547 research outputs found
A transient high-coherence oscillation in 4U 1820-30
We re-analyzed two Rossi X-Ray Timing Explorer archival observations of the
atoll source 4U 1820-30 in order to investigate the detailed time-frequency
properties of the source during the intervals when a ~7 Hz QPO was detected by
Wijnands et al. (1999, ApJ, 512, L39). We find that in both observations, in
addition to a QPO signal lasting a couple of minutes as previously reported,
there is a much narrower transient oscillation with a life time of only a few
seconds. Within this time, the oscillation is consistent with being coherent.
Its integrated fractional rms is around 10% and its frequency 7.3 Hz and 5.7 Hz
in the two observations. We discuss the possible association of this QPO with
other oscillations known both in Neutron-Star and Black-Hole systems,
concentrating on the similarities with the narrow 5-7 Hz oscillations observed
at high flux in Black-Hole Candidates.Comment: 5 pages, 3 figures, accepted for publication in A&A. FIgure 1 is
reduced in resolution, full-resolution version of this text available at
http://www.merate.mi.astro.it/~belloni/ms0335.ps.g
Recommended from our members
The effect of testing procedure on DSC measurements of Gd-Ti-Zr alloy using ZrO2 container
Differential Scanning Calorimetry (DSC) was applied to determine the critical temperatures of phase transformations in the Gd40Ti30Zr30 alloy (wt%). The comparative measurements were carried out using three types of measuring devices at a temperature RT- 1650°C in the same flowing gas (Ar, 99.9992%) but applying different testing procedures, which allowed obtaining dissimilar oxygen contents in the surrounding atmosphere. The high temperature interaction and reactivity taking place between molten alloy samples and ZrO2 container during DSC tests were evaluated by structural analysis of the resulting interfaces using alloy samples solidified inside the ZrO2 containers. The conducted research has demonstrated methodological difficulties accompanying measurements of the thermophysical properties of Gd-rich alloys by the container-assisted DSC method, particularly when the tests are performed in flowing argon atmosphere with significantly reduced oxygen content. Under non-oxidizing conditions, the degradation of ZrO2 container can take place during DSC testing because the selected Gd40Ti30Zr30 alloy reacts with the ZrO2 to form a continuous interfacial reaction product layer. Under slightly oxidizing conditions, the gadolinium oxide formed in situ on the alloy surface, plays the role of a barrier for direct contact between molten alloy and container and thus may suppress or even prevent the degradation of the container and its subsequent strong bonding with the holder
X-ray Nova XTE J1550-564: RXTE Spectral Observations
Excellent coverage of the 1998 outburst of the X-ray Nova XTE J1550-564 was
provided by the Rossi X-ray Timing Explorer. XTE J1550-564 exhibited an intense
(6.8 Crab) flare on 1998 September 19 (UT), making it the brightest new X-ray
source observed with RXTE. We present a spectral analysis utilizing 60
Proportional Counter Array spectra from 2.5-20 keV spanning 71 days, and a
nearly continuous All Sky Monitor light curve. The spectra were fit to a model
including multicolor blackbody disk and power-law components. XTE J1550-564 is
observed in the very high, high/soft, and intermediate canonical outburst
states of Black Hole X-ray Novae.Comment: 14 pages including 1 table and 4 figures, Accepted to ApJ Letter
Recommended from our members
Wetting behaviour and reactivity between liquid Gd and ZrO2 substrate
The wetting behavior and reactivity between molten pure Gd and polycrystalline 3YSZ substrate (ZrO2 stabilized with 3 wt% of Y2O3)were experimentally determined by a sessile drop method using a classical contact heating coupled with drop pushing procedure. The test was performed under an inert flowing gas atmosphere (Ar) at two temperatures of 1362°C and 1412°C. Immediately after melting (Tm=1341°C), liquid Gd did not wet the substrate forming a contact angle of Ξ=141°. The non-wetting to wetting transition (Ξ < 90°) took place after about 110 seconds of interaction and was accompanied by a sudden decrease in the contact angle value to 67°. Further heating of the couple to 1412 °C did not affect wetting (Ξ=67°±1°). The solidified Gd/3YSZ couple was studied by means of optical microscopy and scanning electron microscopy coupled with X-ray energy dispersive spectroscopy. Structural investigations revealed that the wettability in the Gd/3YSZ system is of a reactive nature associated with the formation of a continuous layer of a wettable reaction product Gd2Zr2O7
Complete RXTE Spectral Observations of the Black Hole X-ray Nova XTE J1550-564
We report on the X-ray spectral behavior of the exceptionally bright X-ray
nova XTE J1550-564 during its 1998-99 outburst. Our study is based on 209
pointed observations using the PCA and HEXTE instruments onboard the Rossi
X-ray Timing Explorer spanning 250 days and covering the entire double-peaked
eruption that occurred from 1998 September until 1999 May. The spectra are fit
to a model including multicolor blackbody disk and power-law components. The
source is observed in the very high and high/soft outburst states of black hole
X-ray novae. During the very high state, when the power-law component dominated
the spectrum, the inner disk radius is observed to vary by more than an order
of magnitude; the radius decreased by a factor of 16 in one day during a 6.8
Crab flare. If the larger of these observed radii is taken to be the last
stable orbit, then the smaller observed radius would imply that the inner edge
of the disk is inside the event horizon! However, we conclude that the apparent
variations of the inner disk radius observed during periods of increased
power-law emission are probably caused by the failure of the multicolor
disk/power-law model; the actual physical radius of the inner disk may remain
fairly constant. This interpretation is supported by the fact that the observed
inner disk radius remains approximately constant over 120 days in the high
state, when the power-law component is weak, even though the disk flux and
total flux vary by an order of magnitude. The mass of the black hole inferred
by equating the approximately constant inner disk radius observed in the
high/soft state with the last stable orbit for a Schwarzschild black hole is
M_BH = 7.4 M_sun (D/6 kpc) (cos i)^{-1/2}.Comment: Submitted to ApJ, 20 pages including 6 figures + 4 large table
Wettability and reactivity of ZrB2 substrates with liquid Al
Wetting characteristics of the Al/ZrB2 system were experimentally determined by the sessile drop method with application of separate heating of the ZrB2 and Al samples and combined with in situ cleaning of Al drop from native oxide film directly in vacuum chamber. The tests were performed in ultrahigh vacuum of 10â6 mbar at temperatures 710, 800, and 900 °C as well as in flowing inert gas (Ar) atmosphere at 1400 °C. The results evidenced that liquid Al does not wet ZrB2 substrate at 710 and 800 °C, forming high contact angles (Ξ) of 128° and 120°, respectively. At 900 °C, wetting phenomenon (Ξ < 90°) occurs in 29th minute and the contact angle decreases monotonically to the final value of 80°. At 1400 °C, wetting takes place immediately after drop deposition with a fast decrease in the contact angle to 76°. The solidified Al/ZrB2 couples were studied by scanning and transmission electron microscopy coupled with x-ray energy diffraction spectroscopy. Structural characterization revealed that only in the Al/ZrB2 couple produced at the highest temperature of 1400 °C new phases (Al3Zr, AlB2 and α-Al2O3) were formed
Changes in plasma free fatty acids associated with type-2 diabetes
This research was funded by the British Heart Foundation, grant numbers PG/15/9/31270 and FS/15/42/3155 and by the Leverhulme Trust, grant number RPG-2017-214.Type 2 diabetes mellitus (T2DM) is associated with increased total plasma free fatty acid (FFA) concentrations and an elevated risk of cardiovascular disease. The exact mechanisms by which the plasma FFA profile of subjects with T2DM changes is unclear, but it is thought that dietary fats and changes to lipid metabolism are likely to contribute. Therefore, establishing the changes in concentrations of specific FFAs in an individualâs plasma is important. Each type of FFA has different effects on physiological processes, including the regulation of lipolysis and lipogenesis in adipose tissue, inflammation, endocrine signalling and the composition and properties of cellular membranes. Alterations in such processes due to altered plasma FFA concentrations/profiles can potentially result in the development of insulin resistance and coagulatory defects. Finally, fibrates and statins, lipid-regulating drugs prescribed to subjects with T2DM, are also thought to exert part of their beneficial effects by impacting on plasma FFA concentrations. Thus, it is also interesting to consider their effects on the concentration of FFAs in plasma. Collectively, we review how FFAs are altered in T2DM and explore the likely downstream physiological and pathological implications of such changes.Publisher PDFPeer reviewe
Gold catalysts supported on ceria doped by rare earth metals for water gas shift reaction: Influence of the preparation method
Cataloged from PDF version of article.Gold catalysts based on ceria, doped by various RE metals (La, Sm, Gd, Yb, Y) were studied. The influence of the preparation methods on structure, properties and catalytic activity in the WGS reaction was investigated. The catalysts' supports were prepared using two different methods: co-precipitation (CP) and mechanochemical activation (MA). The catalysts were tested in a wide temperature interval without and after reactivation. All samples were characterized using a combination of X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), Raman spectroscopy (RS) and X-ray photoelectron spectroscopy (XPS) and TPR. It was found that the catalytic activity of MA catalysts is higher than CP ones. The gold catalysts based on ceria doped by Yb and Sm exhibited the highest activity. After reactivation in air the MA samples almost kept the WGS activity same, while the CP catalysts increased it. The catalysts of a single- and double-phase structure are formed as a result of CP and MA preparation, respectively. There are no big differences in the gold particles size (2-3 nm) depending on dopants and on the preparation techniques. The RS spectra analysis indicates that most probably the oxygen vacancies are adjacent to Me(3+) dopant and the ceria structure seems to be better ordered than in the case of alumina as a dopant. There is no distinct correlation between reducibility and WGS activity. The XPS analysis disclose positively charged gold particles in addition to metallic gold within a surface region of fresh samples and only metallic gold on the samples after catalytic processing. There is no simple correlation between the concentration of Ce(3+) in the samples and their WGS activity. (C) 2009 Elsevier B.V. All rights reserved
Investigation of the factors influencing spinal manipulative therapy force transmission through the thorax: A cadaveric study
Abstract
Spinal manipulative therapy (SMT) clinical effects are believed to be linked to its forceâtime profile characteristics. Previous studies have revealed that the force measured at the patient-table interface is most commonly greater than the one applied at the clinician-patient interface. The factors explaining this force amplification remains unclear.
Objective
To determine the difference between the force applied to a cadaveric specimenâs thoracic spine and the resulting force measured by a force-sensing table, as well as to evaluate the relationship between this difference and both the SMT forceâtime characteristics and the specimensâ characteristics.
Methods
Twenty-five SMTs with different forceâtime profiles were delivered by an apparatus at the T7 vertebra of nine human cadaveric specimens lying prone on a treatment table equipped with a force plate. The difference between the force applied by the apparatus and the resulting force measured by the force plate was calculated in absolute force (Fdiff) and as the percentage of the applied force (Fdiff%). Kinematics markers were inserted into T6 to T8 spinous and transverse processes to evaluate vertebral displacements during the SMT thrusts. Mixed-effects linear models were run to evaluate the variance in Fdiff and Fdiff% explained by SMT characteristics (peak force, thrust duration and force application rate), T6 to T8 relative and total displacements, and specimensâ characteristics (BMI, height, weight, kyphosis angle, thoracic thickness).
Results
Sixty percent of the trials showed lower force measured at the force plate than the one applied at T7. Fdiffž was significantly predicted (R2marginalâ=â0.54) by peak force, thrust duration, thoracic thickness and T6âT7 relative displacement in the z-axis (postero-anterior). Fdiff% was significantly predicted (R2marginalâ=â0.56) by force application rate, thoracic thickness and total T6 displacements. For both dependant variables, thoracic thickness showed the highest R2marginal out of all predictors.
Conclusion
Difference in force between the clinician-patient and the patient-table interfaces is influenced by SMT forceâtime characteristics and by thoracic thickness. How these differences in force are associated with vertebral displacements remains unclear. Although further studies are needed, clinicians should consider thorax thickness as a possible modulator of forces being transmitted through it during prone SMT procedures
Broadband X-ray spectrum of XTE J1550-564 during 2003 outburst
Results of broadband INTEGRAL and RXTE observations of the Galactic
microquasar XTE J1550-564 during outburst in spring 2003 are presented. During
the outburst the source was found in a canonical low/hard spectral state.Comment: 5 pages, 3 figures. Accepted for publication in Astronomy Letter
- âŠ