials: Experimental methods and considerations
X-ray photoelectron spectroscopy (XPS) analysis of cerium is ubiquitous amongst the catalytic and materials literature however errors in experimental procedure and data analysis are often easily proliferated. In this work we focus on the best practice for experimental construction when approaching the task of understanding chemical environments in cerium-based materials by XPS
- …