52 research outputs found
3DâPrinted Porous Organic Cages for Gas Filtration: Fabrication and Flow Simulations
AbstractPorous organic cages (POCs) are a class of emerging porous materials with high porosity and selectivity for gas adsorption and separation. As a representative of firstâgeneration POCs, the cage molecule CC3, has huge potential for separating noble gases and volatile organic compounds (VOCs). 3D printing CC3 using direct ink writing (DIW) offers significant advantages to build complex structures. Through rational design, formulations that are both printable and functional are achieved. Optimised formulations have the elastoâviscoâplastic behavior required while retaining the functional properties of the cages. The characterization of printed parts evidence that the CC3 structure and adsorption capacity are well preserved. BET surface areas vary with CC3 concentration and can reach up to â249 m2 gâ1 for 70 wt% CC3. However, high CC3 content leads to a decrease in shrinkage, higher porosity, and low compressive strength â0.7 MPa. Computational fluid dynamics (CFD) is used to investigate the gas flow behavior through gridâtype structures with tailored geometric parameters. The results reveal that changing the offset distance and porosity manipulates the flow path, velocity distribution, and pressure drop. This work provides a pathway to design and fabricate structures with multiâscale porosity that can be widely used for other functional materials and applications.</jats:p
Precipitable water vapour content above the Roque de los Muchachos observatory from GPS estimations
ABSTRACT The requirements for current large and future extremely large telescopes as well as the quick development of IR instrumentation demand a proper characterization of precipitable water vapour (PWV) above astronomical sites. A comparison of PWV estimations from a photometer and a GPS (Global Positioning System) above the Observatorio del Roque de los Muchachos (ORM, La Palma, Canary Islands, Spain) was carried out and it was found a linear relation between both measurements. Such relationship will allow the calibration of the GPS measurements recorded at ORM for the period June 2001-December 2008. These large time series of PWV estimations from GPS were used to perform a statistical analysis of water vapour content above this astronomical site. Average annual value of night-time PWV of 4.86 mm was found. It was also found a clear seasonal behavior of the PWV above ORM, with smaller water-vapour columns during winter nights (average 3.36 mm). The largest values of PWV are reached in the summer nights (average 6.75 mm). The data indicate that a significant percentage of nights (~38%) are well suited for thermal infrared observations (with PWV < 3 mm), and 71% of nights present a "fair" or better IR observation opportunity at ORM
The PAU survey: classifying low-z SEDs using Machine Learning clustering
This is a pre-copyedited, author-produced PDF of an article accepted for publication in Monthly Notices of the Royal Astronomical Society following peer review. The version of record Monthly Notices of the Royal Astronomical Society 524.3 (2023): 3569-3581
is available online at: https://academic.oup.com/mnras/article-abstract/524/3/3569/7225529?redirectedFrom=fulltextWe present an application of unsupervised Machine Learning clustering to the PAU survey of galaxy spectral energy distribution (SED) within the COSMOS field. The clustering algorithm is implemented and optimized to get the relevant groups in the data SEDs. We find 12 groups from a total number of 5234 targets in the survey at 0.01 < z < 0.28. Among the groups, 3545 galaxies (68 per cent) show emission lines in the SEDs. These groups also include 1689 old galaxies with no active star formation. We have fitted the SED to every single galaxy in each group with CIGALE. The mass, age, and specific star formation rates (sSFR) of the galaxies range from 0.15 < age/Gyr <11; 6 < log (M/Mâ) <11.26, and -14.67 < log (sSFR/yr-1) <-8. The groups are well-defined in their properties with galaxies having clear emission lines also having lower mass, are younger and have higher sSFR than those with elliptical like patterns. The characteristic values of galaxies showing clear emission lines are in agreement with the literature for starburst galaxies in COSMOS and GOODS-N fields at low redshift. The star-forming main sequence, sSFR versus stellar mass and UVJ diagram show clearly that different groups fall into different regions with some overlap among groups. Our main result is that the joint of low- resolution (R âŒ50) photometric spectra provided by the PAU survey together with the unsupervised classification provides an excellent way to classify galaxies. Moreover, it helps to find and extend the analysis of extreme ELGs to lower masses and lower SFRs in the local UniverseThis work has been supported by the Ministry of Science and Innovation of Spain, project PID2019-107408GB-C43 (ESTALLIDOS), and the Government of the Canary Islands through EU FEDER funding, projects PID2020010050 and PID2021010077. This article is based on observations made in the Observatorios de Canarias of the Instituto de AstrofĂsica de Canarias (IAC) with the WHT operated on the island of La Palma by the Isaac Newton Group of Telescopes (ING) in the Observatorio del Roque de los Muchachos. The PAU Survey is partially supported by MINECO under grants CSD2007-00060, AYA2015-71825, ESP2017-89838, PGC2018-094773, PGC2018-102021, PID2019-111317GB, SEV-2016-0588, SEV-2016-0597, MDM-2015-0509 and Juan de la Cierva fellowship and LACEGAL and EWC Marie Sklodowska-Curie grant No 734374 and no.776247 with ERDF funds from the EU Horizon 2020 Programme, some of which include ERDF funds from the European Union. IEEC and IFAE are partially funded by the CERCA and Beatriu de Pinos program of the Generalitat de Catalunya. Funding for PAUS has also been provided by Durham Univer sity (via the ERC StG DEGAS-259586), ETH Zurich, Leiden University (via ERC StG ADULT-279396 and Netherlands Organisation for Scientific Research (NWO) Vici grant 639.043.512), University College London and from the European Unionâs Horizon 2020 research and innovation programme under the grant agreement No 776247 EWC. The PAU data center is hosted by the Port dâInformaciĂłn CientĂfica (PIC), maintained through a collaboration of CIEMAT and IFAE, with additional support from Universitat AutĂłnoma de Barcelona and ERDF. We acknowledge the PIC services department team for their support and fruitful discussion
Influence of IFN-gamma and its receptors in human breast cancer
<p>Abstract</p> <p>Background</p> <p>Interferons are a group of proteins that trigger multiple responses including prevention of viral replication, inhibition of cell growth, and modulation of cell differentiation. In different mammary carcinoma cell lines IFNÎł induces growth arrest at mid-G1. At the present there are no <it>in vivo </it>studies in human breast. The aim of this study was to investigate the expression patterns of IFNÎł and its two receptors (IFNÎł-Rα and IFNÎł-RÎČ) by Western blot and immunohistochemistry, in order to elucidate its role in the different types of human breast cancer (<it>in situ </it>and infiltrative).</p> <p>Methods</p> <p>Immunohistochemical and semiquantitative study of IFNÎł, its receptors types (IFNÎł-Rα and IFNÎł-RÎČ), cell proliferation (proliferating cell nuclear antigen, also named PCNA), and apoptosis (TUNEL method) was carried between the three breast groups (fibrocystic lesions, <it>in situ</it> tumors and infiltrating tumors).</p> <p>Results</p> <p>In the three groups of patients, IFNÎł and IFNÎł-Rα immunoreactions appeared in the cytoplasm while IFNÎł-RÎČ also was found in the nucleus. The optical density to IFNÎł was higher in <it>in situ </it>carcinoma than in benign and infiltrating tumors. When we observed IFNÎł-Rα, the optical density was lower in infiltrating carcinoma than in benign and <it>in situ </it>tumors (the higher density). To IFNÎł-RÎČ, the optical density was similar in the three group samples. In tumor samples PCNA and TUNEL index was significantly higher; than in benign diseases. PCNA index increased with the malignance. No significant differences were found between cancer types to TUNEL. IFNÎł could be a potential therapeutic tool in breast cancer. However, tumor cells are able to escape from the control of this cytokine in the early tumor stages; this is probably due to a decreased expression of IFNÎł, or also to an alteration of either its receptors or some transduction elements.</p> <p>Conclusion</p> <p>We conclude that the decrease in the % positive samples that expressed IFNÎł and IFNÎł-Rα together with the nuclear localization of IFNÎł-RÎČ, could be a tumoral cell response, although perhaps insufficient to inhibit the uncontrolled cell proliferation. Perhaps, IFNÎł might be unable to activate p21 to stop the cell cycle, suggesting a possible participation in breast cancer development.</p
MEGARA, the new intermediate-resolution optical IFU and MOS for GTC: getting ready for the telescope
MEGARA (Multi-EspectrĂłgrafo en GTC de Alta ResoluciĂłn para AstronomĂa) is an optical Integral-Field Unit (IFU) and Multi-Object Spectrograph (MOS) designed for the GTC 10.4m telescope in La Palma that is being built by a Consortium led by UCM (Spain) that also includes INAOE (Mexico), IAA-CSIC (Spain), and UPM (Spain). The instrument is currently finishing AIV and will be sent to GTC on November 2016 for its on-sky commissioning on April 2017. The MEGARA IFU fiber bundle (LCB) covers 12.5x11.3 arcsec2 with a spaxel size of 0.62 arcsec while the MEGARA MOS mode allows observing up to 92 objects in a region of 3.5x3.5 arcmin2 around the IFU. The IFU and MOS modes of MEGARA will provide identical intermediate-to-high spectral resolutions (RFWHM~6,000, 12,000 and 18,700, respectively for the low-, mid- and high-resolution Volume Phase Holographic gratings) in the range 3700-9800Ă
Ă
. An x-y mechanism placed at the pseudo-slit position allows (1) exchanging between the two observing modes and (2) focusing the spectrograph for each VPH setup. The spectrograph is a collimator-camera system that has a total of 11 VPHs simultaneously available (out of the 18 VPHs designed and being built) that are placed in the pupil by means of a wheel and an insertion mechanism. The custom-made cryostat hosts a 4kx4k 15-ÎŒm CCD. The unique characteristics of MEGARA in terms of throughput and versatility and the unsurpassed collecting are of GTC make of this instrument the most efficient tool to date to analyze astrophysical objects at intermediate spectral resolutions. In these proceedings we present a summary of the instrument characteristics and the results from the AIV phase. All subsystems have been successfully integrated and the system-level AIV phase is progressing as expected
Comparison of Physical-chemical and Mechanical Properties of Chlorapatite and Hydroxyapatite Plasma Sprayed Coatings
Chlorapatite can be considered a potential biomaterial for orthopaedic applications. Its use as plasma-sprayed coating could be of interest considering its thermal properties and particularly its ability to melt without decomposition unlike hydroxyapatite. Chlorapatite (ClA) was synthesized by a high-temperature ion exchange reaction starting from commercial stoichiometric hydroxyapatites (HA). The ClA powder showed similar characteristics as the original industrial HA powder, and was obtained in the monoclinic form. The HA and ClA powders were plasma-sprayed using a low-energy plasma spraying system with identical processing parameters. The coatings were characterized by physical-chemical methods, i.e. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy, including distribution mapping of the main phases detected such as amorphous calcium phosphate (ACP), oxyapatite (OA), and HA or ClA. The unexpected formation of oxyapatite in ClA coatings was assigned to a side reaction with contaminating oxygenated species (O2, H2O). ClA coatings exhibited characteristics different from HA, showing a lower content of oxyapatite and amorphous phase. Although their adhesion strength was found to be lower than that of HA coatings, their application could be an interesting alternative, offering, in particular, a larger range of spraying conditions without formation of massive impurities.This study was carried out under a MNT ERA-Net Project named NANOMED. The authors gratefully thank the Midi-Pyrénées region (MNT ERA Net Midi-Pyrénées Région, NANOMED2 project) and the Institute National Polytechnique de Toulouse (BQR INPT 2011, BIOREVE project) for supporting this research work, especially the financial support for research carried out in the CIRIMAT and the LGP laboratories (France), and the Basque government and Tratamientos Superficiales Iontech, S.A. for their financial and technical support under the IG-2007/0000381 grant for the development of the LEPS device and deposition of the coatings carried out in Inasmet-Tecnalia.
The French industrial collaborators (TEKNIMED SA and 2PS SA) were financed by the OSEO programs
Guidelines for the use and interpretation of assays for monitoring autophagy (4th edition)1.
In 2008, we published the first set of guidelines for standardizing research in autophagy. Since then, this topic has received increasing attention, and many scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Thus, it is important to formulate on a regular basis updated guidelines for monitoring autophagy in different organisms. Despite numerous reviews, there continues to be confusion regarding acceptable methods to evaluate autophagy, especially in multicellular eukaryotes. Here, we present a set of guidelines for investigators to select and interpret methods to examine autophagy and related processes, and for reviewers to provide realistic and reasonable critiques of reports that are focused on these processes. These guidelines are not meant to be a dogmatic set of rules, because the appropriateness of any assay largely depends on the question being asked and the system being used. Moreover, no individual assay is perfect for every situation, calling for the use of multiple techniques to properly monitor autophagy in each experimental setting. Finally, several core components of the autophagy machinery have been implicated in distinct autophagic processes (canonical and noncanonical autophagy), implying that genetic approaches to block autophagy should rely on targeting two or more autophagy-related genes that ideally participate in distinct steps of the pathway. Along similar lines, because multiple proteins involved in autophagy also regulate other cellular pathways including apoptosis, not all of them can be used as a specific marker for bona fide autophagic responses. Here, we critically discuss current methods of assessing autophagy and the information they can, or cannot, provide. Our ultimate goal is to encourage intellectual and technical innovation in the field
Real-Time Telemetry System for Monitoring Motion of Ships Based on Inertial Sensors
A telemetry system for real-time monitoring of the motions, position, speed and course of a ship at sea is presented in this work. The system, conceived as a subsystem of a radar cross-section measurement unit, could also be used in other applications as ships dynamics characterization, on-board cranes, antenna stabilizers, etc. This system was designed to be stand-alone, reliable, easy to deploy, low-cost and free of requirements related to stabilization procedures. In order to achieve such a unique combination of functionalities, we have developed a telemetry system based on redundant inertial and magnetic sensors and GPS (Global Positioning System) measurements. It provides a proper data storage and also has real-time radio data transmission capabilities to an on-shore station. The output of the system can be used either for on-line or off-line processing. Additionally, the system uses dual technologies and COTS (Commercial Off-The-Shelf) components. Motion-positioning measurements and radio data link tests were successfully carried out in several ships of the Spanish Navy, proving the compliance with the design targets and validating our telemetry system
Magnetic properties of Fe oxide nanoparticles produced by laser pyrolysis for biomedical applications
4 pĂĄginas, 2 figuras, 1 tabla.-- Trabajo presentado al Bonsai Project Symposium: Breakthroughs in Nanoparticles for Bio-ImagingWe report on the magnetic characterization of Fe oxide nanoparticles by laser pyrolysis and the relationship between the preparation conditions and the magnetic response. It is shown that controlling the preparation conditions during the pyrolisis allows tuning the nanoparticles morphology and structure and consequently the magnetic properties of the nanoparticles. The nanoparticles are loaded into solid lipid nanoparticles without degradation nor significant modification of the magnetic properties.This work was supported by the STREP FP6 E.U. Project Bio-Imaging with Smart
Functional Nanoparticles (BONSAI) NÂș LSHB-CT-2006-037639.Peer reviewe
Reproducibility of the synthesis of iron oxide nanoparticles produced by laser pyrolysis
3 pĂĄginas, 1 figura, 1 tabla.-- Trabajo presentado al Bonsai Project Symposium: Breakthroughs in Nanoparticles for Bio-Imaging.-- PACS: 81.20.-n, 42.62.-b, 75.47.Lx, 75.50.Tt, 82.30.Lp.During the development of the BONSAI Project, the need for high quantities of iron oxide nanoparticles with some specific characteristics intensified the problem of the reproducibility in the nanoparticle production. Given the fact that the reaction yield for the production of the smallest and more homogeneous nanoparticles (BONFEX4) was very low (in the range of 1g/day), the process had to be repeated several times. These repetitions involved the use of three different CO2 lasers (two of monomodal gaussian beams TEMoo mode with spot sizes of 4 and 3.5 mm and one multimodal of 4 mm spot size). Keeping constant the rest of the experiment parameters (including the laser density) we obtained similar powders in nature as revealed by X-ray diffraction, and similar particle size distributions, but with different magnetic properties. When the same laser was used the reproducibility of the magnetic properties increased significantly.This work was supported by the STREP FP6 E.U. Project Bio-Imaging with Smart
Functional Nanoparticles (BONSAI) NÂș LSHB-CT-2006-037639.Peer reviewe
- âŠ