37,687 research outputs found
Atmospheric refraction effects on baseline error in satellite laser ranging systems
Because of the mathematical complexities involved in exact analyses of baseline errors, it is not easy to isolate atmospheric refraction effects; however, by making certain simplifying assumptions about the ranging system geometry, relatively simple expressions can be derived which relate the baseline errors directly to the refraction errors. The results indicate that even in the absence of other errors, the baseline error for intercontinental baselines can be more than an order of magnitude larger than the refraction error
An analysis of turbulent diffusion flame in axisymmetric jet
The kinetic theory of turbulent flow was employed to study the mixing limited combustion of hydrogen in axisymmetric jets. The integro-differential equations in two spatial and three velocity coordinates describing the combustion were reduced to a set of hyperbolic partial differential equations in the two spatial coordinates by a binodal approximation. The MacCormick's finite difference method was then employed for solution. The flame length was longer than that predicted by the flame-sheet analysis, and was found to be in general agreement with a recent experimental result. Increase of the turbulence energy and scale resulted in an enhancement of the combustion rate and, hence, in a shorter flame length. Details of the numerical method as well as of the physical findings are discussed
Stress-Induced Delamination Of Through Silicon Via Structures
Continuous scaling of on-chip wiring structures has brought significant challenges for materials and processes beyond the 32 nm technology node in microelectronics. Recently three-dimensional (3-D) integration with through-silicon-vias (TSVs) has emerged as an effective solution to meet the future interconnect requirement. Thermo-mechanical reliability is a key concern for the development of TSV structures used in die stacking as 3-D interconnects. This paper examines the effect of thermal stresses on interfacial reliability of TSV structures. First, the three-dimensional distribution of the thermal stress near the TSV and the wafer surface is analyzed. Using a linear superposition method, a semi-analytic solution is developed for a simplified structure consisting of a single TSV embedded in a silicon (Si) wafer. The solution is verified for relatively thick wafers by comparing to numerical results obtained by finite element analysis (FEA). Results from the stress analysis suggest interfacial delamination as a potential failure mechanism for the TSV structure. Analytical solutions for various TSV designs are then obtained for the steady-state energy release rate as an upper bound for the interfacial fracture driving force, while the effect of crack length is evaluated numerically by FEA. Based on these results, the effects of TSV designs and via material properties on the interfacial reliability are elucidated. Finally, potential failure mechanisms for TSV pop-up due to interfacial fracture are discussed.Aerospace Engineerin
Analysis of short pulse laser altimetry data obtained over horizontal path
Recent pulsed measurements of atmospheric delay obtained by ranging to the more realistic targets including a simulated ocean target and an extended plate target are discussed. These measurements are used to estimate the expected timing accuracy of a correlation receiver system. The experimental work was conducted using a pulsed two color laser altimeter
Higgs bosons of a supersymmetric model at the Large Hadron Collider
It is found that CP symmetry may be explicitly broken in the Higgs sector of
a supersymmetric model with two extra neutral gauge bosons at the
one-loop level. The phenomenology of the model, the Higgs sector in particular,
is studied for a reasonable parameter space of the model, in the presence of
explicit CP violation at the one-loop level. At least one of the neutral Higgs
bosons of the model might be produced via the fusion process at the Large
Hadron Collider.Comment: 23 pages, 5 figures, JHE
Recommended from our members
Thermomechanical Reliability Challenges For 3D Interconnects With Through-Silicon Vias
Continual scaling of on-chip wiring structures has brought significant challenges for materials and processes beyond the 32 nm technology node in microelectronics. Recently threedimensional (3-D) integration with through-silicon-vias (TSVs) has emerged as an effective solution to meet the future interconnect requirement. Among others, thermo-mechanical reliability is a key concern for the development of TSV structures used in die stacking as 3-D interconnects. This paper examines the effects of thermally induced stresses on interfacial reliability of TSV structures. First, three-dimensional distribution of the thermal stress near the TSV and the wafer surface is analyzed. Using a linear superposition method, a semi-analytic solution is developed for a simplified structure consisting of a single TSV embedded in a silicon (Si) wafer. The solution is verified for relatively thick wafers by comparing to numerical results From finite element analysis (FEA). The stress analysis suggests interfacial delamination as a potential failure mechanism for the TSV structure. An analytical solution is then obtained for the steady-state energy release rate as the upper bound for the interfacial fracture driving force, while the effect of crack length is evaluated numerically by FEA. With these results, the effects of the TSV dimensions (e.g., via diameter and wafer thickness) on the interfacial reliability are elucidated. Furthermore, the effects of via material properties are discussed.Aerospace Engineerin
Photonic crystal thin films of GaAs prepared by atomic layer deposition
Photonic crystal thin films were fabricated via the self-assembly of a lattice of silica spheres on silicon (100) substrates. Progressive infilling of the air spaces within the structure with GaAs was achieved using trimethylgallium and arsine under atomic-layer-deposition conditions. Samples with the highest levels of GaAs infill were subsequently inverted using selective etching. Reflectance spectra are interpreted via the Bragg expression and calculated photonic band structure diagrams. For GaAs infilled and inverted samples, the relative positions of the first and second order Bragg reflections are strongly influenced by the wavelength dependent refractive index
Recommended from our members
Imbibition dynamics of nano-particulate ink-jet drops on micro-porous media
Ink-jet printing of nano-metallic colloidal fluids on to
porous media such as coated papers has become a viable
method to produce conductive tracks for low-cost,
disposable printed electronic devices. However, the
formation of well-defined and functional tracks on an
absorbing surface is controlled by the drop imbibition
dynamics in addition to the well-studied post-impact drop
spreading behavior.
This study represents the first investigation of the realtime
imbibition of ink-jet deposited nano-Cu colloid drops
on to coated paper substrates. In addition, the same ink was
deposited on to a non-porous polymer surface as a control
substrate. By using high-speed video imaging to capture the
deposition of ink-jet drops, the time-scales of drop
spreading and imbibition were quantified and compared
with model predictions. The influences of the coating pore
size on the bulk absorption rate and nano-Cu particle
distribution have also been studied
Characterization Of Thermal Stresses And Plasticity In Through-Silicon Via Structures For Three-Dimensional Integration
Through-silicon via (TSV) is a critical element connecting stacked dies in three-dimensional (3D) integration. The mismatch of thermal expansion coefficients between the Cu via and Si can generate significant stresses in the TSV structure to cause reliability problems. In this study, the thermal stress in the TSV structure was measured by the wafer curvature method and its unique stress characteristics were compared to that of a Cu thin film structure. The thermo-mechanical characteristics of the Cu TSV structure were correlated to microstructure evolution during thermal cycling and the local plasticity in Cu in a triaxial stress state. These findings were confirmed by microstructure analysis of the Cu vias and finite element analysis (FEA) of the stress characteristics. In addition, the local plasticity and deformation in and around individual TSVs were measured by synchrotron x-ray microdiffraction to supplement the wafer curvature measurements. The importance and implication of the local plasticity and residual stress on TSV reliabilities are discussed for TSV extrusion and device keep-out zone (KOZ).Microelectronics Research Cente
Camera for QUasars in EArly uNiverse (CQUEAN)
We describe the overall characteristics and the performance of an optical CCD
camera system, Camera for QUasars in EArly uNiverse (CQUEAN), which is being
used at the 2.1 m Otto Struve Telescope of the McDonald Observatory since 2010
August. CQUEAN was developed for follow-up imaging observations of red sources
such as high redshift quasar candidates (z >= 5), Gamma Ray Bursts, brown
dwarfs, and young stellar objects. For efficient observations of the red
objects, CQUEAN has a science camera with a deep depletion CCD chip which
boasts a higher quantum efficiency at 0.7 - 1.1 um than conventional CCD chips.
The camera was developed in a short time scale (~ one year), and has been
working reliably. By employing an auto-guiding system and a focal reducer to
enhance the field of view on the classical Cassegrain focus, we achieve a
stable guiding in 20 minute exposures, an imaging quality with FWHM >= 0.6"
over the whole field (4.8' * 4.8'), and a limiting magnitude of z = 23.4 AB mag
at 5-sigma with one hour total integration time.Comment: Accepted for publication in PASP. 26 pages including 5 tables and 24
figure
- …