3,546 research outputs found
Energy reconstruction in a highly granularity semi-digital hadronic calorimeter
International audienceThe Semi-Digital Hadronic CALorimeter(SDHCAL) using Glass Resistive Plate Chambers (GRPCs) is one of the calorimeters proposed for particle physics experiments at the future electron-positron collider. It is a high granularity calorimeter which is required for the application of the particle flow algorithm in order to improve the jet energy resolution as one of the goals of this experiments. We discuss the energy reconstruction, based on digital and semi-Digital methods, to study the effect on the improvement of the single particle energy resolution and the linearity of the detecor response. This study was performed with the GEANT4 simulation. Results on the energy resolution and linearity, for negative pions over an energy range from 1 to 100 GeV are presented and compared with different energy reconstruction methods including Artificial Neural Networks. 1. Introduction The CALICE collaboration [1] has developed several calorimeter prototypes to evaluate the most appropriate one to be used in the future Linear Collider. One of them is the semi-digital hadronic calorimeter (SDHCAL) constructed in IPNL with the collaboration of other laboratories. In this paper we first present the geometry of this prototype used in simulation. Then, we present the different techniques of energy reconstruction used in SDHCAL. Finally, the results of the energy resolution and linearity obtained are presented and commented upon
First test of a power-pulsed electronics system on a GRPC detector in a 3-Tesla magnetic field
An important technological step towards the realization of an ultra-granular
hadronic calorimeter to be used in the future International Linear Collider
(ILC) experiments has been made. A 33X50 cm2 GRPC detector equipped with a
power-pulsed electronics board offering a 1cm2 lateral segmentation was
successfully tested in a 3-Tesla magnet operating at the H2 beam line of the
CERN SPS. An important reduction of power consumption with no deterioration of
the detector performance is obtained when the power-pulsing mode is applied.
This important result shows that ultra-granular calorimeters for ILC
experiments are not only an attractive but also a realistic option.Comment: 10 pages, 9 figure
High-speed analysis of nuclear emulsion films with the use of dry objective lenses
The extensive use of nuclear emulsions as precise tracking detectors in experimental physics has been made possible due to recent advances in the production of novel emulsion films and to the development of automatic scanning devices. The scanning speed of such systems has exceeded the level of 20 cm2 of emulsion surface per hour. High-speed automatic scanning systems, such as those developed by the OPERA Collaboration, are able to reconstruct particle tracks in nuclear emulsions with excellent accuracy. However, the high-magnification oil immersion objectives used in these systems assume deposition and removal of oil onto and from the emulsion films. This is a major technological obstacle in the automatization of the emulsion feeding to the microscope, as required for large scale use as in the case of the OPERA neutrino oscillation experiment. In order to overcome this problem, an innovative technique of nuclear emulsion films scanning with the use of dry objective lenses has been developed and successfully applied to the experiment
Search for spontaneous muon emission from lead nuclei
We describe a possible search for muonic radioactivity from lead nuclei using
the base elements ("bricks" composed by lead and nuclear emulsion sheets) of
the long-baseline OPERA neutrino experiment. We present the results of a Monte
Carlo simulation concerning the expected event topologies and estimates of the
background events. Using few bricks, we could reach a good sensitivity level.Comment: 12 pages, 4 figure
Performance of Glass Resistive Plate Chambers for a high granularity semi-digital calorimeter
A new design of highly granular hadronic calorimeter using Glass Resistive
Plate Chambers (GRPCs) with embedded electronics has been proposed for the
future International Linear Collider (ILC) experiments. It features a 2-bit
threshold semi-digital read-out. Several GRPC prototypes with their electronics
have been successfully built and tested in pion beams. The design of these
detectors is presented along with the test results on efficiency, pad
multiplicity, stability and reproducibility.Comment: 16 pages, 15 figure
Inner structure of the Puy de Dˆome volcano: cross-comparison of geophysical models (ERT, gravimetry, muon imaging)
International audienceMuon imaging of volcanoes and of geological structures in general is actively being developed by several groups in the world. It has the potential to provide 3-D density distributions with an accuracy of a few percent. At this stage of development, comparisons with established geophysical methods are useful to validate the method. An experiment has been carried out in 2011 and 2012 on a large trachytic dome, the Puy de Dˆome volcano, to perform such a comparison of muon imaging with gravimetric tomography and 2-D electrical resistivity tomography. Here, we present the preliminary results for the last two methods. North-south and east-west resistivity profiles allow us to model the resistivity distribution down to the base of the dome. The modelling of the Bouguer anomaly provides models for the density distribution within the dome that are directly comparable with the results from the muon imaging. Our ultimate goal is to derive a model of the dome using the joint interpretation of all sets of data
Air shower simulation for background estimation in muon tomography of volcanoes
International audienceOne of the main sources of background for the radiography of volcanoes using atmospheric muons comes from the accidental coincidences produced in the muon telescopes by charged particles belonging to the air shower generated by the primary cosmic ray. In order to quantify this background effect, Monte Carlo simulations of the showers and of the detector are developed by the TOMUVOL collaboration. As a first step, the atmospheric showers were simulated and investigated using two Monte Carlo packages, CORSIKA and GEANT4.We compared the results provided by the two programs for the muonic component of vertical proton-induced showers at three energies: 1, 10 and 100 TeV. We found that the spatial distribution and energy spectrum of the muons were in good agreement for the two codes
- …