1,992 research outputs found
Integrated Care for Chronic Diseases – State of the Art
Chronic diseases represent a high cost for healthcare systems, for individuals, families, businesses and governments. The World Health Organization (WHO) estimates that an increase of 10% of chronic diseases is associated with a reduction of 0.5% of annual economic growth. Primary care has proven to ensure high levels of efficiency, effectiveness, equity, safety, timely and centrality of the patient achieving better health outcomes and lower costs. The Chronic Care Model (CCM) proposes a proactive approach in assisting the empowerment of patients and their community. The CCM contributes to improving the quality of care and health outcomes and the reduction of inequalities (e.g., ethnicity, social status) too
A neutron scattering study of the interplay between structure and magnetism in Ba(FeCo)As
Single crystal neutron diffraction is used to investigate the magnetic and
structural phase diagram of the electron doped superconductor
Ba(FeCo)As. Heat capacity and resistivity measurements have
demonstrated that Co doping this system splits the combined antiferromagnetic
and structural transition present in BaFeAs into two distinct
transitions. For =0.025, we find that the upper transition is between the
high-temperature tetragonal and low-temperature orthorhombic structures with
( K) and the antiferromagnetic transition occurs at
K. We find that doping rapidly suppresses the
antiferromagnetism, with antiferromagnetic order disappearing at . However, there is a region of co-existence of antiferromagnetism and
superconductivity. The effect of the antiferromagnetic transition can be seen
in the temperature dependence of the structural Bragg peaks from both neutron
scattering and x-ray diffraction. We infer from this that there is strong
coupling between the antiferromagnetism and the crystal lattice
Plankton DNA extraction from Sterivex filter units
The objective of this protocol is to provide a reliable and replicable method for the DNA extraction of lake micro-plankton to be used for downstream DNA analysis. This protocol is one of those proposed by the Eco-AlpsWater consortium to promote the implementation of High Throughput Sequencing (HT S) of environmental DNA (eDNA) in the biomonitoring and ecological assessment of water bodies.
The extraction is performed from samples filtered through Sterivex cartridges (Sterivex™ GP 0.22μm) and stored at -20°C, as described in the protocol dx.doi.org/10.17504/protocols.io.xn6fmhe, and with the use of the DNeasy® PowerWater Sterivex Kit (QIAGEN) with specific modifications adapted to plankton DNA extraction.
The application proposed here, in the context of EcoAlpsWater, aims at comparing DNA inventories to traditional phytoplanktonic inventories and at characterizing more broadly the micro-planktonic diversity through eDNA analysis (including bacteria).
This protocol is part of the deliverables provided by the WP1 of the Eco-AlpsWater project. All members of the EcoAlpsWater consortium (http://www.alpine-space.eu/projects/eco-alpswater/en/home) contributed to the optimization of this protocol
Noves dades sobre la producció de ceràmica medieval de Barcelona. La caracterització arqueomètrica del taller del Carrer de Carders
Arran de la troballa d'un taller ceràmic al carrer de Carders de Barcelona, datat entre els segles XII i XIII, s'ha dut a terme la caracterització arqueomètrica de 31 individus per tal de definir les característiques químiques i petrogràfiques de la seva producció. A més, s'han contrastat els resultats amb els obtinguts per a l'altre taller del segle XIII conegut a la ciutat, el del carrer de l'Hospital. L'estudi ha permès de definir el grup de referència (GR) del carrer de Carders, com també indicar l'existència d"individus procedents d'aquesta excavació però que es relacionen amb la producció del carrer de l'Hospital. I a la inversa, l'existència d'individus procedents del carrer de l'Hospital que es relacionen amb el carrer de Carders. Finalment, entre els materials procedents del carrer de Carders s'han identificat dues noves produccions no conegudes anteriorment
Design and fabrication of 3D-printed anatomically shaped lumbar cage for intervertebra disc (IVD) degeneration treatment
Spinal fusion is the gold standard surgical procedure for degenerative spinal conditions when conservative therapies have been unsuccessful in rehabilitation of patients. Novel strategies are required to improve biocompatibility and osseointegration of traditionally used materials for lumbar cages. Furthermore, new design and technologies are needed to bridge the gap due to the shortage of optimal implant sizes to fill the intervertebral disc defect. Within this context, additive manufacturing technology presents an excellent opportunity to fabricate ergonomic shape medical implants. The goal of this study is to design and manufacture a 3D-printed lumbar cage for lumbar interbody fusion. Optimisations of the proposed implant design and its printing parameters were achieved via in silico analysis. The final construct was characterised via scanning electron microscopy, contact angle, x-ray micro computed tomography (μCT), atomic force microscopy, and compressive test. Preliminary in vitro cell culture tests such as morphological assessment and metabolic activities were performed to access biocompatibility of 3D-printed constructs. Results of in silico analysis provided a useful platform to test preliminary cage design and to find an optimal value of filling density for 3D printing process. Surface characterisation confirmed a uniform coating of nHAp with nanoscale topography. Mechanical evaluation showed mechanical properties of final cage design similar to that of trabecular bone. Preliminary cell culture results showed promising results in terms of cell growth and activity confirming biocompatibility of constructs. Thus for the first time, design optimisation based on computational and experimental analysis combined with the 3D-printing technique for intervertebral fusion cage has been reported in a single study. 3D-printing is a promising technique for medical applications and this study paves the way for future development of customised implants in spinal surgical applications
Mapping the use of computational modelling and simulation in clinics: A survey
In silico medicine describes the application of computational modelling and simulation (CM&S) to the study, diagnosis, treatment or prevention of a disease. Tremendous research advances have been achieved to facilitate the use of CM&S in clinical applications. Nevertheless, the uptake of CM&S in clinical practice is not always timely and accurately reflected in the literature. A clear view on the current awareness, actual usage and opinions from the clinicians is needed to identify barriers and opportunities for the future of in silico medicine. The aim of this study was capturing the state of CM&S in clinics by means of a survey toward the clinical community. Responses were collected online using the Virtual Physiological Human institute communication channels, engagement with clinical societies, hospitals and individual contacts, between 2020 and 2021. Statistical analyses were done with R. Participants (n = 163) responded from all over the world. Clinicians were mostly aged between 35 and 64 years-old, with heterogeneous levels of experience and areas of expertise (i.e., 48% cardiology, 13% musculoskeletal, 8% general surgery, 5% paediatrics). The CM&S terms “Personalised medicine” and “Patient-specific modelling” were the most well-known within the respondents. “In silico clinical trials” and “Digital Twin” were the least known. The familiarity with different methods depended on the medical specialty. CM&S was used in clinics mostly to plan interventions. To date, the usage frequency is still scarce. A well-recognized benefit associated to CM&S is the increased trust in planning procedures. Overall, the recorded level of trust for CM&S is high and not proportional to awareness level. The main barriers appear to be access to computing resources, perception that CM&S is slow. Importantly, clinicians see a role for CM&S expertise in their team in the future. This survey offers a snapshot of the current situation of CM&S in clinics. Although the sample size and representativity could be increased, the results provide the community with actionable data to build a responsible strategy for accelerating a positive uptake of in silico medicine. New iterations and follow-up activities will track the evolution of responses over time and contribute to strengthen the engagement with the medical community
Renormalization group and logarithmic corrections to scaling relations in conformal sector of 4D gravity
We study the effective theory of the conformal factor near its infrared
stable fixed point.The renormalization group equations for the effective
coupling constants are found and their solutions near the critical point are
obtained, providing the logarithmic corrections to scaling relations.Some
cosmological applications of the running of coupling constants are briefly
discussed.Comment: 9 pages,LATEX fil
A time-temperature integrator based on fluorescent and polymorphic compounds
Despite the variety of functional properties of molecular materials, which make them of interest for a number of technologies, their tendency to form inhomogeneous aggregates in thin films and to self-organize in polymorphs are considered drawbacks for practical applications. Here, we report on the use of polymorphic molecular fluorescent thin films as time temperature integrators, a class of devices that monitor the thermal history of a product. The device is fabricated by patterning the fluorescent model compound thieno(bis)imide-oligothiophene. The fluorescence colour of the pattern changes as a consequence of an irreversible phase variation driven by temperature, and reveals the temperature at which the pattern was exposed. The experimental results are quantitatively analysed in the range 20–200°C and interpreted considering a polymorph recrystallization in the thin film. Noteworthy, the reported method is of general validity and can be extended to every compound featuring irreversible temperature-dependent change of fluorescence
Iloprost in Acute Post-kidney Transplant Atheroembolism: A Case Report of Two Successful Treatments
Cholesterol embolization (CE) is a rare and alarming post-transplant complication, responsible for primary non-function (PNF) or delayed graft function (DGF). Its incidence is expected to rise due to increasingly old donors and recipients and the extended criteria for donation. Therapy with statins and steroids has not been shown to be effective, while agonism of prostaglandin I2 has been reported to be useful in systemic CE. We report two cases of acute post-transplant CE in which intravenous iloprost (0.05 mg/kg/day) was added to standard statin and steroid therapy. In the first instance, CE was due to embolization from the kidney artery resulting in embolization of the small vessels; after a long DGF and 15 days of iloprost therapy, renal function recovered. The second instance is a case of embolization from the iliac artery of the recipient, where CE manifested as a partial renal infarction. After 5 days of iloprost administration, creatinine levels improved. Iloprost acts on vasodilation and on different inflammatory pathways, improving the anti-inflammatory profile. Post-transplant CE is difficult to diagnose and, if not treated, can lead to loss of function. Iloprost added to standard therapy could be beneficial in accelerating renal function recovery immediately after transplant
Vitamin B supplementation and nutritional intake of methyl donors in patients with chronic kidney disease: A critical review of the impact on epigenetic machinery
Cardiovascular morbidity and mortality are several-fold higher in patients with advanced chronic kidney disease (CKD) and end-stage renal disease (ESRD) than in the general population. Hyperhomocysteinemia has undoubtedly a central role in such a prominent cardiovascular burden. The levels of homocysteine are regulated by methyl donors (folate, methionine, choline, betaine), and cofactors (vitamin B6, vitamin B12,). Uremia-induced hyperhomocysteinemia has as its main targets DNA methyltransferases, and this leads to an altered epigenetic control of genes regulated through methylation. In renal patients, the epigenetic landscape is strictly correlated with the uremic phenotype and dependent on dietary intake of micronutrients, inflammation, gut microbiome, inflammatory status, oxidative stress, and lifestyle habits. All these factors are key contributors in methylome maintenance and in the modulation of gene transcription through DNA hypo-or hypermethylation in CKD. This is an overview of the epigenetic changes related to DNA methylation in patients with advanced CKD and ESRD. We explored the currently available data on the molecular dysregulations resulting from altered gene expression in uremia. Special attention was paid to the efficacy of B-vitamins supplementation and dietary intake of methyl donors on homocysteine lowering and cardiovascular protection
- …